AmateurRadio.com

Stations worked on 70cm tonight with 5W and a 2m big-wheel omni

This evening was the September 70cm leg of the RSGB’s UKAC contest, so I decided to give it a go with my 2m big-wheel and 5W SSB. The match on 70cms was very good, but I had no idea how it would actually work. Well, the answer is “very well” as you can see by the stations worked. Best DX was 182km. To say I was pleased is an under-statement!  I shall be able to use this antenna again in 70cm contests. I was also able to copy the new beacon NW of Leicester GB3LEU which was pretty good copy on 432.490MHz.

At the moment I am looking for a new rig, but I am prepared to wait some time. I have never been keen on running high power and 5-10W would serve me well. I like that the new IC7300 is SDR based, but I like that the FT991 includes 2m and 70cm.

At the moment I think I’ll just wait for the FT817 replacement. I hope this includes 4m, but it sounds like it uses the same IF as the FT991, so I guess 4m is unlikely. Ideally I think the IC7300s (10W version) would be a good bet, especially if this comes out with 4m too.

I dislike fans, so I assume the IC7300S and FT817 replacement will not have these? Lets hope ICOM market the IC7300S as a QRP radio in Europe. 10W pep is a decent power. Certainly enough power for most occasions.

UPDATE 0934z:   It would not surprise me if the FT817 replacement stayed at 5W but they also had a companion booster amplifier, maybe 20-50W. As we will be on the way down in the solar cycle next year (2016) this may be a reasonable compromise. What would they do about the auto ATU? I guess any bolt-on amp would have to have its own. I still think Yaesu seriously misjudged the market for this rig and the timing. There are so many FT817s out there and people have been gagging for a replacement/enhanced version for years. Now Yaesu is playing catch-up rather than leading. As I said yesterday, this new radio will need some seriously good features if it is to sell as well as the FT817 has done. Oh, expect some very good deals on the FT817ND early next year. The dealers will want to clear shelves in readiness of the new one.

This was me on the 2m FM net in East Cambridgeshire last night. There were only 3 of us on last night. These days I tend to use WSPR quite a bit as my voice is still pretty poor. We meet on 144.575MHz FM at 8pm local time most Mondays. Note, this is in the all-mode section. Newcomers are always welcome to join us. QSOs are never more than 1 hour and frequently much less.

Well, I optimised my 136kHz QRSS3 beacon match into my earth electrode “antenna” used on 472kHz and tested it in the house and right outside. All looked promising, so I headed for my local car-park about 1.8km  away. I was quite confident that with an E-field probe on the car I’d get a decent result. From the old QTH I got to the far side of Cambridge before I gave up as copy was so good!

Not a dicky bird – nothing at all, indeed I only got copy again when I entered our close at a range of a few hundred metres. As at VLF, the earth electrode “antenna” at this QTH is useless.

Not only that but at the end of the test I realise how poorly I still must be as I was totally exhausted. In my fitter days this test would have been totally trivial, but not any more. I think my trees and short baseline make this “antenna” totally out of the question at this QTH at LF. I need a better antenna for LF and MF use.

So, 136kHz was bad. A poor result and quite a lot worse than I was expecting. I was hoping for an encouraging result, but none was to be had.

FT991 from Yaesu

The ongoing saga of the FT991 price fall continues. The phrase in the title is from the latest advert by MLS in Radcom.  It looks like they know the price is too high but are looking to see who drops the price first – a kind of game of “chicken”. The best price advertised is £1139. Meanwhile the FT450D (HF and 6m) is just £499 from Waters and Stanton.  I confidently predict the price of the FT991 from the major retailers will drop to £999, or even less, soon.

If you are like me, then you always want to know the loss of your coax at 6m,2m and 70cm, possibly higher I found this very useful table to compare various coax cables at different frequencies. You may have your own favorite table! If not, I hope you find this one useful.

See http://www.w4rp.com/ref/coax.html .

As I have said several times before, there is only one commercial rig that I fancy currently and that is the Yaesu FT991 that covers all of HF plus 6m, 2m and 70cm. However the UK price is still too high so I can wait and wait until the price drops. At £999 it will get serious consideration, but not at any higher price. The only other rig I fancy is an FT817 replacement, which may come later this year. Most of my operating is QRP and a 5-10W rig would suit my needs well.