AmateurRadio.com

I should really get extra points for being out in the West Cumbrian winter but hey ho at least it wasn’t Corney Fell, that really is nasty in the driving rain.

Another reasonable attempt with the 5w and 3 ele beam. A bit frustrating tonight as I could here many stations much further away but just couldn’t work them but then again I’m not in it for the glory, just a bit of fun.

Here’s the map all the same. The east coast does get missed quite a bit but there is a lot of rock in the way.

For the last 3 years I’ve favoured begin part of one special event station. SOS radio Week. It is one of those events that seems to bring in a few QSO’s from all round the country to support one of the countries most easily forgotten about emergency service. Unless of course, like me, you live by the sea. The Royal National Lifeboat Institute (RNLI) has been running in some form or another since the year dot and its volunteers save lives at sea in all conditions. It is entirely funded by donations and the Workington club are once again putting on 3 stations and our sister club at Furness will be putting on a fourth to make up the ‘LBC’ or Lifeboat Cumbria set.

St bees is a very small village in West Cumbria and our lifeboat is thankfully not called out to often. My first close up encounter with them was a few years ago when they were called into action to rescue to young boys who had been jumping off the rocks and got into difficulty. During last years operation they were called out to rescue a fishing boat that had lost power and was drifting towards the head. I don’t think I’ve ever seen a £250k rib driven by a £350k submersible tractor down the slipway and into the water with such speed. There’s nothing particularly appealing about the Irish sea in January and I’d imagine that being under it is a tractor is even less appealing.

So this year, as with all years, we’ll be attempting to raise a bit of cash as well as awareness. the LBC group of stations have raised over £3000, approximately a third of the total raised by the whole country. This year we’ll add to that total and support our volunteers as best we can. Please keep an ear out for the stations between the 25th January to the 2nd February 2014 or have a look on the website SOSRadioWeek for all the other stations around the country. Band to be decided but this year we’ll have 2 stations, one for domestic and one for DX.

Gb1LBC – Silloth

GB2LBC – Workington

GB4LBC – St Bees

GB5LBC – Barrow

SOS Radio Week 2014 – 25th Jan to 2nd Feb

I’ve spent far too much time putting this blog back in line thanks to some dodgy code that got into my site. The site as a whole has shrunk a bit and I’m adding content back in as I go along. Its all very time consuming even though I have loads of back ups.

Having said that I’ve found a bit of time to do some planning for the new mast and feeders etc which I’ll order as soon as I get firm quotes for the building work I need to do for the extra room. There’s still a bit of a battle at home over the position of the thing which looks a bit like this one. They are fairly compact masts in as much as they are telescopic but pretty heavy too at 80+Kg.

Plans are to make up a tilt bracket and to mount it on the side of the new room (with enough space for a decent beam in the future).

With it being telescopic the feeder needs to be carefully considered so it doesn’t fracture from being raised and lowered regularly. This is part planning application and part saving antennas from strong winds and salt spray. Ideally a good quality VHF coax will be used for yep, VHF antenna’s but getting the right one is crucial to avoid expensive mistakes. Time for a chat to the DX shop I think.

So I’ve migrated as much as possible in the space of a couple of hours and there is some key material missing but frankly I’m not n the mood to move anything else. This will have to do for the time being. I will attempt to move everything from the WordPress site over time but its going to take a long time to do it if I can actually summon the energy.

WordPress is a great blogging platform but frankly I’ve had enough of being hacked. So to stop needing to spend hours and hours fiddling around with a website, which frankly isn’t much fun, I’ve moved things here until I get either the site sorted or a more secure platform to run things off.

Shame really as I’ve been with WordPress for many years and its done me well, but I just can be hassled with spending hour after hour going through code for a simple blog.

This evening was supposed to be a UKAC night for me but with strong winds and flooding earlier in the day I decided not to head up to Sandwidth with a 50MHz antenna, just in case it got nasty. Even though it looks quite down here in the valley (I’m not just talking about 50Mhz activity either- Only GI4SNA can be heard) the top of the hill will be muddy and potentially windy.

So what to do with the radio time. We’ll I’ve been carrying around a plastic case for some time wondering when I’ll get around to using it as a sturdy case for packing up my FT817 and taking on trips with. The case used to hold a complex vice but the parts are happier in my tool box. So i stripped out the old foam and measured up the insides. It measures just about the wrong size for the easy to use pick and pluck foam so I ordered a 5 mm base layer and 40mm deep top layer from eFoam. The job is fairly simple and needs only a very sharp long bladed knife and a bit of patience.

I laid out the rig, tuner, wall wart, battery, mic and a few odds and ends into the case and carefully marked out the positions using a steel rule and marker pen (making sure the marker pen was on the inside of the are to be cut as I didn’t want any left over pen. I suppose you could just as easily cut it and turn it all over  but that may require extra thinking.

So with holes cut out and the bottom layer done, like so (as they say on Blue Peter) there wasn’t much to do apart from fill it up with the goodies. So with a free(ish) plastic case and a few quid’s worth of foam I’ve got a budget Pelicase. Probably just as sturdy for my needs and significantly cheaper.

Just one reminder, the blade needs to be very sharp and a light sawing action seemed to cut the foam nice and smoothly. Just one last thing to do is to raid the spare elastic department (If we have one) and form a kind of retaining strap for the bits in the lid.

Who said UK activity night should be limited to on air activity?

Whilst leaning out of the car window and manually turning my decorators pole (complete with 70cms antenna) and waiting for a break in a UKAC (VHF Contest) QSO I thought that there must be a better way of doing this.

The antenna weights way less that 1Kg and the decorators pole has a perfect coarse thread to it so it shouldn’t be too hard to make up a simple attachment with a stepper motor on it, driven of course by the mighty Arduino and its motor shield

Although I’ve not put one of these together and its a bit of a pipe dream whilst work keeps sending me all over the place I’ve seen more that my fair share of articles that use the motor shield to drive stepper motors (guessing its some kind of H bridge / relay arrangement). So I’m guessing (again) that the bare bones of the system could be pulled together over winter. ready in time for next years UKAC series.

I enjoy the UKAC series but running /P has its unique problems up here in West Cumbria. As I type now the winds are getting stronger and we expect the gale force variety over the weekend. Even when we’re not being blasted with salty Irish Sea venturing out /P means that having a car window open in the winter on the top of a hill is ‘challenging’.

So the challenge is on me now to come up with something now that my work project is attempting to shift from ‘Madness’ to simply ‘Frenetic’ between now and November and possibly simply ‘Stressful’ in December.

Once that’s done…hah ha…I’ll concentrate on the single boom  6m / 2m /70cms antenna I’ve been thinking about that means I don’t have to crawl around in the dark with loads of bits in the car.

Still if someone’s done it already, please put me out of my suspense.