AmateurRadio.com

I attended a great fox hunting presentation at Dayton this year, hence a few posts on the topic.

I had some posts in the past about tape measure beam antennas.  Really neat antennas and they have multiple purpose use (they are GREAT for hitting distant repeaters when you orient them vertically!).  Much like the picture on the right (courtesy of Joe Moell K0OV) they are more useful for fox hunting when you add the active attenuator to your setup.  FYI, Joe is the co-author of the great book “TRANSMITTER HUNTING, Radio Direction Finding Simplified” available where most ham books are sold.  His website has more information on the book at http://www.homingin.com/THRDFSinfo.html and he contributes to CQ and CQ VHF.

So….. just what is an offset attenuator?  Joe explains it on his “Homing in” site as:

An RF attenuator is a device that goes between antenna and receiver to reduce the signal strength down to within the range that the receiver S-meter can handle. Without one, you may think you’re close to the fox when you’re still far away. You won’t be able to get close enough to a camouflaged hidden T to identify it. The amount of attenuation should be adjustable so that you can add just a little when your S-meter first pins, up to a lot as you get within a few feet. Special ARDF receivers used by champion foxhunters have electronic attenuation built in, but ordinary handi-talkies don’t. Adding it would require major micro-surgery in the HT.

His attenuator page is:

http://www.homingin.com/joek0ov/offatten.html

I recommend his site in general, many great projects:

http://www.homingin.com

On his attenuator page, he has full schematics to make an offset attenuator.

But wait…… there’s more!

Further on his page, you see one made in a sweet Pomona box.  I like this box and thought it was a bit pricey at first, until I did the math and figured out the cost/time to do it myself.  These boxes are shielded with the connector of your choosing (BNC/SMA/259, etc).

They generally cost around $25 or so and are shielded!  Great to have.  When you add the cost of connectors and such, it isn’t really so expensive after all.

I really advise using such a case or a metal case in general, makes things work out much smoother in the end.  More information on this box at: http://www.pomonaelectronics.com/index.php?i=prodsub&parent=BOX&cat=BONCONN&getDetails=

But wait….. there’s even more!

Marvin Johnston KE6HTS is now offering a “semi-kit” for this attenuator on his website.  I’ve seen this kit when I was at Dayton this year and encouraged a friend to pick it up and build.  I may end up running a buildathon here in CT on these attenuators.

The price is really not bad at $22.00.  You can purchase them built for a few dollars more.

Information on the kits and pre-built models are at:
http://www.west.net/~marvin/k0ov.htm

And yep……. there’s even more (again!).

If you would like to “roll your own” from parts you may have on your bench, but don’t want to make a circuit board, you can get one from……. you guessed it…… Far circuits.  I picked one up and am going this route myself.

There are a few boards/projects on the Far circuits website at:

http://www.farcircuits.net/

There are a ton of great resources out there on the web, these will really get you going right from the start.  Fox hunting is a really fun and useful part of our hobby and one that doesn’t cost a ton of money to get started in.  If there are no active fox hunts in your area – start ‘em!  There are plenty of options as far as transmitters and such and really doesn’t cost a club much money to get started.

Spud guns or “potato cannon’s” have been around for a long time.  For some reason, I’m shocked that more hams don’t use them for putting up wires.  QST did an article awhile back on the topic getting people started, but not a lot of activity since (at least from what I’ve found online and locally).

The setup on the right here is the CSV19, instructions (and kits available) are on their website at:

http://www.antennalaunchers.com/csv19/csv19asm.html

There is a ton of information on the web.  Unfortunately, a lot of what used to be freely available ended up not being so anymore since people decided to make businesses out of sites that used to give the information away – BAD WEBSITE!  BAD!

Anywhooo……

There is still some other interesting sites with plenty of information.  On that end, I send you to Philip Mayfield.  He has a site with full details on various methods, air displacement, etc. on his site at:

http://www.sigmazone.com/TennisCannon_FullFactorial.htm

I’ve limited this to pneumatic cannons for a reason, the combustible versions are VERY simple.  I just don’t like the mess they leave behind (though they are fun).  Combustion mortars are fun too……. but I digress…..

There is a FANTASTIC video with step by step instructions courtesy of Patrick Norton (of ZDTV fame, then on various shows on the Digg networks).  He did a video on Systm (now canceled program) that is still freely available online – SWEET!

The video below is also available as a downloadable file:

If you want to download the show, or read show notes, visit them at:

http://revision3.com/systm/tennis

If you know of any other resources available online, please post in the comments.

First off…. sorry for the delay in posting (never took three weeks off before).  As the Amateur Radio Emergency Service District Emergency Coordinator, we had a TON of public service events and I had a couple of public speaking engagements (radio related), soooo………….  But I plan on posting several posts to make up for the shortfall – there is just too much interesting stuff for amateur radio ops on the web!

Which brings me to the Annenberg Project and their series “The Mechanical Universe and Beyond”.  Really great series and I’m thinking about purchasing on DVD for some of my classes – there’s a ton of information here that will indeed pertain to hams.

The course description reads:

This series helps teachers demystify physics by showing students what it looks like. Field trips to hot-air balloon events, symphony concerts, bicycle shops, and other locales make complex concepts more accessible. Inventive computer graphics illustrate abstract concepts such as time, force, and capacitance, while historical reenactments of the studies of Newton, Leibniz, Maxwell, and others trace the evolution of theories.

But, in the middle of the course are some good videos for new hams (and those that want to reinforce some of the theory in radio physics):

14. Potential Energy
Potential energy provides a powerful model for understanding why the world has worked the same way since the beginning of time.

15. Conservation of Momentum
What keeps the universe ticking away until the end of time?

16. Harmonic Motion
The music and mathematics of periodic motion.

17. Resonance
Why a swaying bridge collapses with a high wind, and why a wine glass shatters with a higher octave.

18. Waves
With an analysis of simple harmonic motion and a stroke of genius, Newton extended mechanics to the propagation of sound.

28. Static Electricity
Eighteenth-century electricians knew how to spark the interest of an audience with the principles of static electricity.

29. The Electric Field
Faraday’s vision of lines of constant force in space laid the foundation for the modern force field theory.

30. Potential and Capacitance
Franklin proposes a successful theory of the Leyden jar and invents the parallel plate capacitor.

31. Voltage, Energy, and Force
When is electricity dangerous or benign, spectacular or useful?

32. The Electric Battery
Volta invents the electric battery using the internal properties of different metals.

33. Electric Circuits
The work of Wheatstone, Ohm, and Kirchhoff leads to the design and analysis of how current flows.

34. Magnetism
Gilbert discovered that the earth behaves like a giant magnet. Modern scientists have learned even more.

35. The Magnetic Field
The law of Biot and Sarvart, the force between electric currents, and Ampère’s law.

There’s more, but this will give you an idea of the valuable resource.  The video clips are viewable online (though rather small).  I haven’t inquired yet as to the cost of the course on DVD.

Available at:

http://www.learner.org/resources/series42.html?pop=yes&pid=587#

Post update:

I have found the link for the cost of the series – $450. YIKES!

http://www.learner.org/catalog/series42.html

So, here I was at Dayton a few weeks ago and decided to check out the fox hunting/amateur radio direction finding (ARDF) forum.  I forgot who did the forum, but it was actually very well done.  One of the projects I learned about was “The Montreal Doppler”.  This is a really neat project designed by Jacques Brodeur, VE2EMM.

I saw many neat attenuators, offset attenuators….. but this….. well…. it has LEDS!  Pretty lights…. OK, I digress.  Working with a bunch of these LED’s is pretty kewl and looks sweet.  This is a project that is well documented on the web and I’ll provide links below.

The biggest question I had was, where do I get the microcontrollers and firmware.  Not only was I able to acquire the PICS (microcontrollers), but I was able to get PC boards and the LCD for a very reasonable price from FAR Circuits!  I know I picked up the last one he had at Dayton, but he may be able to do more (they cost $45.00).  Check out the FAR circuits website at http://www.farcircuits.net/

A little about this project from VE2EMM’s website, list of features:

–   36 LEDs display; center LED when green = good signal, when red = no signal ,  the direction is frozen to the last good signal.
–   Uses 3 PICs; a PIC16F628A for the display, a PIC18F4520 as the main processor and a PIC12F675 as a frequency divider.
–   Filters; a Max 267, the best bandpass filter that I have ever seen, followed by the Roanoke switch cap filter for very narrow band width (+/- 0.5Hz).
–   My DopplerII integrating and phase detection software in the main PIC.
–   LM386 for monitoring the audio independently from the doppler.
–   Simpler menu selection, turning a selection pot and a pushing a DO switch.
–   It will switch 4 antennas with a + or – going signal, 4 antennas differential, 8 antennas with a + or – going signal.
–   Pushing the DO PB sends the direction to APRS.  The protocol is:  <cr><lf>%359/Q<cr><lf>. The Q (0<8) is the quality of the signal just before the
extraction of the phase information.
–   GPS information goes through the doppler, it will be instantly interrupted when the doppler sends a DF to APRS on a PC.
–   Faster main processor, PIC18F4520.    **** NEW ****  June 06

The model I saw really intrigued me and there are a few really well done websites devoted to this project (it has quite the cult following).

The original site is at:

http://www.qsl.net/ve2emm/pic-projects/doppler3/doppler3-e.html

Here is another page on Jacques site that has some examples from other builders:

http://www.qsl.net/ve2emm/pic-projects/doppler3/md3_photos/dopler%203%20pictures.html

KA7OEI has a neat page with a bunch of information on this project:

http://ka7oei.com/emm3.html

He has a lot of information about an alternate firmware that looks like the image below:

The alternate firmware page is at:

http://ka7oei.com/emm2_mont2a.html

If you have any more information on this project, resources or anything of the sort, please comment below.

Every now and then, a little gem comes along, something that just works right.

I recently stumbled on a piece of software called “WorkedGrids” by Bertrand Zauhar, VE2ZAZ.  This software, of course, is geared towards those of you in the VHF and up crowd.  Satellite, VHF/UHF/Microwave sidebanders and such.  Bertrand describes it as:

WorkedGrids is a Windows application that displays a map showing the amateur radio grid squares contacted and logged in using a third-party logging program. WorkedGrids uses colors to display information on a per-band basis. Up to four bands can be displayed concurrently.

As you can see by the image on your right, there are plenty of color coded grid squares telling you how you worked a station.  Swell stuff really!  Being a “1 call”, I thought it was neat that the image he uses on his site was centered right on my area.  Some of those spots are indeed hard to work, but I digress…….

The beauty of this software is it’s not “logging” software, it’s really QSO mapping software.  You use your logging program of choice.  If it doesn’t have a similar feature, you can export your log and then load it into this program and Voila!  All set.

System requirements:

Operating System: Any 32-bit version of Windows from Windows 95 to Windows Vista. Most likely 64-bit versions of XP and Vista as well, but untested so far.
Minimum CPU Hardware: Pentium-Class CPU, preferably Pentium-II or faster for quicker map refresh.
Display: 640×480 or higher resolution, 256 colors or more.
Disk usage: 1MB
Typical RAM usage: < 10MB, varies as a function of Map window size.

So why not give this gem a try?  You can find it at:

http://www.ve2zaz.net/WorkedGrids/WorkedGrids.htm

Ed note:  This is a new category for our site and I hope to have future “Shack Showcase” entries.  I don’t know how many will be like George below…… but…….

OK, really?

George, why do you have to make us look THIS bad.  Really man……. thanks!

I stumbled on George’s website and QRZ bio recently and it took me days to pick my jaw up from the floor.  I’ve learned a lot from my elmers, but this guy has it all.

Here’s a little info about George from his QRZ page (which has more lookups than any I’ve seen yet – almost 150,000):

George Ulm, W9EVT was born in the Free City of Danzig in 1930. In the mid-1930s he moved to Chicago with his family. After W.W.II, he produced some of the first convention exhibits for the Radio Parts Show in the Windy City. His business later expanded to world’s fairs and conventions such as the CES in Las Vegas and Chicago. George is a Korean Conflict veteran, taught electronics in the Navy Air Corps, developed and put on air the first two meter amateur repeaters in the mid west.

George has lived in Mexico, Europe, Africa and Australia with ham calls associated with each part of the world. In the early 1960s he purchased an apple and cherry farm on Washington Island, WI. At retirement he decided to raise antennas on the property instead of fruit. He lives there year round with his wife, Susan, his dogs, Ivan and Bosun and a very talkative African Gray Parrot, B.B.

Look at one (trust me….. he has many) of his vintage operating positions:

And, unlike a lot of guys that have been active since before I was even born, let alone licensed…… he’s more than made the jump to modern technology:

Here is just some of the eye candy:

George also has a rental property on the island if you’re looking for a little spot to relax.

George’s information can be found on his QRZ page at:

http://www.qrz.com/db/w9evt

Or his personal page at:

http://www.greengate-wibb.com/?page_id=5

If you know of any shacks that I should feature (in this new category) feel free to contact me via the contact form or comment below.

As mentioned previously, since I was a kid (long before being a radio amateur) I’ve been fascinated by numbers stations.  Every now and then I go on a search online to find more sites to satisfy my curiosities – there’s tons of ‘em out there.

This time, let me take you to the URL of Simon Mason, but he has a disclaimer about the material on his site:

The information presented in this section is for entertainment purposes only and does not disclose any information not already in the public domain. No assassination attempts are required! Thank you.

Rather tongue and cheek, but…… one can never be too sure!

His site looks rather old, but don’t let that discourage you – there is a TON of stuff here (and it’s updated).  Not only are there plenty of pages devoted to various numbers stations, but a plethora of videos and radio shows devoted to the subject.

Simon has written a small book that is freely downloadable on his website called “Secret Signals:  A Euronumbers Mystery” (available in HTML and MS Word format).

I can go on and on about the site, but just go check it out!  If you like this sort of thing, you’ll be there for hours!

http://www.simonmason.karoo.net/page30.html