Most automobiles don’t provide a lot of room for mounting ham radio transceivers. (Obviously, their design priorities are wrong!) Because of this, many ham transceivers have removable control panels that can be mounted on the dashboard and the main radio is installed somewhere else, such as under a seat.

Midland radio is doing some interesting things with micro-sized radios for the General Mobile Radio Service (GMRS). The MXT275 MicroMobile® Two-Way Radio puts all of the radio controls and the display in the handheld microphone.

Yaesu FT-8500

This radio reminded me of an old Yaesu radio, the FT-8500, which had almost all of the controls crammed onto the microphone. (Someone named the microphone “Mr. Potatohead” which seems appropriate, but I did not name it.) This radio had the display on the radio body, which seems like a limitation. At any rate, this rig was not very popular. I do not know anyone that owned one.

So the FT-8500 was not a big hit but maybe it is time for another go at a microphone-centric transceiver. I am thinking a basic 2m/70 cm FM radio could use this approach to ease the mobile installation challenge.

Simplicity in Design

You may be thinking that a GMRS radio is fundamentally simpler than a typical VHF/UHF ham transceiver.  This is true…a typical GMRS radio has 22 channels that might have options such as CTCSS tones and repeater offset. A typical ham transceiver has more frequencies, more features, and lots of settings required.

However, if you consider the typical FM transceiver setup and usage, most people set up the memories for the repeater and simplex channels they use, usually via programming software. After that, operating the radio is 99% just selecting the desired memory channel. This kind of usage lends itself to having a simpler set of controls that can be incorporated into the microphone. This approach will require a good understanding of user needs and some careful design work to create a radio that works well.

This type of radio design will probably not work for everyone. There will be hams that want every feature available all of the time.  That’s just fine. However, the microphone-centric approach may be a good fit for installation in the “other car” that doesn’t get used quite so much. Or in the case where a family member objects to having a Real Radio cluttering up the dashboard.

Using this type of radio will be a lot like using a handheld transceiver, with the addition of a microphone cable,  but no batteries or antenna cable drooping down. The Midland radio has the speaker in the radio unit but it may be better to put it in the microphone (with the option of plugging in an external speaker.)

I think this idea would well for some number of mobile radio installations. What do you think?

73 Bob K0NR

The post How About A Mic-Centric Mobile Transceiver? appeared first on The KØNR Radio Site.

We had a great time going after the W0C 10-10-10 SOTA Challenge. (See 2021 Colorado SOTA and 14er Event ) For activators, the objective was to activate 10 summits higher than 10k feet in 10 days. It turned out that some previous commitments would not allow us to do 10 days of activating, so we smushed 10 summits into 6 days. With careful choice of summits and doing multiple summits in a day, we put together a plan.

Saturday and Sunday started off with the Colorado 14er Event, so we opted to do Pikes Peak on Saturday and Mount Evans on Sunday. These are both drive-up summits, so not a lot of hiking. As previously reported, we had some good luck with 1.2 GHz from those summits. Then, on Monday we hiked Puma Peak and Little Puma, two 11k summits in South Park. On Tuesday, we did three summits on one day: Dicks Peak, 10090 and 10715. These three hikes were not particularly difficult but doing all three made for a full day.

On Wednesday, we took the Jeep up to Mosquito Pass and hiked two 13ers: Mosquito Peak and London Mountain. We had previously activated those two summits in 2018. Finally, on Thursday, we did our tenth summit with Walt/W0CP and Jerry/K0ES, one of our favorites: South Monarch Ridge. Walt and Jerry worked the HF bands while we did VHF/UHF. That was a slacker day, because we rode the tram up from Monarch Pass.

The weather was consistently fantastic, with no thunderstorms in sight. The smoke from western wildfires was thick at times and can be seen in some of the photos.

The Bands

As usual, we operated above 50 MHz, focusing on 2m, 70cm and 23cm FM operation. Most of the contacts were on 2m FM but we had significant activity on the other bands. The 1.2 GHz work was really fun: Using 1.2 GHz in the Colorado 14er Event. I made 162 contacts and Joyce made 94, for a total of 256 for the week. Not bad!

Thanks to all of our chasers and fellow activators:  AC0FT, AC0FY, AC0V, AD1CT, K0AVU, K0BEJ, K0EHR, K0ES, K0FYR, K0GPA, K0GPA, K0MGL, K0MOS, K0REW, K0SJP, K0TRD, K1DDN, K5RHD, K6TUY, K7ASB, KA4EPS, KB0KQI, KB6VHF, KC0PBR, KC3BHI, KC5CW, KD0MRC, KD0VHD, KD0YOB, KD8EQA, KE0BTX, KF0DGK, KF0FOG, KG5APL, KJ4DER, KL7GLK,
KL7IZW, KM4PEH, KM5TY, KN0MAP, KX0R, KX3DX, N0DET, N0EMU, N0IPA, N0IVN, N0KM, N1SMB, N1XCO, N8XBD, W0ADV,
W0BV, W0CP, W0JSL, W0OOD, W0RW, W1KGH, W3REM, W5IG, W6AUN, W7UM, WA0KXO, WB0JNS, WB0TNH, WZ0N

Challenge Results

The results for the W0C 10-10-10 Challenge have been posted, for both activators and chasers. Here are the Activator results:

Six activators met the challenge of doing at least 10 summits during the event. That was our goal…not pursuing the top of the list but we did want to get 10 summits done. I am fifth on the list and K0JJW came in at sixth. We had the same number of SOTA points because we did the same summits. I had more QSOs though.

It was a fun event and we were happy to be able to activate 10 summits. Fortunately, the weather was good, otherwise we might have gotten rained out on the longer days.

73 Bob K0NR

The post SOTA W0C 10-10-10 Challenge Report appeared first on The KØNR Radio Site.

Joyce/K0JJW and I have been doing Parks On The Air (POTA), in addition to our normal Summits On The Air (SOTA) activations. Sometimes we do both simultaneously.  (See More on SOTA and POTA.) SOTA will probably continue to be our top priority because, well, you just can’t beat operating from the summit of a mountain.

SOTA and POTA

The programs have a lot in common but still have some significant differences. One of the key differences is that SOTA inherently puts you outdoors and away from your vehicle. This happens naturally if you hike some distance to get to a summit. But even on a drive-up mountain, the rules (W0C ARM) say:

Operations must not be in, or in the close vicinity of a motor vehicle, cannot use a permanent electrical power source, nor use a fossil fuel generator in any fashion. No part of the station may be connected in any way with the motor vehicle. All equipment must be operated from portable power source (batteries, solar cells, etc).

I have come to appreciate the wisdom of these restrictions as it helps keep the program “backpack portable,” without being overly restrictive. POTA does not have these restrictions, so it is common to see POTA activators operating from inside vehicles, inside RVs, even inside buildings using commercial power. Quite different from SOTA and I suppose that’s just fine. It does provide a higher degree of flexibility and radio hams can choose to participate in a manner that works for them. Certainly, this is a good thing for physically challenged individuals.

Here is a definition of “park” as it applies to national, state and local parks.

Park (noun):
an area of land, usually in a largely natural state, for the enjoyment of the public, having facilities for rest and recreation, often owned, set apart, and managed by a city, state, or nation.

The main idea of visiting a park is for people to enjoy being outdoors in a natural setting.

My POTA Rules Guidelines

Everyone gets to decide “how to POTA” as long as they stay inside the POTA rules.  We’ve adopted these guidelines to keep POTA oriented towards outdoor, portable radio operating.

1. Set up outdoors Get outside the vehicle and find a place to set up outdoors. At a picnic area or campsite, this might be using a picnic table or it might be setting up on a stump, on a rock, or on the ground. Whatever works. Even a tailgate-style operation is better than just sitting in the car.
2. Take a hike Before or after the activation, take a hike. Get some exercise and explore the park. A mile or two of walking in the forest is usually a good thing.
3. See the park Some parks are not very hikeable, but you can still explore what is special about the place. Look around to see what is interesting about the park and why it exists.

Note that these are guidelines and not strict rules. This is what we try to do for a POTA activation. There will be times when this is not practical and that’s OK, too. Sometimes we’ll do a Drive-Up/Drive-By activation when time is limited or the weather is bad. For example, I recall a recent winter activation in K-4407 where the temperate was -3 deg F. We stayed in the truck for that one!

So keep on POTAing and having fun with ham radio.
These are my thoughts, what do you think?

73 Bob K0NR

The post My POTA Activation Guidelines appeared first on The KØNR Radio Site.

Last weekend we held the Colorado 14er Event (Aug 7 and 8), the annual mountaintop event in Colorado. A group of us used this weekend as an opportunity to make 1.2 GHz (23 cm) Summits On The Air (SOTA) contacts: K0NR, K0JJW, KM4PEH, K5RHD, W0ADV, KL7IZW, W0RW, KC5RW, and K0BEJ.

Many of the 1.2 GHz operators used the Alinco  DJ-G7T triband handheld transceiver. This radio covers the 2m, 70cm and 23cm bands. The RF output on 23 cm is only 1 watt but it is the lowest-cost way of getting a signal on that band.

Pikes to Uncompahgre

On Saturday, Joyce/K0JJW and I were on Pikes Peak (W0C/FR-004) and worked Randy/K5RHD on Mount Evans (W0C/FR-003) at a distance of 97 km (60 miles). Signals were strong and we had no problem making those contacts.

We also worked David/W0ADV on Uncompahgre Peak (W0C/RG-001) at a distance of 227 km (141 miles). David used the Alinco HT driving a 16-element Comet Yagi. We had a bit more power (10 watts) from our Kenwood TM-541A transceiver, also driving a Comet Yagi antenna.  Signals were strong in both directions and these QSOs were a new personal best for both Joyce and me on 1.2 GHz.

Evans to Sunshine

On Sunday, we moved to Mount Evans and Randy/K5RHD activated Pikes Peak. We worked Randy on that peak, the reverse of the QSO on the previous day. Meanwhile, David/W0ADV was climbing two 14ers in the San Juan Mountains: Redcloud Peak (W0C/RG-002) and Sunshine Peak (W0C/RG-004). These two summits are close to each other, separated by a saddle, so it is common to climb them as a pair.

David’s route had him climbing Redcloud first and then continuing on to Sunshine, then returning to Redcloud on the way back down. We worked him on Sunshine and on the return trip over Redcloud, as he headed back to the trailhead.

We had trouble hearing David on Sunshine Peak but his signal was just strong enough that we could complete the contact. His signal was stronger from Redcloud, a surprise because the two summits are close in elevation. I expected them to be about the same in terms of signal path and strength. David reported that there was a ridge to the northeast of Sunshine that might be blocking the signal, but it was not in the way for Redcloud.

So these contacts with Sunshine Peak set a new personal best for both Joyce and me on 1.2 GHz (244 km, 152.6 miles). David clearly did the hard work, summiting two 14ers in a day. (We were on a drive-up mountain with a short hike.) Thanks, David/W0ADV!

I was very pleased with the results from the 14er weekend. Now I am wondering what’s next for us concerning 1.2 GHz. We can probably make radio contacts further out but it is going to depend on the topography of the path. We will have to do some investigation on additional summits to try.

73 Bob K0NR

The post Using 1.2 GHz in the Colorado 14er Event appeared first on The KØNR Radio Site.

Decibels are commonly used in electronic communications to describe and compare signal levels. I’ve often heard that one dB is considered to be the smallest change that a typical person can detect by ear. I recently came across this website audiocheck.net that is set up to generate different audio tones and to do a blind test of how small of a change you can detect.

I started with testing for 6-dB and 3-dB changes. Easy Peasy. Then I tried the 1-dB test. I could detect the change in level fairly consistently but I did have to concentrate. Continuing on to the 0.5-dB change, I had a very high failure rate. It was very difficult to detect that small of a change. So I have to conclude that 1 dB is about the limit for a change I can hear.

How about you? Take the test on the website and let us know how you did.

There are many other audio tests to explore on that site, including the highest frequency you can hear, the minimum pitch change you can hear, etc. Check it out: www.audiocheck.net

73 Bob K0NR

The post Can You Hear a 1-dB Change? appeared first on The KØNR Radio Site.

Lately, I’ve been talking with people in search of basic radio communications for their friends or family. They end up talking to me because someone steered them to ham radio as a solution and I teach ham radio license classes. Of course, I am happy to pull them into the wonderful ham radio world but sometimes the General Mobile Radio Service (GMRS) might be a better way of meeting their needs.

I have a GMRS license and have written about it. See GMRS: The Other UHF Band.  GMRS is a good fit for local communications, perhaps just using simplex or with repeaters, if available in your area.  FCC regulations (Part 95) require you to have a license (and pay a fee) to use GMRS. Unlike ham radio, the license does not require you to pass an exam and the license is valid for you and your family members.

Common Uses

GMRS works well for family communication “around town” or some local area. Depending on the type of equipment used, simplex range of 10 or 15 miles is achievable, maybe more. The use of repeaters can extend this a lot further. You might even decide to put a GMRS repeater on the air, which is not too difficult of a project.

Another common use of GMRS is when a group is traveling down the highway in multiple vehicles. Yes, you might be able to just use your mobile phone to stay in touch but a two-way radio may be a better solution (especially when mobile phone coverage is poor or non-existent). Many off-road vehicle clubs have discovered GMRS and use it for communicating during trail rides.

GMRS is also a great tool for outdoor activities such as camping, hunting, hiking and skiing. It is a handy way of staying in touch with your tribe, while not depending on the mobile phone network.

GMRS Is Not FRS

GMRS often gets confused with the Family Radio Service (FRS). They both include the use of inexpensive, low-power handheld radios and they share many of the same frequencies. When the FCC authorized FRS, GMRS was already an established radio service and it squeezed FRS into the same band. FRS radios were limited to lower output power, so many manufacturers decided to offer combination FRS/GMRS radios, which operated at higher power levels. The user was supposed to obtain a GMRS license to use this type of radio but most people didn’t bother with it. (Most people probably didn’t even know of the requirement.)  The FCC also specified 2.5 kHz (half deviation) FM for the FRS radios on the same channels as the existing 5 kHz deviation GMRS radios. Intermingling an unlicensed radio service with a licensed service was probably not a wise move. In general, the FCC regulations caused a lot of confusion between the two services.

In 2017, the FCC adopted a major revision to the GMRS rules to clean up some of the problems with the service. In particular, the regulations now prohibit the sale of combination FRS/GMRS radios. A great idea but a bit too late in the game.

The GMRS rules are pretty easy to understand, so take a look here: FCC Part 95 – Personal Radio Services

Equipment

There are basic handheld transceivers for GMRS. They look and act a lot like the FRS radios that are widely available, but GMRS can provide more capability. An advanced handheld radio will have support for using repeaters (transmit offset) and higher power (up to 5 watts).

To dramatically improve the radio range, you can use GMRS mobile and base stations that can run even more power, up to 50 watts. More importantly, you can use external antennas on your vehicle or your house. These can make a huge difference in performance. (FRS is limited to handheld transceivers and the permanently-attached rubber duck antenna.)

For radio amateurs, this should all sound pretty familiar. GMRS looks and acts a lot like an FM transceiver on the 440 MHz (70 cm) band. It is a great alternative for local radio communications for people not interested in a technical hobby such as amateur radio.

The post GMRS: Basic Radio Communications appeared first on The KØNR Radio Site.

The Summits On The Air (SOTA) program originated in the United Kingdom but has propagated to most countries around the world. The program came to Colorado on May 1st, 2010 with Steve/WGØAT sending a CQ from Mount Herman, just west of Monument. Today, the SOTA program in Colorado (called WØC-SOTA) is very active with roughly 180 activators that operate from Colorado summits.

To celebrate our 10th Anniversary, WØC-SOTA is organizing a 10-10-10 Event with a challenge for Activators and Chasers alike. (Activators operate from summits, Chasers try to contact them.)

Activator challenge: Activate 10 (or more) 10K feet (or higher) summits (in Colorado/WØC) within 10 days.

Chaser challenge: Chase Activators on 10 different (or more) qualifying WØC summits (10K or higher) within the 10 days.

Event Date: We will kick-off the event in conjunction with the Colorado 14er event on August 7th, 2021 and conclude on August 16th.

Everybody is invited to participate, either as an Activator or a Chaser. Block off these days in your calendar now and start planning for how you can participate. Feel free to operate as much or as little as you would like. It is all about having fun messing around with radios. Any HF, VHF or UHF band can be used for making SOTA contacts, with the most popular ones being 40m (CW & SSB), 20m (CW & SSB) and 2m (FM).

Note that the recommended 2m FM frequencies for the 14er event have changed to:

146.580 FM   North America Adventure Frequency
146.550 FM    Simplex Alternate
146.490 FM    Simplex Alternate
146.520 FM    National 2m FM Calling Frequency
(as needed, please don’t hog the calling frequency)

There will be a leaderboard on the W0C-SOTA website showing all participants who meet one of the challenges. More details will be announced on the WØC-SOTA Website as soon as they are hashed out.

For more information on the SOTA program in general, see the worldwide SOTA website.

Full Disclosure: May 1 is actually the 11th Anniversary, but the COVID-19 Pandemic interfered in 2020, so we are catching up.

The post 2021 Colorado SOTA and 14er Event appeared first on The KØNR Radio Site.