AmateurRadio.com

 The Practical Amateur Radio Podcast episode 53 is now available for download or stream.  I’ve also updated the audio player used on MyAmateurRadio.com to work across multiple platforms including portable devices such as iPhone and iPad. 

In this episode I discuss RST Signal Reports.  I provide details into what each of the numerical values mean and my own thoughts about their use.  In the featured website segment I introduce the new amateur radio podcast from Gary Pearce, KN4AQ titled Ham Radio Now. 

Please visit MyAmateurRadio.com to listen or download this new episode. 

Thank you for listening and thank you for sharing your knowledge with others.  The Practical Amateur Radio Podcast, creating Elmers one podcast at a time.

Until next time…

73 de KD0BIK

In addition to my amateur radio blogging, I also host an amateur radio podcast titled the practical amateur radio podcast (PARP).   I began podcasting about amateur radio in 2008.  PARP is currently in its 5th season and I’m looking forward to many more. 

When I was in the final stages of preparing for both my technician and general class exams, I used a set of flash cards from Flash and Pass.  I would ask my wife to read the questions to me and I would try to answer.  This was especially handy when I wasn’t near a computer and couldn’t take the online sample tests.  This process actually worked well for me and helped me polish my knowledge.

In the summer of 2010 when the new US Technician question pool became active, I decided I would create an audio only version of the flash card process.   I used the ARRL version of the study guide and the question pool which accompanies that book to record the question, the four possible answers, followed by the question again and then finally announce the correct answer. 

I believe the basis for success in using this method depends on first reading the study guide.  Second, the use of online sample test sites (many different ones are available), I recommend a site some friends of mine maintain called Ham Tests.  However, I really believe it is important for the student to READ THE BOOK!!!  Then (and only then) download my twenty audio sessions.

Each audio session is anywhere from 12 to 30 minutes in length (perfect for commute to work or school) and contain every question in the current question pool unless that question relates to a visual diagram.  The tech and general pools do have some questions that ask you to reference a diagram.  I mention these during the appropriate audio session only as a reminder to study the question directly from the book.

As of today, I have the Become A Ham US Technician (2010 – 2014) and US General (2011 – 2015) sessions available.  These sessions are available free of charge.  I will record the US Extra (2012 – 2016) audio sessions sometime late Spring or early summer to coincide with the new extra class question pool which starts 1 July 2012. 

You can download/stream these audio sessions direct from MyAmateurRadio.com by clicking on the Become A Ham tab.  Alternatively, you can also download these sessions via RSS.  The RSS links to the Become A Ham US Tech and US General can be found on MyAmateurRadio.com on the Become A Ham tab. 

I’ve received many positive comments on both the technician and general audio programs and I’m truly pleased to know many have experienced benefit from the audio programs.  If you are preparing for either the US Technician or the US General amateur radio exam, please visit MyAmateurRadio.com.  Good Luck!!!

Until next time…

73 de KD0BIK

Even with losing one hour this weekend due to the daylight saving time change, I’m pleased to report that after three weekends and an estimated 20-24 hours of labor, the walls are complete.   As I reported last week, I only had about 5 sheets of drywall to hang this weekend.  Unfortunately, these 5 sheets were in the laundry area of the basement and included a lot more intricate and fiddly work.  I also decided to replace the laundry dryer vent which took about an hour and two trips to the hardware store.   The old vent pipe was crushed and had been taped and spliced together before we purchased the QTH in 2004.   While we all know duct tape and bailing wire are near permanent repairs, I went ahead and erred on the side of better judgment and replaced it all. 

I also had to accommodate a small design plan my wife had suggested.  This included a short divider wall next to the washer and dryer.  The laundry area of the basement was one area my wife and I had changed our minds on the overall design.  Initially we had planned to completely enclose the washer and dryer behind doors.   Today our washer and dryer are a basic set of Sears Kenmore models.  We are planning to upgrade to some nice front load models.  I figure if we’re going to spend the extra money for these upgraded models, we don’t want them hiding behind a door. 

Here are a few pictures from the work this weekend.  Please excuse the mess, the area is under construction. 

Here’s the short wall which was a last minute addition. 

Looking from my ham shack down the short hall to the laundry area.  The door on the left is access into the utility closet where the furnaces, hot water heater etc. are located.

The next few pictures (a few I’ve shown in older blog postings) are in my ham shack area and show the progression over the past few weekends.

The stud walls

Just two more panels to close in the corner.

Corner done. 

The above corner had to be framed in this way due to a basement support post.  While it takes up a little extra space, it should be fine.  Above desk cabinets, below desk cabinets and a nice wide work surface and all will be fine.   I’ve also been getting the electrical outlets wired in.  Once electrical is done I’ll wire in the CATV and network (voice/data) jacks. 

So what’s next on the agenda?  After three weekends of hanging drywall, my wife and I need a break.  Plus I need to reposition one AC/Heating vent in preparation for the ceiling drywall work.  This will also be a good time to move some of the scrap drywall pieces from the basement upstairs to the garage and just tidy the construction zone up a bit. 

The weather forecast for this upcoming weekend is supposed to be warm and I think we’ll tackle a few quick outdoor projects.  While snow is still very much likely in the mile high city, signs of Spring are popping up right and left.   It’s time to get the flowerbeds cleaned, rake up the winter kill grass and drag the water hoses out. 

If all goes as planned, I’ll be ready to rent the drywall lift and start on the ceiling the weekend of 24/25 March.  Once all the drywall is installed, then we’ll start the messy phase of taping, mudding and sanding.  This phase could begin as early as the last weekend in March.  But I don’t want to jinx myself, so I’ll just say it will get done when it gets done.

In closing, you’ll likely not hear from me on this particular subject again until the ceiling is complete.  I won’t bore you with an update next weekend on my progress of sheet metal duct work. 

Until next time…

73 de KDØBIK

Like so many of my fellow amateurs, I ordered the new Elecraft KX3 within minutes of the order form going active on the Elecraft website.  Like so many of my fellow amateurs, I also wait anxiously for word that the new KX3 is shipping.  Finally, like so many of my fellow amateurs, I also look forward to seeing my credit card has been charged as that will signal the end is near.  The end of the wait that is.

Back in late December, the hope was the new KX3 would begin shipping in late February.  Even with the extra day added to the calendar, the month of February expired and no KX3’s are shipping.  It is now Friday, 9 March and the latest shipping status as displayed on the Elecraft website states “KX3 shipments are estimated to begin Mid-March, between the 16th and 26th”. 

While the excitement and anticipation is certainly very high for those who are chiseling their marks in stone waiting for that package to arrive on their doorstep, the level of patience is also just as high.  There is a certain calm which proves amateur radio operators are a professional and respectable group of individuals.  There is an understanding that each and ever delay experienced will just simply make a better and more reliable product in the end.  I doubt we would see this same level of calm and respect in the iWhatever community.

I’m really writing this blog article in response to a few emails I’ve seen on the Elecraft Yahoo Groups reflector.  The subject of cases and bags suitable for protecting our beautiful investment has been mentioned several times over the past few weeks.  Wayne Burdick with the Elecraft company has suggested the LowePro Edit 140 camera bag.  He stated in an email to the Yahoo reflector that he owns this bag and uses it to protect his KX3.  Many other members and anxious hams have ordered this bag for their soon to be KX3.

Just like everyone else, I want a bag of some sort to protect my new KX3 but I just don’t like the look of the LowePro Edit 140.  It looks like it might be a bit on the bulky side and if it were just going in the back of the SUV it would be one thing.  But I want a multi-purpose bag that can go in the back of the SUV, in a carry own bag or in my backpack for SOTA activations. 

A few months ago I purchased the LowePro Apex 120aw camera bag after seeing it featured in a K0MOS Youtube video.  Like Matt, I currently own and use the Yaesu FT-817 for SOTA activations.  I wanted a bag of some sort to protect my 817 while inside my backpack.  I ordered the LowePro Apex 120aw and it works beautifully for the 817. 

The LowePro Apex with my 817 and accessories protected inside.

A view inside showing the Yaesu FT-817, Yaesu microphone, Buddipole 4S4P battery pack, Doc Watson meter and power cables.

While I’ve watched every video I can find of the KX3, it is hard to judge size until you can actually hold it in your hand.  Like everyone else, I also want to be ready for the day the KX3 arrives.  Having a bag suitable to protect it if scheduling could allow for a SOTA activation is important.  But like I said  the LowePro Edit 140 looks bulky.  In my mind, bulk equals weight and extra weight makes my back hurt. 

But how do I know if my new Elecraft KX3 will fit inside my current LowePro Apex bag.  I could measure…but how fun is that?  Now if I’m reading the KX3 manual which was released just last week correctly, the KX3 measurements are 3.5 x 7.4 x 1.6 inches.  If I just had something of those measurements to test with I would know for sure. 

Now it wasn’t until I walked into the unfinished portion of my basement which I’ve been working on the past few weekends.  You can read blog postings here about my progress along with pictures.  Anyway, I had failed to clean up my mess after working for about an hour last night and just nearly tripped over my KX3….huh I mean the block of wood that is the same size of my KX3. 

As we all know, a 2 x 4 is not actually 2 inches by 4 inches.  The exact measurements are roughly 3.5 inches by 1.5 inches.  Hmmmm, that is pretty darn close to what the KX3 manual states for the KX3 dimensions.     I picked up the block of wood I had kicked away and measured the length.  It was 7.5 inches.   But would it fit in my bag?  Perhaps another way to ask this, if it fits…will it zip?

The KD0BIK KX3 prototype.  I sure hope my real KX3 receives better than this block of wood. 

Yep…it zips.  It’s a nice fit and still room for the large battery pack and other accessories.

Of course there is a fundamental design difference between the Elecraft KX3 and the Yaesu FT-817.  The control buttons and knobs and that super large display of the KX3 is a not factored into my 2×4 KX3 prototype.  However, if you review the above picture (the inside view) I will still have room and these will be protected.  I will probably slip the KX3 into a felt bag just for extra protection.  Where’s that Crown Royal bag I’ve been hanging onto?

Now please don’t rush out and purchase the LowePro Apex 120aw bag just because my 2×4 fits and zips.  I’ll make certain to create a new blog posting once my KX3 arrives and I have a chance to model it with the bag.  But if you already own this bag, it might just work out for you with the KX3.

Well this blog post and trying out my KX3 block of wood has been fun.  I now must get back to work. 

Until next time…

73 de KD0BIK

You may remember back in September, I blogged about the news of the developer (Simon) of Ham Radio Deluxe selling to several US hams.  I followed one of the threads over on the QRZ forums until I basically grew bored of the hate and non-sense being discussed.  At that time (Sept. timeframe) no one really knew what was going to happen or when we would learn the fate and future of the HRD software.  While many had conjured up ideas of users receiving cease and desist letters, as I stated then (and what has been proven since) I didn’t think anyone had anything to worry about.

As the old year (2011) turned into the new year (2012) news began to surface about the plans for Ham Radio Deluxe.  The new owners (Rick Ruhl, W4PC Mike Carper, WA9PIE and Randy Gawtry K0CBH have since released two free updates (version 5.1 and 5.11) and offered users a $59.95 support plan which covers version 5.11 and version 6 at no cost.  Ham Radio Deluxe version 6 is scheduled to be available around the Dayton Hamvention timeframe of this year. 

I learned about HRD before I even earned my license and was using it with my Yaesu FT-897 as I tuned around the bands listening.  Once I got my ticket I used it to log my first HF QSO’s on 10 meters and have used it since.  The value of what Ham Radio Deluxe brings to me in the enjoyment of the hobby is certainly more than I can associate a cost to.  I’ve looked into alternatives for casual QSO logging, rig control and the digital modes and have found nothing that even comes close to beating HRD in its present form.

After watching the video below, I’m actually excited about the opportunity for HRD version 6 and beyond.  Some of the new features discussed will be an integration between N1MM logger and DM780.  This to me will be worth the investment to upgrade to version 6.     I do love N1MM logger for contest operations, but I rarely use anything other than DM780 for digital modes.  When I try to use other applications for PSK or RTTY, I’m like a fish out of water.  For that reason I don’t do a lot of true digital contest operations. 

If you haven’t already, please take about 52 minutes of your time and watch the video below which is made available by Gary Pearce, KN4AQ and his Amateur Radio Video News (ARVN) service. 

Watch this video on YouTube.

I’ve had no contact with any of the three mentioned owners and simply blog about this particular subject because I want to.  The opinions expressed are simply my own.  I fully understand and appreciate that not everyone will share my thoughts and opinions on this subject. 

Until next time…

73 de KDØBIK

If you’ve been following my ham shack updates from the past couple of weeks, you know I’m in the final stages of finishing the space in my basement which will be used as my ham shack, podcast studio, home office and overall man-cave.  The space is really starting to come together and I can see what the finished space will look like.  I’m truly excited and especially so after staring at nothing but stud walls for several years.

If you go back to this blog post and also read this one, you’ll get an idea of how I’ve spent the past couple of weekends.  While I believe we made great progress this weekend, we did fall short of my goal of getting all the walls done.   This delay was due to the extra time it took me to hang two doors.  These two doors will access the utility closet I framed in to hide the HVAC systems.  Because of the way the two furnaces are situated, I had to include two doors.  Otherwise, should anything happen to the hot water heater, it would have required demolition to remove it. 

The remaining work on the walls (about 5 more sheets of drywall) should get completed this coming weekend.  I then plan to take a weekend off and reward myself (and my wife) with doing something else that weekend and then it will be time to start hanging drywall on the ceiling.

Finally, I worked a total of about two hours in the ARRL DX phone contest this past weekend.  During this time I worked about 20 DX stations, adding four new to my growing DXCC list.  The four new DXCC entities worked this weekend were Bahamas, Barbados, Trinidad & Tobago and Portugal.  This brings me to a total of 54 DX entities worked to date.  

Sorry no pictures with this update.  I’ll hopefully get some pics in the next update or two showing progress.

Until then…

73 de KDØBIK

Just as I did last month, I want to briefly provide an update on my 2012 Challenge.  My 2012 challenge is a QSO a day for each day in the calendar year.  I’m officially two months in and still successful. 

I wouldn’t say this is proving to be a difficult project.  But I do have a lot going on both in the hobby of amateur radio and outside.  As I’ve recently discussed in my blog, I’m kicking the new basement ham shack, podcast studio, home office and just general man-cave project into high gear.  After working for 8 hours hanging sheetrock, I really just want to crash…but I also want to get that contact in.  In one example, the contact was a new DX entity of Canary Island.  So I suppose it was very much worth it and I’ve gotta admit the excitement caused the aching bones to feel better.   

My QSO count for the month of February was significantly lower than in January by almost half.  While I chased a few special event stations, I didn’t do any contesting during the month and that shows in my totals.  But of course the 2012 challenge is a QSO a Day.

The breakdown is as follows: 

Additional notes of interest:

DX Stations Worked – 3

New DX Entities – 1

Total QSO’s for 2012 – 316

Total consecutive QSO days – 60

Days left in 2012 – 306

Until next time…

73 de KD0BIK