AmateurRadio.com

About two years ago I ordered a QRP Wattmeter kit from Oak Hills Research (OHR).  The kit contained everything I would need to complete the project and in a few hours over the course of about 2 days I had it fully assembled, tested and working.  Prior to this kit, I hadn’t done this kind of work since high school. 

I was actually very fortunate that while in high school, my band director Mr. Crawford NB5I put together a basic electronics and computer class.  I’m thinking this was either in my sophomore or junior year (1983-84).  This was in the timeframe when I was really interested ham radio and my off and on again attempts at learning CW.  The class was a welcome change to the reading, writing and arithmetic classes which I’ll admit did bore me.  It was really my intention to take this electronics class to help better assist me in learning all that a novice class amateur would need to know back then. I remember two things about this class.  One, I built a cool 12v power supply.  We had to design the project, etch the circuit boards, solder in all the parts and for it to work.  Mine did.  The second thing I remember about that class was burning the snot out of my first two fingers and thumb from accidentally grabbing the soldering iron at the wrong end.  Thank you Mr. Crawford for teaching this class.

Now skip forward some 25+ years, I had a ball putting that QRP wattmeter together and to find that it worked in the end with no burns on my fingers was all I needed.  I had been bitten by the bug.  I ordered a few additional kits from OHR.  These were two 10w dummy loads and one 100w dummy load.  The 10w models are pictured just sitting on top of the 100w dummy load.  These 10w models are great for the QRP rig. 

I’ll admit I started the 100w model about a year ago.  I managed to get ten of the twenty resistors soldered onto the board and life got busy and I moved it to the side of my workbench.  I’ve looked over at it several times and even grabbed the soldering iron a few times only to put it back with either no time or no interest to complete it.

Now that I have extra under my belt, I thought it was about time to get some of these half completed projects moved from the workbench.  This 100w dummy load only needs about a half hour more work and today was a good day to do it.  I fired up the soldering iron and soldered the remaining ten 1K Ohm resistors onto the board.  (shown below)

The next step was to test to make sure all the resistors were secure and see how close to 50 Ohms I would be.  I call 50.6 close enough for me. 

Now to mount the board into the chassis and complete the solder work to the SO-239 connector and chassis ground. 

Mount the top and secure the four rubber feet and we can call this one good. 

This is an air cooled unit.  The documentation states 100w continuous with high loads possible for shorter durations.  Considering 100w is as much power as I have, this will do fine.  I connected it to my FT-897.  Yep…it worked and did exactly what it should.  I tested up to 100w and the resistors heated up slightly with a 30 second transmit cycle. 

Both the 100w and the two 10w dummy loads were fun to build.  Today I ordered a nixie tube clock kit and it should arrive in the next week or two.  Tomorrow I’m checking out a new amateur radio club I’m considering joining.  So stay tuned…lots to blog about.

Until next time…

73 de KD0BIK

For those who have followed my adventure over the past couple of weeks through this blog post and especially this one.  The wait is over…the FCC has fully approved, granted and the ULS database shows KD0BIK as an Amateur Extra. 

I won’t say this wait has been easy, but at the same time I won’t say I was ever worried I would be denied the license upgrade.  I knew I had done nothing wrong to end up on any sort of list and knew once someone manually reviewed my application against the information the FCC was watching for, all would be sorted out.  Which actually was exactly what happened in the end with the help of the ARRL.

As with life, the things that don’t kill or injure us….do make us stronger.  I have a much, much better understanding of not only the FCC ULS system, but also the ARRL/VEC process and will turn this negative into a positive and share what I’ve learned with others on an upcoming episode of the Practical Amateur Radio Podcast. 

Finally, I really can’t say enough great things about the ARRL.  The information they shared with me in the form of knowledge about this entire process and their reaching out to the FCC on two different occasions mean so much to me.  I hope I never need to seek their assistance again in a matter like this.  But I know they are there, not only for me…but for all licensed amateurs in the US. 

OK…well 20m sounds like it might be hot today.  I just worked a VK on JT65.  Let’s see what other wonderful DX I can round up.

Oh…and one more thing.  My paperwork to become a VE will be emailed to the ARRL later today.  I look forward to serving along side the other many fine VE’s and give back to the hobby of amateur radio. 

Until next time,

73,
Jerry  KD0BIK/AE 

Several amateur radio bloggers have already blogged about this news and the forum thread over at QRZ as all but gone viral.  I realize I’m late to the party, but until today, until this very hour I was of two minds if I would blog about this news.  I’m really not the type of person (and blogger) who wants to report the news.  I say this because 1. it’s already been reported and B. I’m really not sure I want my blog to be about that. 

I made this decision regarding my amateur radio podcast as well.  Meaning, I didn’t want to report the news.  In the example of the podcast, there are already very good amateur radio news based podcasts available.  The goal for my podcast was simple.  I wanted the content and the knowledge shared to be relevant not only at the time of release, but also very much so a year from now, two years from now and beyond.  I’m very much humbled when I receive an email from a new listener who informs me  they have just discovered my podcast and they are in the process of listening to all the previous episodes.  By the way, the Practical Amateur Radio Podcast is up to episode 46 and is in its fourth season. 

Regarding blogging, I just simply don’t have the time to stay current on all the amateur radio news.  Also, like with podcasting….there’s already a lot of “current news” type of blogs out there.  Since I try to mix in both my own personal amateur radio activities along with educational content, I would like to keep my blog posts as valuable a year or two from now as they might be to someone today.

I discovered Ham Radio Deluxe back in the late summer, early fall timeframe of 2007.  I had just earned my ticket and a colleague of mine had been using it for a few months and said you gotta get this software.  It does all this really cool rig control and has digital mode software for PSK and RTTY built in.  He told me about the logbook features and then said….it’s Free!  I hadn’t been a ham very long, but it didn’t take a lot of time to learn the value of it’s Free!

I downloaded and installed the software and got my Yaesu FT-897D connected without any issues.  It was this software which I used to log my very first ham radio contact into as well as what I used for those incredible digital modes like PSK-31.  I seem to remember many software updates were made available and each time things always seemed to get better and better.

The upgrade to version 5 (the current version) came with much improved functionality around the logbook and a few other bells and whistles that I currently don’t use.  Starting sometime in 2008, I would make the occasional donation to the developer of HRD.  While I don’t have the exact dollar amount etched into my memory, I would say between 2008 and present time I’ve done my share to help support the software. 

I’ll be honest and state for the record, that I’ve only tried and/or researched a few other types of rig control software.  I do use other logging software titles for specific contests and then import the contacts afterwards into my HRD logbook.  But when I’ve looked into other full-function types of products they either didn’t do everything I was accustomed to from HRD or were priced a little higher than I wanted to spend.  It’s not that I’m against paying for software, but when I did a “nuts to bolts” comparison…I simply couldn’t justify replacing Ham Radio Deluxe. 

I learned of the news about HRD from the QRZ forums on 12 September.  I’ve been visiting QRZ a lot in recent weeks checking on my extra upgrade.  I use the FCC link in my QRZ callsign record to quickly view the ULS record.  Yes, it still hasn’t been approved.  Anyway, while visiting QRZ I will read some of the news items on the main page.  I dare not go any deeper into the depths of the QRZ forums for risk of being pulled into the dark side.  Ha ha  But for the most part the news items are safe as long as you view them while the news is fresh.  Otherwise, you might read a lot of negativity as our fellow hams begin to comment on what ever the news item is about.

Basically what caught my eye in that article was the subject line which stated “Development to continue on HRD”.  Initial thoughts were “that’s cool” as I hadn’t seen an update since early 2011 timeframe.  I drilled into the thread to learn while development would continue on HRD, it would be done by different individuals and that Simon had sold the rights to HRD to those individuals.  At this time the thread only had about 3 pages of comments.  Today I believe there are over 10 pages.

What we know at the present time is more of less what is covered in the first few pages of the thread.  Ham Radio Deluxe was sold and it will continue to be developed and supported.  The rest really is speculation and the only thing I’ll say is I’m under the impression (since a financial transaction of an undetermined amount took place) Ham Radio Deluxe will shift from a donationware model to a payware model.  But this really is only my impression.

As I said, there’s a lot of emotion taking place in the QRZ thread and I’m only to assume that this emotion is being played out in other ham radio forums.  Like many, I’m somewhat sad to see this happening….but I also enter it with a degree of optimism.  First the sad feeling.  I’m sad from the standpoint that something I always appreciated viewing on the HRD website was the following statement “Keep Amateur Radio Free”.  This spirit is what makes the hobby so special.  The free-flow of knowledge shared from one to another is exactly the character of amateur radio.  While we can’t expect everything in amateur radio to be free, when someone has a talent and develops something like HRD, it truly is a gift to the hobby.  This is exactly the same and shares the same value (in my opinion) as someone who shares their knowledge with others in the form of Elmering or someone who donates their time to become a VE. 

My optimism?  Well, since HRD is already a product which I know and use, I’m optimistic the continued development will not only match, but surpass the standard of quality we have come to know of Ham Radio Deluxe.  While it might be hard to imagine HRD getting any better than it is now, I’m sure there are many enhancements that could be made to an already great product to truly make it better.

Donationware versus payware?  As I have stated, I donated what I believed was a fair amount over the course of the last 3-4 years.  How much I donated is between me and my conscience, and of course what I perceive is both the value of the product and all the enhancements made since I’ve been using it.  While I believe I’ve contributed enough to cover what currently is HRD, I’ll certainly evaluate any future enhancements the new owners make and balance that to what HRD is as of today.  I may feel any new enhancements made is something I can or can’t live without. 

While it has been discussed once or twice (and with a lot of passion) in those ten pages over at QRZ, I doubt the new owners will issue any sort of cease and desist order to either pay for the new HRD or stop using the old.  While I work in the software and hard industry, I’m not an attorney, I don’t play one on TV and I also didn’t sleep in a Holiday Inn Express last night, So I can’t and won’t pretend to know what I’m talking about.  But I certainly can’t see where the new owners will have any ground to stand on in attempting that maneuver when HRD has been and was certainly always intended to be free as the current version stands today.

I would just like to close by saying a sincere THANK YOU to Simon Brown and all the many individuals who donated their time and efforts and made available a wonderful product.  If you haven’t tried Ham Radio Deluxe, I certainly recommend it.  For now, the HRD website is operational and the current version 5 is available for download.   Also, at present time the link still takes you to Simon’s website where the download is 100% free.  As you might expect in a few days, a few weeks, next month…certainly sometime in the near future the URL may redirect to another website where you’ll find HRD is now payware. 

Until next time,

73 de KD0BIK

Another episode of the Practical Amateur Radio Podcast is available for streaming or download.  In episode 46 I discuss the JT65 mode and JT65-HF software.  In addition, I introduce listeners to the new Elmer Connection on the MyAmateurRadio.com website and share my good news on the extra upgrade and discuss plans of becoming a volunteer examiner (VE) to further give back to the hobby. 

Please look for the Practical Amateur Radio Podcast in iTunes or direct from MyAmateurRadio.com.  Have an iPhone or other smart phone?  You can also stream direct from my mobile page.  I hope you’ll listen.

73,
Jerry KD0BIK

There have been events in history where individuals will always remember where they were, who they were with and what they were doing when the event happened.  For the generation of my grandparents, that day was December 7, 1941 when Pearl Harbor was attacked.  For the generation of my parents, that day was November 22, 1963 when President John F. Kennedy was assassinated in Dallas, Texas.  As I watched the Space Shuttle Challenger disaster unfold on January 28, 1986 I was certain this would be the day which I would clearly remember for the rest of my life and certainly hoped none other would ever prove to be greater.  After all, I was only 19 years old, in my first year of college and grew up in small town Texas.  By the way, I still do remember very much what I was doing, who I was with and where I was on that tragic day.

Tuesday, September 11, 2001 began just like every other day for me.  I woke up early (around 6 AM MT) I had showered, dressed and was downstairs drinking a cup of coffee and watching Fox News by 6:20 AM.  This was pretty much a morning ritual for me.  Because my commute was less than five minutes, I typically wouldn’t leave my apartment until around 6:45 or so.  On this day, I wasn’t in that big of a hurry.  I had been working long hours as I was planning to fly to London later that week.  It was shaping up to be a beautiful day in the mile high city and from what I could see while watching Fox News, New York City was also looking beautiful.

My apartment was relatively small.  From my kitchen I could hear the TV in the living room and heard the initial report of a plane hitting the World Trade Center.  The time was 6:46 AM MT (8:46 AM ET).  I stepped into the living room and watched/listened for updated news.  Initial reports was it was a small airplane (perhaps a sightseeing plane) which hit the WTC.  The Fox anchors talked about how clear the sky was overhead in NYC.  Thoughts of perhaps the pilot suffered a heart attack or aircraft malfunction were more or less what most believed had happened. 

As the time approached the top of the hour, I was really intrigued in what had happened.  I remember at the top of the hour Fox and Friends passed it off to Jon Scott who happens to be a pilot.  Again for several minutes the speculation into what had happened to the pilot or to the airplane was the topic of discussion.  Fox had switched to an anchor outside the studios and I was just about ready to turn the TV off and drive to the office.  Again, it looked like an accident and I would follow up with what happened once I got to the office.

As I was reaching for the remote, what I saw next on TV will forever be in my memory.  It was 7:03 AM MT (9:03 AM ET) when the outside live shot showed a second plane flying into the second tower of the World Trade Center. It became clear to me and to the entire nation that we were under attack.  Yes, one aircraft could accidentally hit the WTC, but two?  Absolutely not. It was also very clear the second plane was not a small sightseeing plane, but a large airliner. For the next 15 minutes or so I sat on the edge of my sofa watching the events unfold in New York City.  I (and certainly like many Americans) was in total dis-belief at what I had just watched happen. 

Part of my job responsibilities (both then and now) was/is to manage our business continuity and disaster recovery processes for the customer support organization at my company.  While we (at the time) didn’t have an office in the NYC area, I wanted to get into my office so that I could be prepared for what ever else might happen on this day.  At this time, only the two WTC towers had been attacked.  I was not aware there were two other planes.

I quickly drove to the office and of course most everyone had already heard about the attacks in NYC.  I’m asked by a colleague if I had heard of the events and said yes, I had watched the information regarding New York.  He said, but have you heard about Washington DC?  It soon became very clear this was not just an attack on New York and the World Trade Center.  This was much, much larger.

Internet access from the office became really slow with employees checking the various news sites, emailing friends and family.  We had small TV’s in the lobby of the building connected to a DirecTV feed and I went down to try to get more information.  I was not only concerned about what other attacks might be planned, but also on the WTC attack which I had watched earlier from my apartment.  I wanted to see what progress had been made on extinguishing the fires and of course get updates on the rescue efforts. 

I made it downstairs to one of the TV’s.  Smoke was still pouring from the top of both towers, within seconds  the south tower began to collapse. I honestly couldn’t believe what I was watching.  It wasn’t long after the south tower collapsed that we heard word of United Flight 93 crashing near Shanksville, PA.  I had already went back upstairs to make a few phone calls.  I remember hearing some employees talking about the north tower collapse.  Again…I just couldn’t believe it. 

At some point in the day, an announcement was made or perhaps there was a company email.  But what ever the delivery mechanism, the message was to let us all know that all employees had been accounted for.  I doubt very seriously if much work got done that day.  As I said, I was scheduled to fly to London in a few days.  After hearing about all flights being grounded for possibly a few days, I spoke to my boss and determined I would not be traveling as scheduled. 

I remember going home and making myself a fairly stiff drink.  Sometime around 9 PM I went out to the hot tub.  It was a cool evening and I remember looking up in the sky and seeing and hearing nothing.  This was odd as I lived near the flight path for Centennial Airport (KAPA) and Denver International (KDEN) is only about 25-30 miles and at just about any time of the day and evening you can see the planes coming in for landings and departing.  I do recall hearing a few jet fighters and seeing various types of military aircraft.  I’m sure this was the case over most every major metropolitan city. 

Like many Americans, I did a lot of praying and in doing so asked God a lot of questions.  I have tried to pray for peace each and every day since the attacks and pray for the those who are making sacrifices and sometimes the ultimate sacrifice to ensure our freedoms both at home and abroad. 

In 2005 through the course of two acquisitions, Oracle acquired Peoplesoft who had acquired JD Edwards in 2003.  On the four year anniversary of 9/11 I learned something I didn’t know previous.  While JD Edwards didn’t lose any employees in the attacks, Oracle had lost eight employees that day.  Most will know the name of one employee in particular.  This employee, along with many other brave individuals fought back in what possibly should be considered the first battle won over terrorism and that employee was Todd Beamer.  Todd and many other brave individuals fought back on United Flight 93.  While they gave their life, they did it so many others could live.  Of course we now suspect that Flight 93 was headed for the US Capitol Building or the White House. 

In 2007 I realized a childhood dream to get my amateur radio license.  I remembered the speech which President George W. Bush made in January 2002 when he announced the creation of the USA Freedom Corps.  During that State of the Union address, President Bush asked Americans to serve a cause greater than themselves.  I answered that call by joining the Denver Police Depts. Volunteers in Policing Unit and DAREC, Denver Amateur Radio Emergency Communications.  In the course of just 3 years I had volunteered over 250 hours in that program. 

Yes it is easy to say “I’ll never forget”.  Through illness or old age there may come a time when I just don’t remember.  But for now, I will remember and each year on September 11th (as I have done for the past 9 years), I’ll wake up early and I’ll go downstairs, make a cup of coffee, turn on the TV (yes Fox News Channel) and I’ll say a little prayer and prepare myself to watch, to remember and even cry a little. I hope all American’s will remember, I hope all American’s will pray and I hope all American’s will cry a little. 

Thank you for reading and for allowing me to cross post this across my different blogs.

God Bless the United States of America.

Jerry

Before I get started with the updated news on what is happening with my extra class upgrade application with the FCC, I want to say a very special thank you to the ARRL and to Perry Green, WY1O who just contacted me via email.

I’ve blogged about and mentioned the value on my podcast I believe we as amateur radio operators receive from being members of the ARRL many times.  I must admit, this value was only something I had heard others mention or read directly through the efforts of the ARRL to identify why hams should join the league.  I personally had not (until now) been on the receiving end of any direct assistance from the ARRL.  Of course, I believe this is normal.  After all, we purchase insurance based on what a company tells us they can and will do and frequently never actually see or need the benefit.  But we know and trust it is there when needed.

I can tell you from first hand experience, the ARRL benefit we all receive through membership is very much worth the cost.  Within 24 hours of my initial email to the ARRL Regulatory and Advocacy group I had received a response.  Not just any response, but a response very much worthy of answering my questions, explaining what it all meant and informing me they had contacted the FCC on my behalf.  WOW…

Now to the update.  The questions I asked of the ARRL Regulatory and Advocacy group was along the lines of what did “alert list review” mean, why was I on this list and what can be done to move my application along to a full approval status.  All my questions (and more) were answered. 

First what does “Alert List Review” mean?  As provided on the FCC’s website, by definition an “Alert List Review” is:

A list maintained by the FCC staff that identifies potential categories of "problem" applications so that ULS can identify them and send them offline for manual processing. The alert list function can then be used to flag applications based on the identity of the applicant, the spectrum being applied for, or the type of license being sought. For example, if an application is received for spectrum that is the subject of an ongoing rulemaking proceeding, that application would be offlined by ULS. The staff would then need to override a system alert in order to grant the application.

Now to the “why am I on this list" question and this is really where the ARRL helped me.  The ARRL contacted the FCC on my behalf and was able to determine I was off-lined for additional research as there is another individual with a variation of my name who they needed to hold, or hold for research. 

Mr. Green went on to inform me that I was fully cleared and would have been “released” and granted sooner, if it were not for the person who manually handles this review process wasn’t on vacation.  Some may think “why is this all down to one person”, well in my job I have a lot of responsibilities that simply don’t get done when I’m out sick or on vacation and it just simply is what it is. 

I also want to state for the record, the FCC never did say that I had done anything wrong.  This was simply my own “jumping to conclusions” in trying to figure out what all this meant and what was going on.  I have absolutely no reason to believe (nor do I believe) I was singled out for any reason whatsoever, other than the simple fact my name is similar to another name which needs to be handled in a different manner. 

Finally, I fully agree with the processes and procedures the FCC has in place.  My only regret in all this was I wished I had just simply contacted the ARRL versus reading into the information given to me through various social media and the additional forum research I conducted.  This put me more on the defensive and really didn’t do anything to resolve the problem and answer my questions. 

In closing, yes we do live in the information age.  We expect almost immediate results and when something doesn’t follow an expected path we do tend to question things.  However, I’m reminded of the fact that those who received their license long ago simply didn’t enjoy the short amount of time between testing and actually getting on the air as we do today.  Brand new technician class hams can leave a VE session on a Saturday and in most cases may be able to get on the air the very next weekend.  We should better appreciate this fact and be thankful to those who work hard to make all this happen.

Until next time….

73 de KD0BIK/AE

As I proudly blogged about on 28 August, I did successfully pass my first attempt at the US extra exam and walked out of the VE session with my signed CSCE in hand.  I started checking the FCC ULS database the following week.  I had certainly been given the impression from the local VE team that they send the results off and typically upgrades or new licenses are shown within just  few days.  True enough, I noticed the FCC had received the upgrade information on 1 September.  I will admit I burned a hole through cyberspace refreshing the browser several times on Friday, 2 September hoping I would see the approved status show.  However, that was not to be. 

Over the weekend I had a ball working the Colorado QSO party on Saturday and spent a few hours on Sunday and Monday on the air.  I knew with it being a long holiday weekend I would expect to see any movement until Tuesday, 6 September.  Unfortunately, Tuesday 6 September came and went and the same status was showing. 

I became somewhat curious and decided to look into the amount of time which it took the FCC to fully approve my technician to general upgrade in January 2008.  Based on the information in the ULS database, the FCC received the request and it went to approved status all in the same day with the license being mailed the following day.  Something seemed a bit odd as I couldn’t understand what would be causing the delay this time.

When I review the status on the FCC ULS database this is what I see.

09/01/2011  Modification Received
09/01/2011  Redlight Review Completed
09/01/2011  Offlined for Alert List Review

I decided to utilize social media and the many hams I follow on Google+ to see if anyone else had experienced this.  Within a short amount of time another ham responded and told me what the status of Offlined for Alert List Review means.  Basically it is the FCC equivalent of the FAA’s No Fly List.  They went on to say that my name in on the FCC’s list of people who should not be given a license.  WHAT????

Now if you know me, you know I’m a God fearing, law-abiding, tax paying, red blood American.   Since getting my technician class licensed, I successfully upgraded to general in Jan. 2008 (without issue) and have had a couple of background checks for my volunteering with the Denver Police Dept.  In addition, I had my passport renewed in the Spring of 2011 and successfully re-entered the country after visiting Belgium and England during the June/July 2011 timeframe.  So what does the FCC think I’ve done wrong?

Well…if I knew the answer to that question I probably wouldn’t be writing this blog post.  I figure this must just be a case of mistaken identity.  After all, the name Jerry Taylor is fairly common.  Perhaps another Jerry Taylor has some FCC complaints logged against them and the FCC just needs additional time to confirm that I’m not the same Jerry Taylor.  Or, perhaps the FCC is casting a bigger net and another Jerry Taylor has been flagged in another government database.  At this point, I really don’t know. 

So what have I done about this?  Well…I’ve decided at this time NOT to contact the FCC.  I would probably only be able to speak to an admin level type person who may or may not know anything about why my application is on hold.  Instead, I utilized my ARRL Life Membership and contacted the ARRL Regulatory and Advocacy group.  At least these are fellow hams who should have the knowledge and insight to work directly with the FCC to clear this up.  Unfortunately, I’ve not heard back from the ARRL as of yet.

I wouldn’t think it would be too difficult to determine the right Jerry Taylor from the wrong Jerry Taylor (if this is the case), but who knows.  I’ve not done anything wrong and can’t think of any reason why this would or could be happening.  I’ll keep you all posted as I learn more.

Until then….

73 de KD0BIK/AE