Author Archive
QRPTTF – 2015
April 26th, 2015 | 
Author: It seems for me at least, that these event hardly ever go as I envision them. In my mind, I get onsite early, with plenty of time to set up, which goes like a hot knife through butter. I have plenty of time to spend on the air, and just make scads of QSOs, then break down and come home, tired but triumphant.
As Mr. Lennon wrote, "Life is what happens when you're busy making other plans."
I had planned to get to Washington Rock State Park around Noon. The park, which is on the first ridge of the Watchung (Wach Unc in Lene Lanape) moutnains, meets the QRPTTF theme requirement for being a place somehow related to Native Americans. What actually happened was that my daughter was invited to a sleepover/birthday party, and I had to have her at her friend's house at 2:00 PM. So much for the early start.
Set up did go like the knife through hot butter, after I made it to the park. The new Joplin ARC antenna launcher got my antenna hoist line up over a 40 foot high tree branch on the first shot. The EARCHI was up, literally in minutes.
I got on the air at about 1830 UTC and I spent about 15 minutes calling CQ QRP on 15 Meters with no takers. I had a feeling that 15 Meters was going to be good today. It wasn't, at least for me. So I meandered over to 20 Meters and was answered by Craig N8KMY at 1855 for my first QRPTTF QSO.
It didn't start out as a QRPTTF QSO. He called me because in his words, he couldn't believe that I was QRP. He is located in northern MI and told me that I was one of the loudest signals on the band for him. He repeatedly asked me to confirm that I was only running 5 Watts.
He was as loud to me as I was to him, so that's where the fun began. First he lowered his power from 40 Watts to 20 Watts, when I told him there was no difference in his signal, he continued to lower his power down to 10 Watts, and then, eventually 5 Watts. He was astounded when I told him (quite honestly) that there was no difference between his signal at 40 Watts or 5 Watts. A new QRP convert? I certainly hope so! Craig seemed enthusiastic enough.
Getting him down to 5 Watts qualified as a QRPTTF contact. We had a nice ragchew for about 25 minutes. A bit longer than I had intended, but it's never a bad thing to promote QRP, and bring a new soul into the fold, right? So it was worth it.
Besides, as it turned out, the bands weren't exactly rip-roaring with QRPTTF activity. I ended up making only 8 QSOs. Six on 20 Meters and two on 40 Meters.
I worked, in addition to N8KMY, NK9G, WQ8RP, K7RE, K4UPG (Kelly, my fellow QRP Polar Bear - Grrrrrrrr), WB3T, KS8M and AA5TB.
What made the day, was when my fellow SPARC members, Marv K2VHW (my official QRPTTF 2015 photographer) and Drew W2OU came for a visit. They kept me company in between QSOs and also stayed with me until I packed up for the return trip home. Around 5:00 PM, it started getting chilly again and QRPTTF signals were becoming about as scarce as hen's teeth. So only though I put in only 2 & 1/2 hours behind the key, I decided to call it an event and head home.
The important thing was that I had fun and enjoyed my time playing radio today. It feels like I don't get to do this anywhere near enough.
72 de Larry W2LJ
QRP - When you care to send the very least!
As Mr. Lennon wrote, "Life is what happens when you're busy making other plans."
I had planned to get to Washington Rock State Park around Noon. The park, which is on the first ridge of the Watchung (Wach Unc in Lene Lanape) moutnains, meets the QRPTTF theme requirement for being a place somehow related to Native Americans. What actually happened was that my daughter was invited to a sleepover/birthday party, and I had to have her at her friend's house at 2:00 PM. So much for the early start.
Set up did go like the knife through hot butter, after I made it to the park. The new Joplin ARC antenna launcher got my antenna hoist line up over a 40 foot high tree branch on the first shot. The EARCHI was up, literally in minutes.
I got on the air at about 1830 UTC and I spent about 15 minutes calling CQ QRP on 15 Meters with no takers. I had a feeling that 15 Meters was going to be good today. It wasn't, at least for me. So I meandered over to 20 Meters and was answered by Craig N8KMY at 1855 for my first QRPTTF QSO.
It didn't start out as a QRPTTF QSO. He called me because in his words, he couldn't believe that I was QRP. He is located in northern MI and told me that I was one of the loudest signals on the band for him. He repeatedly asked me to confirm that I was only running 5 Watts.
He was as loud to me as I was to him, so that's where the fun began. First he lowered his power from 40 Watts to 20 Watts, when I told him there was no difference in his signal, he continued to lower his power down to 10 Watts, and then, eventually 5 Watts. He was astounded when I told him (quite honestly) that there was no difference between his signal at 40 Watts or 5 Watts. A new QRP convert? I certainly hope so! Craig seemed enthusiastic enough.
Getting him down to 5 Watts qualified as a QRPTTF contact. We had a nice ragchew for about 25 minutes. A bit longer than I had intended, but it's never a bad thing to promote QRP, and bring a new soul into the fold, right? So it was worth it.
Besides, as it turned out, the bands weren't exactly rip-roaring with QRPTTF activity. I ended up making only 8 QSOs. Six on 20 Meters and two on 40 Meters.
I worked, in addition to N8KMY, NK9G, WQ8RP, K7RE, K4UPG (Kelly, my fellow QRP Polar Bear - Grrrrrrrr), WB3T, KS8M and AA5TB.
What made the day, was when my fellow SPARC members, Marv K2VHW (my official QRPTTF 2015 photographer) and Drew W2OU came for a visit. They kept me company in between QSOs and also stayed with me until I packed up for the return trip home. Around 5:00 PM, it started getting chilly again and QRPTTF signals were becoming about as scarce as hen's teeth. So only though I put in only 2 & 1/2 hours behind the key, I decided to call it an event and head home.
The important thing was that I had fun and enjoyed my time playing radio today. It feels like I don't get to do this anywhere near enough.
72 de Larry W2LJ
QRP - When you care to send the very least!
They named a candy after me!
You may recall in my post about the Rookie Roundup that I had mentioned I used my EARCHI antenna, anchored to my 31' Jackite pole as a support. I had intended to shoot a support line over a convenient tree and was going to haul it up that way.
I started pressurizing my Joplin ARC pneumatic antenna launcher, but I couldn't build up any pressure. At first, I thought that perhaps my super cheapie WalMart bicycle pump had failed me. But listening carefully while stepping on the foot pump revealed a "whooshing" sound - so air was coming out. Next, I thought that perhaps the Schrader valve on the launcher was busted. However, I manually manipulated the pin in the tip with a screwdriver tip and it came back after being depressed - so that was OK.
It was about then that Marv K2VHW said to me, "Larry, is that a big crack on the side?"
A HUGE crack on the side of the air pressure chamber, on the side opposite the valve - practically going down the entire side.
DUH!
That's when I remembered that last October, when I made my last outdoor QRP venture for the season to Washington Rock State Park, the launcher had slipped out of my hand as I was opening my Jeep door for the return trip home. It had hit the concrete parking lot surface pretty hard, but I didn't think twice about it at the time. I didn't even give it a second look at the time. PVC is strong stuff after all, right?
I didn't notice the humongous Godzilla sized crack until Marv had pointed it out.
Call me Captain Oblivious.
I was going to try epoxying the crack. But air is like electrons - no such thing as a dumb electron - no such thing as a dumb air molecule. If either can find the shortest path, they will. I figured that once the pressure chamber was compromised, it was compromised for good. Continually pumping air into it would probably only make the crack grow bigger, even after a patch job. So last Sunday night, I ordered another. This is not something I would have normally done - my Ham Radio budget is EXTREMELY tight this year. But that launcher has become necessary equipment. I'm not as talented a water bottle tosser as Jim W1PID, my arm is nothing that would scare Tom Seaver (even on my best day) and my sling shot skills are so-so to say the least. And don't even put me anywhere near archery equipment. Between the various outdoor QRP events and Field Day, that launcher has become a must have. So even though $50 is a big deal for me, the decision to order a replacement was a no-brainer.
I was thinking that there's no way it would arrive in time, but it showed up through the USPS on Wednesday. Talk about fast service - thanks Joplin ARC ! And how do you like that - the USPS delivered it to the right house! A lot of you are thinking that's no big deal, but there's a Clinton Place, a Clinton Terrace and a Clinton Avenue in South Plainfield. Sometimes my mail goes to other places, it can be a toss of the dice.
I built it Wednesday evening, after coming home from work and after typing up and sending out the local radio club's minutes for last month. The launcher is so easy to build that I could do it in my sleep - and in fact, I was so tired Wednesday night that it almost did get built while I was asleep.
I set it aside for a 24 hour cure, and pumped it up last night for a leak test. No bubbles in the water - yay! After pumping it up with 5 lbs of pressure, I did another check at 10 lbs of air pressure. Still no bubbles - double yay! Then a final test at 20 lbs of air pressure, as I rarely have to go above that to successfully launch an antenna. Good again - triple yay!
So I have a launcher for tomorrow - QRPTTF, and for the rest of forever. I am really going to be sure I never play dropsy with it again. The spud gun has become too valuable a tool for me to be without.
72 de Larry W2LJ
QRP - When you care to send the very least!
A lot better today!
I saw another e-mail in my inbox this morning from Marv K2VHW with the subject "Another flare". I groaned loudly, inwardly, because no one near me would have understood. Then, just before heading out to the Jeep at lunch time, I checked http://www.bandconditions.com/index.htm
That had me shaking my head even more.
I'm glad I didn't give in to the temptation to chuck it all for today, because I had the best QRP lunch time that I've had in a while - numbers and predictions be damned!
I started out on 17 Meters which seemed to be in great condition. Low noise level and some loud signals. I worked EA6NB, Jaime in the Balearic Islands. From there I wandered around a bit and worked W4B a Special Event Station for Earth Day in Florida.
After that, I switched bands and called CQ near the 20 Meter QRP Watering Hole and was answered by Dick K5TF in Atlanta, GA. Dick had a gorgeous signal. He was pushing 5 Watts out of his K2 to a Hexbeam (secretly, I am lusting for one of these babies. Bob W3BBO and I always dream about getting one for our stations and my good friend and fellow DXer/QRPer Steve WX2S is in the process of installing one). Not only was Dick's signal excellent, but his fist was a dream to copy. The words were appearing in my brain as if I were reading a teleprompter. It was a very enjoyable, but short chat.
From there, I decided to spend the last bit of time that I could squeeze out of lunch break by calling CQ at the 15 Meter QRP Watering Hole on 21.060 MHz. I was greeted there by Alberto WP4L for another 2X QRP chat. Alberto was pushing 5 Watts out of his Yeasu FT-450 and sounded like he was just down the street. And I might add, another excellent fist that was bliss to copy.
If the flare that Marv e-mailed me about helped provide the kind of band conditions that I experienced today, then I hope we get them all the time! Loud signals, quiet background noise - what more could you want or ask for? The only bad thing was having to stop so that I could come back inside in order to finish the work day out.
72 de Larry W2LJ
QRP - When you care to senf the very least!
That had me shaking my head even more.
I'm glad I didn't give in to the temptation to chuck it all for today, because I had the best QRP lunch time that I've had in a while - numbers and predictions be damned!
I started out on 17 Meters which seemed to be in great condition. Low noise level and some loud signals. I worked EA6NB, Jaime in the Balearic Islands. From there I wandered around a bit and worked W4B a Special Event Station for Earth Day in Florida.
After that, I switched bands and called CQ near the 20 Meter QRP Watering Hole and was answered by Dick K5TF in Atlanta, GA. Dick had a gorgeous signal. He was pushing 5 Watts out of his K2 to a Hexbeam (secretly, I am lusting for one of these babies. Bob W3BBO and I always dream about getting one for our stations and my good friend and fellow DXer/QRPer Steve WX2S is in the process of installing one). Not only was Dick's signal excellent, but his fist was a dream to copy. The words were appearing in my brain as if I were reading a teleprompter. It was a very enjoyable, but short chat.
From there, I decided to spend the last bit of time that I could squeeze out of lunch break by calling CQ at the 15 Meter QRP Watering Hole on 21.060 MHz. I was greeted there by Alberto WP4L for another 2X QRP chat. Alberto was pushing 5 Watts out of his Yeasu FT-450 and sounded like he was just down the street. And I might add, another excellent fist that was bliss to copy.
If the flare that Marv e-mailed me about helped provide the kind of band conditions that I experienced today, then I hope we get them all the time! Loud signals, quiet background noise - what more could you want or ask for? The only bad thing was having to stop so that I could come back inside in order to finish the work day out.
72 de Larry W2LJ
QRP - When you care to senf the very least!
Rookie Roundup
The South Plainfield Amateur Radio Club ran a station for the ARRL Rookie Roundup today. While we ourselves were ineligible to operate, we did put out an invitation to all the newly licensed Technicians from our Fall and Winter classes to come out and get their feet wet in HF. The idea, of course, was to show them that there's a whole other world out there in Amateur Radio beyond what they hear on VHF/UHF.
Club member Dave KD2FSI, who qualifies as a Rookie by time, volunteered to set up the station. I say Dave qualifies as a Rookie by time, because by the rules of the contest, he does - he was licensed less than three years ago. However, he is certainly not a Rookie by experience. He has already upgraded to General and is a very busy Ham, diving headfirst into many different facets of the hobby, portable operations being one of his favorite. I wish I could take credit for steering him in that direction, but Dave discovered that joy on his own, without my help.
We had agreed to meet at Putnam Park in town at Noon, in order to set up for the 2:00 PM start. By the time I got there, Dave already had things quite well in hand.
Marv K2VHW and Drew W2OU served with distinction in the coaching perspective. Marv is quite the instructor. He has a gift and a natural talent for teaching and was able to make our Rookies feel like Old Pros in no time.
Here's a picture of Marv explaining to Mario the ins and outs of making a SSB Contest QSO. Mario made his very first HF QSO today, and the process was amazing to watch. The first few QSOs were halting and tentative, but due to Marv's excellent guidance, Mario was having a blast within short order.
Within a short amount of time, our Rookies were able to handle QSO and logging chores while we stood in the background as control operators for NJ2SP.
The opportunity seemed golden. HF operating under portable ops conditions. With QRPTTF next weekend, how could I not bring the QRP gear along? It's always good to perform a test run, no?
I bungeed my 31' Jackite pole to a nearby post and set up the EARCHI antenna as a sloper.In between my stints as an HF coach, I went to town working stations on 20, 17, 15 and 10 Meters. A lot of the contacts were MM contest QSOs, but there was one ragchew in there, also. I worked
9A7R
ZW8T
OX3XR
CO8EH
WD4MSM - ragchew
KP2F
TM9B
EG8TRV - Special Event Station
HA8VK
Not bad for the time I had, in between helping with QSO procedures, serving as a helping set of ears, and talking with some of our other newly licensed Techs about equipment, making recommendations, etc.
The Rookies had a blast as well. 10 Meters was open to Texas and the West Coast and our newbies were amazed that "talking to a guy in Idaho" was as easy as talking to a guy on the local 2 Meter repeater - and that the guy in Idaho sounded better than the guy on the 2 Meter repeater!
In all it was a fun day. I'm not sure who had more fun - our new Techs in getting their feet wet in HF, or us veterans watching their fun and excitement. It was definitely rewarding, and I hope we pushed some people a little more deeper into this fine hobby.
72 de Larry W2LJ
QRP - When you care to send the very least!
Club member Dave KD2FSI, who qualifies as a Rookie by time, volunteered to set up the station. I say Dave qualifies as a Rookie by time, because by the rules of the contest, he does - he was licensed less than three years ago. However, he is certainly not a Rookie by experience. He has already upgraded to General and is a very busy Ham, diving headfirst into many different facets of the hobby, portable operations being one of his favorite. I wish I could take credit for steering him in that direction, but Dave discovered that joy on his own, without my help.
We had agreed to meet at Putnam Park in town at Noon, in order to set up for the 2:00 PM start. By the time I got there, Dave already had things quite well in hand.
Marv K2VHW and Drew W2OU served with distinction in the coaching perspective. Marv is quite the instructor. He has a gift and a natural talent for teaching and was able to make our Rookies feel like Old Pros in no time.
Here's a picture of Marv explaining to Mario the ins and outs of making a SSB Contest QSO. Mario made his very first HF QSO today, and the process was amazing to watch. The first few QSOs were halting and tentative, but due to Marv's excellent guidance, Mario was having a blast within short order.
Within a short amount of time, our Rookies were able to handle QSO and logging chores while we stood in the background as control operators for NJ2SP.
The opportunity seemed golden. HF operating under portable ops conditions. With QRPTTF next weekend, how could I not bring the QRP gear along? It's always good to perform a test run, no?
I bungeed my 31' Jackite pole to a nearby post and set up the EARCHI antenna as a sloper.In between my stints as an HF coach, I went to town working stations on 20, 17, 15 and 10 Meters. A lot of the contacts were MM contest QSOs, but there was one ragchew in there, also. I worked
9A7R
ZW8T
OX3XR
CO8EH
WD4MSM - ragchew
KP2F
TM9B
EG8TRV - Special Event Station
HA8VK
Not bad for the time I had, in between helping with QSO procedures, serving as a helping set of ears, and talking with some of our other newly licensed Techs about equipment, making recommendations, etc.
The Rookies had a blast as well. 10 Meters was open to Texas and the West Coast and our newbies were amazed that "talking to a guy in Idaho" was as easy as talking to a guy on the local 2 Meter repeater - and that the guy in Idaho sounded better than the guy on the 2 Meter repeater!
In all it was a fun day. I'm not sure who had more fun - our new Techs in getting their feet wet in HF, or us veterans watching their fun and excitement. It was definitely rewarding, and I hope we pushed some people a little more deeper into this fine hobby.
72 de Larry W2LJ
QRP - When you care to send the very least!
Capturing our spirit
I saw a link to this video on Peter VE3HG's blog.
The devil is in the details and some might complain that some of the details in this commercial are not paid attention to - no call signs for instance. And some of the concepts are a bit stretched - did he buy that amplifier himself? But the basics are sound, and I think this little boy, Sam, captures our Amateur Radio spirit to a "T". At least I think so. What do you think?
The devil is in the details and some might complain that some of the details in this commercial are not paid attention to - no call signs for instance. And some of the concepts are a bit stretched - did he buy that amplifier himself? But the basics are sound, and I think this little boy, Sam, captures our Amateur Radio spirit to a "T". At least I think so. What do you think?
72 de Larry W2LJ
QRP - When you care to send the very least!
Want a crowd
at your next Club meeting? Plan a presentation or an activity! Publicize it well and ahead of time and you're sure to draw out some people - new faces as well as old.
Thanks to Drew Moore W2OU for arranging for Mike Terruso WA4LOQ to come to our ETS of NJ meeting last Friday evening to talk about his high altitude ballooning experiments. What started out as a science project for his son is turning into a combination of ballooning and Amateur Radio for Mike. In fact, ballooning is what got Mike in gear to earn his Amateur Radio license, as he realized it's potential to help him in his endeavors.
The technology that he uses is interesting. A combination of radios, cameras, Raspberry Pi's, GPS devices, temperature and humidity sensors - it was all fantastic to listen to. I've embedded his YouTube video which is a compilation of stills (taken at 5 second intervals) of his maiden launch last October. The balloon was released near Lebanon, PA and landed in Boonton, NJ. It's an hour long video, but you can skip around it if you wish to see the "near space" photos which clearly show the black sky of space and the curvature of the earth's horizon. As Mr. Spock would say - "Fascinating!"
Mike is a "maker" in the sense that he did all his own research and started his project from scratch using materials purchased and/or cobbled together on his own. His next launch is scheduled for sometime in May. He is going to add Amateur Radio to the mix this time and will be getting cooperation from the local radio clubs in tracking and recovery.
Photo courtesy of Drew W2OU
Thanks to Drew Moore W2OU for arranging for Mike Terruso WA4LOQ to come to our ETS of NJ meeting last Friday evening to talk about his high altitude ballooning experiments. What started out as a science project for his son is turning into a combination of ballooning and Amateur Radio for Mike. In fact, ballooning is what got Mike in gear to earn his Amateur Radio license, as he realized it's potential to help him in his endeavors.
The technology that he uses is interesting. A combination of radios, cameras, Raspberry Pi's, GPS devices, temperature and humidity sensors - it was all fantastic to listen to. I've embedded his YouTube video which is a compilation of stills (taken at 5 second intervals) of his maiden launch last October. The balloon was released near Lebanon, PA and landed in Boonton, NJ. It's an hour long video, but you can skip around it if you wish to see the "near space" photos which clearly show the black sky of space and the curvature of the earth's horizon. As Mr. Spock would say - "Fascinating!"
Mike is a "maker" in the sense that he did all his own research and started his project from scratch using materials purchased and/or cobbled together on his own. His next launch is scheduled for sometime in May. He is going to add Amateur Radio to the mix this time and will be getting cooperation from the local radio clubs in tracking and recovery.
72 de Larry W2LJ
QRP - When you care to send the very least!
QRPTTF 2015 – First Announcement!
Living in New Jersey makes filling the requirements of this theme a snap!
Right off the bat, I'm thinking that I could go to Johnson Park in either Highland Park or New Brunswick and operate right on the banks of the Raritan River, which according to Wikipedia:
"The river has served an important water transportation route since the Pre-Columbian era. The name Raritan is also applied to the Raritan people, an Algonquian tribe that inhabited Staten Island, near the river's mouth."
Or perhaps I could go over to Piscataway Township and operate from there:
"The name Piscataway may stem from the area's original Native American residents, transplants from near the Piscataqua River defining the coastal border between New Hampshire and Maine, whose name derives from peske (branch) and tegwe (tidal river),[18] or alternatively from pisgeu (meaning "dark night") and awa ("Place of")[19] or from a Lenape language word meaning "Great Deer".
Or, I could even go to one of my favorite spots, Washington Rock State Park, as it is on the first ridge of the Watchung Mountains, which according to Wikipedia (again):
"The original inhabitants of the Watchungs, the Lenape, referred to the mountains as the Wach Unks, or ‘high hills’.[9][10] Evidence of the Lenape presence in the Watchungs can be seen in numerous camps sites that have been uncovered, mainly along the rivers coursing through mountains and in the small caves abundant in the volcanic rock. It is thought the Lenape favored the Watchungs for their profusion of natural resources, including abundant freshwater rivers and streams, a variety of forests, and plentiful fish and game.[11] They also took advantage of the rich soils and maintained many farm areas where they raised a variety of seasonal crops."
So I have plenty of places to choose from. Sometimes the themes that Paul comes up with can be somewhat of a challenge - for example, last year's "Cinco de Mayo" theme. There's not much in New Jersey that has a true Mexican connection.
This year's theme is pretty easy to comply with.
72 de Larry W2LJ
QRP - When you care to send the very least!
