That happened only once before.

I was in the pileup to work W1AW/0 in South Dakota today. I already have them in the log, but I can’t seem to resist a good pileup these days. Anyway, after I worked them, instead of the normal “TU 73”, I got “W2LJ QRP?”

I answered “YES QRP 73 DE W2LJ” and I got a dit dit in reply.

I guess it was somebody who knows of me. The only other time that  happened was when I worked W1AW/1 in New Hampshire, but I knew going in that Dave N1IX was the operator. Dave is a superb op and fellow Fox hunter.

It would be interesting to know who was behind the key. It sure makes you do a double take when you work a station and the operator is familiar with you, but yet you have no idea as to whom you may have worked.

72 de Larry W2LJ
QRP – When you care to send the very least.

What a blockhead!

I totally screwed up big time in the QRP Fox hunt tonight. After corresponding with Don NK6A, I agreed to be the lower Fox. So what did I do? I set up in the upper half.

And I didn’t realize it even when someone notified me that we were both in the same half – I went up even higher!

Rookie mistake – totally my fault. My apologies to anyone I messed up.

I am going to go find a hole to crawl into, I feel like a moron.

72 de Larry W2LJ
QRP – When you care to send the very least!

Feeling “Fox-ish”

Tonight is my turn to serve as one of the two Foxes in the 20 Meter QRP Fox hunt.  If you have absolutely no idea what I’m talking about – they say a picture is worth a thousand words:

No, no, no, no – not quite, but let me give you the lowdown, if you’re not quite familiar with the concept of QRP Fox hunting, and want to give it a shot. For the “official” rules, please check out: www.qrpfoxhunt.org/
Tonight, Don NK6A and I, W2LJ will serve as the two Foxes. We will both be hiding in the 20 Meter woods, somewhere between 14.050 and 14.070 MHz.  One of us will be the “lower Fox” hiding between 14.050 and 14.060 MHz. The other will be the “upper Fox” hiding between 14.060 and  14.070 MHz.
Your job, as one of the Hounds, is to find us and work us – both.  Don and I will both be working split, that is, transmitting on one frequency and listening on another.  Just like W1AW/XX and DXpeditions and rare DX do. Once you find us, you have to figure out where we’re listening. Once you think you have the spot – and ONLY then, I might add, you will throw out your call sign. Please! Only once or twice – not over and over until the cows come home! The QRP Fox hunts are a great place for learning and practicing pile up discipline.You know ….. the DX Code of Conduct.
The Fox will announce the call sign he has heard and will send his exchange to that station like in this example – let’s say I pick out AB9CA’s call from the pack of Hounds. I will send:
AB9CA DE W2LJ TU 559 NJ LARRY 5W BK
I am saying that I have heard you, AB9CA, your RST is 559, and that I am in NJ and my name is Larry and that I am transmitting using 5 Watts.  Once AB9CA hears my half of the exchange, he will come back with something on the order of:
BK DE AB9CA TU 559 DAVE AL 5W BK
He’s telling me that my RST is also 559, that his name is Dave, that his QTH is AL and that he’s also transmitting using 5 Watts.  ONLY when I acknowledge him with a “TU” and then send a “QRZ?” asking for the next station, is the exchange completed.  If he does not hear my “TU”, then he either has to listen for my fill request(s), or try again later as the exchange was not completed.  Only when both Fox and Hound receive their exchanges, is there a valid QSO. This is known as “grabbing a pelt” amongst us Fox hunters. If you work only one Fox, you have a “One-fer”, work both and you have a coveted “Two-fer”. And believe me, due to band conditions, there will be times you will walk away with a “One-fer” and will be quite happy with it!
That being said, you really do have to try and work both Foxes in a 90 minute period, from 0100 – 0230 UTC. Here on the East coast, that’s from 9:00 to 10:30 PM.  If you’re located in the middle of the country, you probably stand a good shot, as I am in NJ and Don is in CA.  East coast stations may not be able to hear me, especially if the band is long.  West coast stations may not hear Don.  BUT ….. the theory has been known to go out the window compared to reality – so who knows?  Even though it shouldn’t happen, I just might be able to hear up and down the East coast as well as the rest of the US and Canada. It’s happened before! And don’t give up just because you might not hear either one or both Foxes. Band conditions have known to change at the last minute. I can personally tell you that there have been times that I have not heard a Fox for 80 of the 90 minutes of the hunt, only to have him pop his little fuzzy head out of the woods for the last 10 minutes. If I had QRT’ed early, I would have been out of luck. There have been a time or two where I was the last Hound in the hunt to grab a pelt. Persistence can pay off here – big time.
Foxes tend to send Morse at a speed around 20 WPM.  But please don’t feel intimated by that.  If you are comfortable sending and copying at 15 WPM, 12 WPM or even 5 WPM – please call me anyway!  I will slow down for you.
Why should you join in on the QRP Fox hunts?  First off, they are fun! Lots of fun. Secondly, participating will increase your skill sets (buzz word alert!). You’ll find your Morse Code speed increasing and maybe more importantly, your skill in dealing with pile ups will increase dramatically.  I have been participating in the QRP Fox hunts since my call sign was N2ELW – and after a hiatus, have been participating as both a Hound and a Fox continuously since 2003.  My ability to work DXpeditions, special events, scarce DX has increased by light years.  The success I have in DX chasing as a QRPer, I owe directly to the training ground of the QRP Fox hunts.
 Ahhh! The sweet smell of QRP DX!
So don’t be intimidated by the pileup or the code speed. Jump in and give it a go. The fun you will have and the sense of accomplishment from “grabbing a pelt” or two is worth the effort you’ll put in.
72 de Larry W2LJ
QRP – When you care to send the very least!

The USA vs Europe

Disclaimer – this is meant to be a bit of humor – let’s not all get offended!

There are many differences between the USA and Europe:

First off, Europe would fit inside the USA.

You call it petrol, we call it gasoline.
You call them chips (or whatever), we call them fries.
You use the metric system, we’re still on standard.
You use Celsius, we use Fahrenheit.
You call it the cinema, we call it the movies.

And so on, and so on, and so on ……….

But as a Ham, I’ve noticed a big difference in the way we approach special event stations.  Here in the US, for the most part but not always, we apply to the FCC through the ARRL for special 1X1 call signs.  For instance, when the Piscataway Amateur Radio Club celebrated the tri-centennial of the founding of Piscataway, we applied for and used W2P.

The 13 Colonies special event used call signs such as K2I for New Jersey, K2E for Delaware and so on.  The special event station that just celebrated the 45th Anniversary of Apollo 11?  W4A.

But in Europe, you guys take the opposite route!  Special event stations from European nations can be a mouthful.  DM200TSV, SF2014ECC, E72NATO, 3E2000PC, LZ1437MGS and my all time favorite, SV2013ATGM.

What I like about these European call signs is that they try to bear some significance towards the event they are commemorating –  SV2013ATGM was about Alexander the Great, E72NATO celebrated membership in NATO and so on.  A lot more descriptive than 1X1 call signs, that’s for sure.

I’m just waiting to hear one some day that has all the numbers 0 through 9 and all 26 letters of the alphabet. THAT would be a special, special event call sign – a bear to copy, but special, nonetheless!

72 de Larry W2LJ
QRP – When you care to send the very least!

FOBB 2014

I ended up staying home, working from the shack and forgoing my bumblebee number. The weather was partly a factor as one minute it was sunny and five minutes later it looked like it was going to downpour.

The real issue was my back. I woke up this morning with a stiff lower back. Nothing incapacitating, but sore enough that hiking to my FOBB destination while carrying all my gear, and then setting up would have been no fun. Added to that was the fact that my sore back has also slowed me down somewhat, so if I would have had to dismantle the station in a hurry, it would have been a problem.

Even from home, on the good antennas, band conditions seemed to stink. I didn’t hear a lot of FOBB’ers, and those I did hear were pretty weak. Giving out a 559 was generous today. I managed to work 15 stations.

I sure hope band and weather conditions and my back are better for the Skeeter Hunt!

72 de Larry W2LJ
QRP – When you care to send the very least!

Battery problems and a solution

My Chinese Li Ion battery “ol’ Blue” (upper right) has given up the ghost, much the same as Mike VE3WDM has written over at his blog.  In my case, the battery will not take a charge.  The output from the wall wart charger is perfect, but no matter how long it’s connected to the battery, the battery itself will not charge.

I suspect either a faulty cell or perhaps a fault with the little regulator board that’s inside the blue shrink wrap. So the decision had to be made.  Even though the price is relatively cheap, do I buy another Chinese battery or try something else? Do I go back to hauling around my small, but heavy, 5 Ah sealed lead acid battery?

I have a charger that will handle 18650 type Li Ion batteries, as these are what go into the tactical flashlights that I keep in my CERT pack and my radio “Go Pack”.  So I figured that since I already have half of what I need, that I would go a different route this time.

I purchased a pack of 10 type 18650 batteries (upper left) from an American vendor.  The ones I bought are 3.7V and have a rating of 5300 mAh.  I also purchased two of the 4 cell holders that you see above. This gives me two 14.8V, 5300 mAh batteries. All I had to do was solder on the connector that goes directly into the KX3.

I tried them out today and they seem to work without any problems.  I will use a fresh charged pack tomorrow for FOBB and will see how long one pack lasts before I have to switch over to the backup pack.

72 de Larry W2LJ
QRP – When you care to send the very least!

FOBB this weekend!

I wonder if this is what Rich KI6SN had in mind as a high tech Bumble Bee when he started this contest years ago? (Looks a bit on the QRO side to me – grin!)  

Just a gentle reminder that the Flight of the Bumble Bees is this coming Sunday!  When I last checked the roster, only about 100 folks have signed up for Bee numbers.  That number seems low to me as compared to years past.  This is an excellent sprint and is so much fun – it’s almost illegal in this day and age to be able to have this much fun!

So sign up to be a Bee – lets give Rich some work these last few days and get that Bee number up there! And then get out on Sunday with your favorite QRP rig and get some fresh air and get your fun tanks topped off!

Bumble Bee Roster – http://bit.ly/15aGgN1

Da Bee Rulz – http://arsqrp.blogspot.com/2014/07/announcing-ars-2014-fobb.html

72 de Larry W2LJ – Bumblebee #17
QRP – When you care to send the very least!


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor