AmateurRadio.com

While I was at my “regular job” yesterday, I along with countless others on the east coast, felt a 5.9 magnitude earthquake. I was leaning against a table helping someone with setting up a new computer and felt the table start to move. The first thing that ran through my mind was someone was shaking the table. It was almost surreal.

Courtesy Google Maps

No one else really realized what was going on or even felt it. And I didn’t even think it was an earthquake till I saw on twitter what it really was. But because of that, I have decided to post a few links to information to have in case a bigger quake should hit. And even a little video from a couple of my co-workers.

First up, I found an article from the San Fransisco Gate on making a preparedness kit. It’s usually a good idea to have these around on a regular basis anyways for not just an earthquake, but any other kind of disaster that could happen. Food, water, a First Aid kit and a radio with some extra batteries are a good idea to have, along with clothing and important documents to take with you. You could also buy a premade kit, but those seem to be way more expensive compared to what you could do with just what you have at home.

But as Ham Radio operators, some of us are prepared for even more, having generators to power the house, as well as battery backups for the radios and computers. These kind of things are on the “To Do” list for when I do get a house with the YL. For now, I’m ready with the basic kit.

This little “rumbler” was just a reminder that even here in the Northeast, that we can feel the effects of an earthquake too. While It was thankfully a “small” one by comparison to many others that have caused countless deaths and millions or even billions of dollars of damage, it’s still a kind of sobering thought that these can happen. But, there is a side of humor too it as well, as shown in this video from my co-worker Brian Sinkoff, who is host of a local sports talk show and program director of the ESPN radio affiliate here in town. Even my program director Rob Dawes gets in on the act. But note at the :20 second mark of the video, you see a quick pan of the camera and you get a glimpse of Rob standing in the door way, which from what I understand is something you should do in a quake.You can’t miss him in his bright yellow shirt. I have to remember to call him out compliment him on his fashion sense.

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday on AmiZed Studios.

I’ve seen a couple of stories about this video already, so I figured I would post it too, and get Randy a little more traffic to the YouTube video. Randy headed to Petaluma, CA, and hung out at the TWiT Brickhouse with Bob Heil, K9EID and Leo Laporte, W6TWT, for the first day of the new Ham shack in the Brickhouse Studio.While Randy was there, he of course recorded some video and shared it with everyone else. There was also a special event station on the air for the open house, which I talked about last week. I’m curious if anyone who reads me, also worked the special event? If you did, please share in the comments. I would love to hear how it went. But now, Lights! Camera! ACTION!

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday here on AmiZed Studios.

Jumping out of a fully working airplane from 13,000 feet is not exactly my cup of tea. When I stand to high on a ladder I get a little woozy. But this guy jumped from an airplane and using 70cm Amateur Radio Television, shared ti with other Hams. Mark, AF6IM, strapped on a parachute, and a 427 MHz ATV transmitter hooked to a helmet cam and jumped from an airplane to land safely while he transmitted, using a Drake mini-modulator with foldable dualband J-pole, that he released after his chute opened and he floated down to the ground.

As you can see from the video below and the info Mark gave about the jump, the Drake can act as a transmitter when an antenna is hooked to it, but the signal was weaker then expected and only worked when he got to about 2000 feet. He said he may try a linear or use a 5 watt Videolynx ATV transmitter next time he does it.

Mark was transmitting on 421.25MHz or cable tv channel 57, and the recieving station was using a 3-element 70cm UHF antenna connected to a Sansui TV set with built-in VHS deck set to catv channel 57. Improvements are being looked at from what was learned from this jump, and another may be in the future.

If you want to find out more, you can visit the Parachute Mobile website.

So after oversleeping this morning, I managed to find a nice video that I can share with all of you. It’s nothing groundbreaking. It’s just a time lapse video of a gentleman putting together an Elecraft K3 from unboxing to finish. Pretty interesting to see the process. I have yet to build from a kit, but this is pretty cool. So watch it and enjoy. In the mean time, I’m going to go have a snooze or something. But here ya go.

With the new opening of the TWiT Brickhouse studios, Leo Laporte, W6TWT is going to be hosting a special event station to celebrate the opening of the new studio, with the help a few area Hams.

Photo Courtesy of Leo Laporte – W6TWT

The Redwood Empire DX Association, who have been helpful in getting the new Amateur Radio station setup in the TWiT studios, will getting part of the special event station where visitors will be able to see the new studio and the classic Collins AM Broadcast station that will be on display and available for Hams to use 10am to 7pm on Saturday and 10am to 3pm on Sunday. The news release says each day, so I am assuming this is only for the special event. But I do remember Leo saying something about the station being available for other times, during an episode of Ham Nation. I’m sire someone will clarify this info.

The special event will use the call sign W6KB, but no word on specific frequencies to watch for the station, just that it will be on 40 and 20 meters in the afternoon and evenings. If any new info comes out, I would think it’ll show up on either Leo’s Ham Radio page or on the thread discussing this on QRZ.com.

Anyone who does make a contact with the station, can QSL direct to W6TWT, P.O. Box 1018 in Petaluma, CA. 94953 .

Wish I could work these, but I still don’t have HF and will be out of the loop for a couple days because of my other job in broadcast radio. But hey, I get to hang out with some real kick ass bands this weekend. So it’s not a total wash.

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday here on AmiZed Studios.

I’ve been seeing on the googles and the twitters, that HeathKit is going to start selling kits again, but not for Ham Radio. They are going to start selling “Do It Yourself Kits” for around the house. While this is great, It’s kind of useless for me.

Photo Courtesy of Wikipedia/Louis F. Sander

The first two kits they are offering is a garage parking assistant and a wireless swimming pool monitor. I’m sure these will be great kits and lots of fun to build for many people out there, but not for me. You see, I live in an apartment. Curses, foiled again! But in seriousness, with Heathkit’s come back, it kind of makes me wonder why now? I’m guessing the economy is not what it used to be and money is getting a little tighter. So they are just firing up an old revenue stream that has been dormant a long time and getting back to what worked?

I have never built from a kit, but I have owned kit made electronics before, buying them after the person who made them, then got tired of them. I used to own a nice Heathkit AM/SSB HF transceiver back in the early days of my license. I think it was around the time I upgraded to General Class.  While they haven’t started offering anything Ham Radio related yet, they are looking for suggestions for new projects. A couple that come to mind for me would be, an APRS kit and maybe a small CW or SSB transceiver for backpacking or mobile use. That would have to be pretty rugged though, so not sure how that would play out.

But with Radio Shack also getting back into the DIY arena too, things are starting to come full circle and we’ll have a new generation of kids able to build some pretty cool things on the weekends, keeping them off the interwebs thingy and the facebook doo-dads. Maybe even a return to the catalogs we would get every now and again, and would eagerly await in the mail, like I used to wait for the Sears and Montgomery Wards catalogs for Christmas to see all the toys. But being the 21st century, the catalogs would be in PDF format, and delivered by email.

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday here on AmiZed Studios.

So Google has announced that it is buying Motorola Mobility, a spin off of the original Motorola. The main focus of the company is mobile handsets. But with a little extra work, could Google maybe diverse even more into ham radio? Chances are, they wouldn’t, but let’s take a trip to “Fantasy Land” and see what it could be.

Photo Courtesy of Wikipedia/Coolcaesar

So, Google decides to move into Ham Radio. Motorola has already been building commercial radios for years. Some of them can be re-tuned for the ham bands. So let’s say they design and build a small “Smart HT”. Using Android, they could offer a ton of great features on it. Maybe like a Software Defined Radio  type of device, with DSP filtering, along with standards like CTCSS. APRS built in and maybe even a D-Star alternative codec, but still have backwards compatibility with the current. Why not Bluetooth and WiFi for Echolink? Use apps to increase functionality? Can it be done? Would you want something like that? How would it look and work? Or am I basically describing an iPod Touch or Google Android Phone?

This is all speculation of course, but could Google build a “Smart HT”? What would be the next generation of HT’s be like? I wouldn’t mind hearing what you would like to see in these “Smart HTs” should they ever be built. It almost fuels the imagination huh? Let me know what you think in the comments.

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday here on AmiZed Studios.