AmateurRadio.com

This is a short introduction to Linux for Amateur Radio Operators showing a few things that are available for Amateur Radio.

I have just set up an ANSRVR notification group (the APRS equivalent of an email reflector) called CDGVHF. The purpose of the group is to alert interested subscribers in the Cumbria, Dumfries and Galloway area to possible openings on the 6m, 4m, 2m and 70cm bands.

The APRS alerts make use of the email alert service of DX Sherlock which sends alerts of possible band openings customized to the subscriber’s location, based on DX Cluster spots and other reverse beacon information. I have set up a subscription to send alerts of possible band openings workable from the IO84 grid locator to a special email address on the G4ILO’s Shack web server. Using a feature of the cPanel web hosting, the email is “piped” to a script written by me in the PHP language. This extracts the subject header of the email which contains a succinct description of the alert, shortens it as much as possible and then sends it as a message to the CDGVHF ANSRVR group, which then forwards it to all interested subscribers.

Why is this better than just subscribing directly to receive the alert emails? Because I can now receive the alerts on my APRS-equipped hand-held, which should greatly reduce the chance of missing a good band opening because I wasn’t in the shack at the right moment.

Introduction:

• Intro from Pete, VE2XPL, host of the wAVEgUIDES pODcAST.
• Promo for the GNU World Order podcast.

Announcements:

• Hello to the new folks in the chat room.
• The Mintcast podcast is either going to stop or will have new hosts after the next episode. If you’re interested in hosting a podcast, contact the folks over there.
• Please spread the word about MAGNetcon, the Mid-America GNU/Linux Networkers Conference, to be held May 6-7, 2011 at the St. Louis Union Station Marriott. If you know anyone that might be a sponsor, exhibitor, or speaker, please let us know. Application forms are available on the web site.
• Check out the new website for Resonant Frequency.
• Also mentioned, the Going Linux podcast and Computer America, “America’s longest-running nationally syndicated radio talk show about computers.”

Feedback:

• Richard, KR4EY, writes about CW… wait, we did this one in Episode 52.
• John, KC8DAX, weighs in on the Windows vs. Linux debate: there are hams that will buy a wire antenna and there are others that will build one. He thinks it’s the same thing with operating systems. Would you want a radio you couldn’t open? Our hosts discuss.
• We received a donation from Charles to help send Linux in the Ham Shack to the 2011 Dayton Hamvention. Thank you, Charles!
• Joe, K1RBY, recently discovered the podcast and is catching up, but is having a problem using gpodder to retrieve episodes. Yes, Joe, there is a bug in one of the WordPress plugins on the web site that contributed to the problem (see lhspodcast.info for a description of the problem.) It has been corrected.
• John, K7JM, also had the problem with gpodder and sends his appreciation for the fix.
• Richard, KJ4VGV, tells us that he is a new amateur radio operator since May and has published an article: Antenna Restrictions: Are They a Catastrophe Waiting to Happen? Good job, Richard!
• James, N2ENN, comments about our episode 52 when we discussed Unity, and offers his thoughts on Wayland, Debian and Ubuntu. Our hosts discuss, and digress to a discussion of browsers, plugins, drivers, ALSA and PulseAudio on Debian vs. LinuxMint Debian Edition. They also commment on Bill Meara’s (of SolderSmoke fame) efforts to get WSPR running under WINE in Ubuntu.
• Paul, KE5WMA, writes “PIC micro controllers are getting more popular in HAM projects. Any suggestions on programming software and boards?” Well, Paul, Linux does still support serial ports, but this may be a good topic for another show. You might find something useful in the many hits returned by a Google search on “Linux PIC programmer”.
• B.B., KC5PIY, asks for help with getting Windows programs for programming radios, such as the Icom IC-2820H and IC-706 MkIIg, running under Linux. He’d also like an APRS client. Richard recommends UIView as an APRS client for Windows, and Xastir for Linux. Russ suggests that most of the radio programming applications will run under WINE in Linux. Also, check out CHIRP, free Linux software for programming a variety of D-STAR radios. You may also want to explore the D-RATS mailing list. It’s not likely you’ll be able to dual-boot Windows and Linux on that netbook, but you can install Ubuntu Linux using WUBI, which would allow you to run Linux within Windows, or install Linux to a USB flash drive using Pen Drive Linux.
• Craig, KB5UEJ, writes about learning IPv6: “I went through the Hurricane Electric certification program and really learned lots about IPv6. I’m now running IPv6 on my home using HEs IPv6 tunnelbroker service. It’s no longer the big bad scary thing that it used to be.” Russ also talked about IPv6 on episode 6 of his QSK podcast.
• Matt shares his thoughts about building “simple” projects from junk box parts and the similarity to running Linux.

Contact Info:

• Contact Richard at [email protected], Russ at [email protected], or both at the same time at [email protected].
• Listen to the live stream every other Tuesday at 8:00pm Central time. Check the LHS web site for dates.
• Leave us a voice mail at 417-200-4811, or record an introduction to the podcast.
• Sign up for the LHS mailing list.
• Sign up for the MAGNetcon mailing list.
• LHS merchandise is available at the SHOP! link on Web site. Check out the Badgerwear or buy one of the other LHS-branded items at PrintFection.com/lhs or Cafe Press. Thanks!
• Thanks to Dave from Gamma Leonis for the theme music.

Music:

• “Balboa” by Ness from the album Fiesta, courtesy of Jamendo.
• “Crawling Back In” by Deathalizer from the album It Dwells Within, courtesy of Jamendo.

Hi, folks. Episode #054 of Linux in the Ham Shack is an all-feedback episode. We cover a lot of ground in this one, from how to run Linux using WUBI, via dual boot, from a flash drive and more. There’s a bit about PIC controllers, feed problems, sticks in the mud, a sprinkling of badgers and a whole lot more. Keep that feedback coming. We love it!

73 de The LHS Guys

A week or so ago my application to operate a part time attended EchoLink node on the 2m band was granted. I didn’t receive any notification of this, I just happened to check the relevant page of the RSGB Data Communications Committee website and noticed that my entry had turned black and an expiry date had been added.

G4ILO-L is EchoLink node number 3098 and operates on 145.2125MHz with a CTCSS Tone of 77.0Hz. As stated the authorization only allows the node to operate when I am on the premises. It uses the non-APRS side of my Kenwood TM-D710 so in practise it will also only operate when I don’t want to operate on 2 metres myself. Therefore it is more likely to be on during the evening UK time than during the day.

The license only allows me to use 5W ERP. Due to my location in the RF black hole of Cockermouth the range will only be a few miles so the number of stations able to access it can probably be counted on the fingers of one hand. Most of the time I will be monitoring the node myself on one of my handhelds so if you call me after connecting there is a good chance I will reply.

I do intend to post a page on my website explaining to other stations in the area how to use it if they want to, but at the moment the number of things to do exceed the available time.

I have developed a script to post the status of the node to the APRS network so an easy way to see whether my node is running or not would be to look up EL-3098 at aprs.fi.

NASA has asked amateur radio operators for help to determine if a recently launched satellite is operating. The NanoSail-D satellite was ejected automatically from the Fast Affordable Scientific and Technology Satellite, FASTSAT on Wednesday, January 19. NASA needs reports of the beacon telemetry to determine if it is operating correctly. The beacon signal is on 437.270MHz using standard AX.25 packet so APRS and packet radio operators with 70cm capability should be able to receive it.

Predictions for the satellite can be found here. Reception reports can be submitted here. Full text of the NASA press release here.

One of the reasons why I have not been an enthusiast of the D-Star system is that it creates a separate class of activity incompatible with existing voice modes just for the dubious benefit (from an amateur point of view) of using digital voice instead of analogue. Using EchoLink, IRLP and APRS we already have a global network that allows one ham to contact another anywhere in the world using ham radio, one that does not require anyone to purchase expensive new equipment from Icom or anyone else. What we have not done is put it together in a way that makes it work seamlessly as a coherent network.

Automatic Voice Relay System (AVRS) is an idea by Bob Bruninga, WB4APR, the inventor of APRS, first published in 2000, to create a system that allows users of EchoLink, IRLP and even D-Star to inter-communicate. APRS provides the location and identification information for the analogue FM EchoLink and IRLP users, something that is already built in to the D-Star system. As is often the case, those who have the great ideas don’t always have the skills needed to bring them to fruition, so AVRS remained little more than an idea for ten years.

Now, apparently, a developer has been found who is able and willing to write the software that will enable AVRS version 2 to come into being. You can read more about AVRS here. For seamless one-button operation you will need one of the new generation of APRS-capable radios (Kenwood TM-D710, TH-D72 or Yaesu FTM-350) that are able to QSY to a frequency contained in an APRS packet. Some will argue that if you are going to buy one of those, why not buy a D-Star radio instead? But AVRS capability, being based on APRS, can easily and inexpensively be added to any analogue FM radio. AVRS will not leave analogue FM users out in the cold because their local repeater converted to D-Star, as has happened in some parts of Britain.

One of the interesting aspects of AVRS version 2 is the development of A-Star repeaters. These are analogue FM repeaters with a D-Star gateway that use the D-Star network to link them together. Callsign and location (if known) information is transmitted as a 0.3sec APRS packet burst at the end of each over. A-Star users will appear to D-Star users just like other D-Star users and can easily intercommunicate. A-Star users can initiate a contact with another A-Star or D-Star user just by sending an APRS message starting with A*. A-Star users don’t even need to be monitoring a repeater in order to be contactable: they will receive the message as an ordinary APRS message and can QSY to the repeater (with one button press if using one of the radios mentioned above) using the information contained in it.

AVRS looks like a great idea with the potential to bring digital and analogue voice users together. It might even erode some of the analogue vs D-Star conflict.