While investigating some potential Summits On The Air (SOTA) peaks, someone sent me a link for the FAA weather cam that was on a particular peak. I was able to get a real-time look at the snow on the summit and see the terrain. Of course, the world is full of many different webcams providing real-time video but somehow I had overlooked the FAA webcams. (I am sure some of the pilots out there are thinking “duh, everyone knows about these.”) This caused me to spend some time looking at the various FAA webcams available.

Monarch Pass

There is a weather cam at the radio site on South Monarch Ridge (W0C/SP-058), a popular SOTA summit. It is labeled Monarch Pass, which is located below the summit. The orientation of the four cameras is indicated on the map. Besides being on a SOTA summit, this camera is in a great spot to see Monarch Ski Area, the south end of the Sawatch Mountain Range, and the north part of the Sangre De Cristo Mountain Range.

Here’s the camera view looking northwest from South Monarch Ridge. You can see towers and cables for the tram that goes up to the summit during the summer months. The Continental Divide and the Monarch Pass Ski Area are in the center of this image.

Wilkerson Pass

Another popular SOTA summit, Badger Mountain (W0C/SP-072),  has a weather cam on it, labeled for Wilkerson Pass, just below the mountain. Shown below, the SW camera from Wilkerson looks out over South Park with the Sawatch Range off in the distance.

There are many more weather cams around the state and across the USA. They provide a real-time look at what is happening in the mountains which is complementary to a good weather forecast. Take a look to see what cameras are in your area that can be helpful.

73 Bob K0NR

The post Check Wx Using FAA Webcams appeared first on The KØNR Radio Site.

Wrapping up another year!

The November - December 2023 Communicator, digital periodical of Surrey Amateur Radio Communications is now available for viewing or download.

Read in over 145 countries, we bring you 134 pages of Amateur Radio content from the Southwest corner of Canada and elsewhere. With less fluff and ads than other Amateur Radio publications, you will find Amateur Radio related articles, projects, profiles, news, tips and how-to's for all levels of the hobby.

You can view or download it as a .PDF file:  

Previous Communicator issues are at:

https://ve7sar.blogspot.com/search/label/The%20Communicator

and a full index is HERE.  

As always, thank you to our contributors, and your feedback is always welcome. 

The deadline for the next edition is December 15th.

If you have news or events from your club or photos, stories, projects or other items of interest from BC or elsewhere, please contact us at [email protected]

73,

John VE7TI
'The Communicator' Editor

I was happy to contribute an article to the recent ARRL Parks On The Air (POTA) book. This piece is based on my Pikes Peak mountain topping article that appeared in the June 2023 issue of QST. This book is a collection of articles about POTA from 14 different authors, each writing about a different aspect of the program. The articles are all easy to read and generally provide a first-hand account of how the author has experienced POTA operating. There is plenty of beginner information and operating tips sprinkled throughout the book. More experienced POTA enthusiasts will probably pick up a few new ideas as well.

The Table of Contents below lists the articles and authors, giving you a good idea of the material covered. The meat of the book is only 118 pages long and it is quite easy to read.

My piece covered the triple activation I did from the summit of Pikes Peak, combining POTA, SOTA, and the June VHF Contest into one mountaintop adventure. For POTA, the park was the Pike National Forest (K-4404). I’ve done this type of combo activation in the past, sometimes just SOTA + POTA or just SOTA + VHF Contest. This time I did all three.

The book is available directly from the ARRL or from the usual book outlets such as Amazon.

73 Bob K0NR

The post ARRL POTA Book appeared first on The KØNR Radio Site.

The FCC will be voting on and will likely approve a Report and Order that eliminates the symbol rate restriction on HF data transmissions, replacing it with a bandwidth limit of 2.8 kHz. See FCC To Vote on Removing Symbol Rate Restrictions. The symbol rate limit of 300-baud is an obsolete way of limiting the signal bandwidth, created back when the data transmissions were predominately Frequency Shift Keying (FSK). It was a simple, practical way to regulate the bandwidth at that time but technology has moved on. The use of digital signal processing and efficient wireless encoding techniques require a better approach to bandwidth regulation.

A practical impact of this change is to allow higher speed protocols such as PACTOR-4 having a bandwidth of 2.4 kHz. I suspect we will see other protocols emerge that squeeze the best data rate out of the 2.8 kHz bandwidth.

Living in a Narrowband World

The FCC proposal implements a 2.8 kHz bandwidth limit on data emissions on the HF bands. Some folks have suggested a narrower bandwidth while others argue that wider bandwidth signals should be allowed. And some even think we should have no bandwidth limit at all.

The problem is that the amateur HF bands are not very wide. For example, the popular 20m band is 14.0 to 14.350 MHz, providing only 350 kHz of spectrum. Common practice on this and the other HF bands is to use modulation types that have bandwidths of 3 kHz or less. (Yeah, AM signals are twice that wide, at 6 KHz, a topic for another day.) Of course, CW and some of the data modes are much narrower than 3 kHz. But the general approach to regulating HF is to allow many narrowband signals on the band. Limiting HF data transmissions to 2.8 kHz bandwidth is consistent with existing practice while still allowing for innovation and experimentation.

VHF/UHF Bandwidth Limits

The FCC also plans to issue a Further Notice of Proposed Rulemaking (FNPR) that:

• Proposes to remove the baud rate limitation in the 2200 meter and 630 meter bands, which the Commission allocated for amateur radio use after it released the Notice of Proposed Rulemaking in 2016.
• Proposes to remove the baud rate limitation in the VHF and UHF bands.
• Seeks comment on the appropriate bandwidth limitation for the 2200 meter band, the 630 meter band, and the VHF/UHF bands.

I won’t comment on the 2200 meter and 630 meter bands. The FCC proposes to remove the symbol rate limit on the VHF and UHF bands and asks what bandwidth limit is appropriate. The current bandwidth limits are 20 kHz for the 6m and 2m bands, 100 kHz for the 1.25m and 70 cm bands, and the FCC seems fine leaving these the same. Authorized emission types are listed in FCC Part 97.305.

With 4 MHz of spectrum, the 2m band is much wider than any of the HF bands. It might be tempting to conclude that there is plenty of room for wideband signals on this band. Many hams think 2 meters is just used for FM simplex and repeaters but a closer look reveals that it supports many diverse modes: weak-signal SSB/CW, meteor scatter, EME, FM simplex, FM repeaters, digital voice modes (D-STAR, DMR, Fusion), satellites, and more. The 20-kHz limit seems appropriate, as it roughly matches the bandwidth of the most common (FM) voice signals on that band. It is not an appropriate band for trying out wider bandwidth signals.

The 6m band should probably keep the same 20-kHz limit. (I don’t think there is a compelling reason to change it.) The 1.25m band already allows 100-kHz bandwidth data signals, which some radio amateurs have used for higher-speed data links (still not what I would call wideband).

The 70 cm band is much bigger (420 MHz to 450 MHz) and could accommodate some wider bandwidth signals. Perhaps the existing 100-kHz limit should be increased? Keep in mind that fast-scan ATV is allowed on this band with a bandwidth of 6 MHz. Maybe we can make some room for a few larger bandwidth data channels, to encourage innovation and experimentation.

The bands above 70 cm have no bandwidth limit other than the signal must stay within the designated ham band. It has been this way for a long time, without causing any issues (that I know of).

Conclusion

The FCC’s proposal makes a lot of sense and it is long overdue. Frankly, it is a bit of an embarrassment that it has taken so long.

Better late than never.

73 Bob K0NR

The post Adios Symbol Rate Limit appeared first on The KØNR Radio Site.

Lobo Overlook is an excellent summit and tourist spot near Wolf Creek Pass, one of the most scenic passes in Colorado. I’ve been up there for VHF contests and other mountaintop operations and initially thought it might be a SOTA summit. No such luck, as it is superseded by a higher summit nearby (W0C/RG-169). Lobo Overlook is accessed via an easy 3-mile gravel road just off the pass. The road leads to two small loops at the top, one of which is the actual Lobo Overlook while the other goes to an obvious radio site. The trail to RG-169 is best accessed from the radio site, so we parked there. Wolf Creek Pass and Lobo Overlook sit right on the Continental Divide and the Continental Divide Trail (CDT) passes through here just a bit to the west.

Lobo Peak

This unnamed summit is listed as 11820 in the SOTA database. However, Lists of John (which was used to create the W0C SOTA database) shows this summit as 11831. My topo map seems to agree with 11831, so this might be an error. Of course, such a cool summit near the CDT deserves a name, so Joyce/K0JJW and I decided to call it Lobo Peak, for obvious reasons. (I looked for an existing nearby Lobo Peak and did not find one.)

Near the radio site, we started at the marked trailhead and headed west on Lobo Trail (878), actually going downhill to intersect the CDT about a half mile down the trail. At the trailhead, it was not obvious which summit we were headed to and it might not even be visible at that point. The summit did reveal itself as we headed down the CDT (see first photo above). We followed the CDT to a visible game trail that takes off steeply to the right (lat/lon 37.49765, -106.81515). There are several game trails that split off, heading up towards the saddle to the left of the summit and we stayed on the most established one. We set up our station within the activation zone just below the actual summit, avoiding the rock scrambling to get to the top.

The one-way distance on the trail is 1.2 miles with an up-and-down profile. Lobo Overlook is only slightly lower in elevation from “Lobo Peak”. The trail starts at about 11,770 feet, descending to a low point of 11,500 and back up to 11,800 at the summit. So that produces a net ascent of about 300 feet, maybe more, one way. Of course, you get to repeat this on the way back.

SOTA and POTA Activations

Once in the activation zone, we deployed the IC-705 on 2m FM, driving the 3-element Yagi antenna. We worked Travis/KB9LMJ on 146.52 MHz, who was mobile in Pagosa Springs. Further calling on 2m FM did not yield any contacts, but K0JJW and I did work each other on VHF/UHF. We had anticipated that this might be a tough place to activate on VHF, so we brought along the HF gear and set up an EndFed Halfwave antenna for 20m. Propagation was good and we soon worked 11 stations on 20m SSB.

This summit sits right on the dividing line between the Rio Grande National Forest and the San Juan National Forest, both valid for Parks On The Air (POTA). We opted to operate from the Rio Grande side (K-4405) because that was a new one for both of us.

Continental Divide Trail

I’ve hiked sections of the Continental Divide Trail before, including some pre-SOTA backpack trips with Denny/KB9DPF. It is a great trail because it runs along the backbone of the Rocky Mountains. It is often accessible via roads to high mountain passes. (Another example is Wander Ridge, just off Cottonwood Pass.) Once you hop onto the CDT, you are hiking an established trail that is literally on top of the world.

This is an excellent, easy-to-access summit in the Wolf Creek Pass area. So if you are in the area, this might be one to activate. The road to Lobo Overlook is closed during the winter.

73 Bob K0NR

The post Another Continental Divide Summit (W0C/RG-169) appeared first on The KØNR Radio Site.

Argentine Peak (W0C/SR-019) is a high 13er (13,738 ft) in the Sawatch Range of the Rocky Mountains. I had my eye on this summit for a Summits On The Air (SOTA) activation for quite some time now. This summit is a short distance from Argentine Pass, which is the fourth-highest road in Colorado at 13,207 feet. A non-radio goal I have is to drive the Jeep up the twenty highest roads in Colorado, so Argentine Pass is on that list. Not only that, Argentine Peak sits on the Continental Divide, separating the Arapaho National Forest and the White River National Forest, so it can also be activated for Parks On The Air (POTA).

So the plan emerged: Joyce/K0JJW and I would take the Jeep to Argentine Pass and then climb up to Argentine Peak for a SOTA and POTA activation. The road is usually blocked by snow for much of the summer, making it a late summer/early fall adventure. Somehow September slipped away and it is now October, but fortunately, the road is still open. Note that the more common way to hike Argentine Pass is from Silver Dollar Lake trailhead (see KX0R trip report).

The Road

The 4WD route starts with FS 248.1 as it leaves Guanella Pass Road, about 3 miles south of Georgetown, CO (see map above). The forest service road takes off at a point where the Guanella Pass Road takes a very sharp bend. You should have a good topo map to guide you on this route as there are quite a few roads in the area. In general, you follow FS 248.1 which has some subvariants such as 248.1B and 248.1K. The exact choice of roads is not critical but, eventually, you need to get on FS 724.1 which sports a few wide and steep switchbacks up to Argentine Pass. The one-way distance is 9 miles and it took us about 1.5 hours to make the drive.

This road and route is considered moderate 4WD and FS 248.1 provides a good taste of that right after you leave the paved road. Many other sections of the road are easy 4WD but there are some challenging spots along the way. This is a real 4WD road, so you’ll need a decent high-clearance 4WD vehicle in the class of a Wrangler, Bronco, 4Runner, etc. We drove a stock Jeep Wrangler and had no trouble. However, at one spot, the wheel placement was very critical, so Joyce spotted me as I drove through it. Not that difficult…unless you screw it up.

The Climb

As shown below, the climbing route up Argentine Peak (blue line) follows the Continental Divide ridge line as it heads south from Argentine Pass. The road up Argentine Pass ends kind of high in the pass, so at first, we were walking downhill. A faint trail follows the top of the ridge but fades out in many places. Looking at the topo map, I underestimated how much up and down there would be on the ridge but it was not too difficult.

The hike is about 1 mile with 650 feet vertical (one-way). We had fantastic weather in October: sunny, with temperatures in the 40’s F and some light wind (10 to 15 mph). This is one of those top-of-the-world hiking experiences, right along the Continental Divide.

As you can see from the photos, there were some patches of snow on the ground, but it was not an issue for hiking. A real Mountain Goat (not a SOTA Mountain Goat) wandered by and paid us a visit.

This mountain goat wandered by while we were on the summit.We used our standard 2m/70cm FM station: Yaesu FT-90 running 30 watts to a 3-element Yagi for 2 meters or a 7-element Yagi for 70 cm. We worked stations mostly on 146.52 MHz FM and a few on 446.0 MHz. With downtown Denver about 45 miles away, we easily worked stations in the greater Denver area. We were also successful working stations out to 60 or 70 miles, often with good signal reports in both directions. We both made 20 QSOs using VHF/UHF.

For POTA, we were right on the dividing line between White River NF and Arapaho NF but needed to choose one for our activation. We had previously activated Arapaho, so we chose to operate from White River NF on this trip (K-4410) which is a new park for us.

Summary

We had an absolute blast on this activation. I think it was the combination of a Jeep trip, hiking, SOTA, and POTA all wrapped into one adventure that made it so good. As a bonus, we had excellent weather and a visit by the mountain goat!

73 Bob K0NR

The post Argentine Pass and Argentine Peak appeared first on The KØNR Radio Site.

 SARCBUZZ

Monthly News and Announcements
Celebrating 50 years of service - 1975-2023

September 30, 2023

• CQ WW DX Contest (SSB)
  October 28/29 Don’t miss out on your chance to compete in the largest Amateur Radio contest in the world. Over 35,000 participants take to the airwaves on the last weekend of October with the goal of  making as many contacts with as many DXCC entities and CQ Zones as possible. Both seasoned SARC DXers and GOTA newbies are invited to participate as a VE7SAR team. Coaching will be available to those who request it. Whether we operate two radios as Multi-Two (Low Power) or one radio as Multi-One (High Power) will depend on the number of operators signed up. Both Larry ([email protected]) and John ([email protected]) will collect names of those who wish to participate, and prepare a schedule. The team already has the September CQ WW RTTY contest under its belt and is looking forward to this next challenge.

• Soldering Workshop
  October 21 8:30 am - Noon. FULL This workshop is for those new to soldering or wishing to refresh their skills. As presented by Dino (VE7XDT) and John (VE7TI) the workshop includes an introduction to soldering, types of soldering irons and stations, and  the construction of an xmas tree circuit board (agenda attached). This workshop is FULL but if you wish to be put on a waiting list or have interest in the next workshop you may contact John VE7TI or Larry VE7LXB .

• Delta ARS Comfest

Sunday October 15 10am - 1pm The long tradition of the ComFest Amateur Radio Swap Meet continues. It is a great venue to meet fellow hams, buy and sell gear and or simply discover what the world of amateur radio has to offer. 1720 56th Street Tsawwassen. General admission $5. Major door prizes.

• SARC Monthly Meeting
  Wednesday October 11th 7pm - 9pm. Location: Surrey Fire Hall Training Centre. The guest speaker for the next meeting is Halden Field VE7UTS. Halden is a member of the North Shore ARC and a past contributor to their newsletter and to The Communicator. Halden has presented at several west coast Ham Fests including at Seaside Oregon. He will be speaking on some of his favourite amateur radio construction projects.

• Saturday Morning Breakfast and OTC
  SARC Meets informally for breakfast at Denny’s Restaurant 6850 King George Boulevard in Surrey, between 7:30 and 9:00am each Saturday morning. We’d love for you to join us. Following breakfast, the OTC will be open from 9:30 until noon. You are invited to come down to the OTC with your equipment and any ham-related issues and our Elmers will try to assist you. You can also reach Elmers by email at [email protected].

Thank you for being a SARCBuzz reader.

[email protected]

Calendar of Events