AmateurRadio.com

In the September 2015 QST magazine, there is an article about FSQCALL. This is an interesting digital mode with some free software to send quick, short messages between other hams. It’s meant to be more conversational than PSK – you type a sentence, hit enter, and away it goes. It has some selective calling features that let you address stations individually.

I loaded the software on my Windows 10 desktop, turned on my KX3, and was up and running on 30M with 5 watts in about 5 minutes. The software is pretty simple, especially after watching a couple of videos on YouTube first. I ran into Jim, W1PID, and also talked with Maine, and Texas.

For me, this is a great place to just hang out and see who’s around. No expectation of making endless CQs on 14.070, or sharing signal reports on JT65.

The simplest application for FSQCall is that it provides a ‘watering hole’ for a group of friends who wish to keep in touch and chat occasionally. Experience has shown that leaving your equipment running on 7105 kHz during the day, and 3580 kHz at night, will provide fairly reliable communications over about a 500 – 1000 km range. Depending on propagation, 40m may well work day and night. Only modest power is required. You can leave a message for your friend if they aren’t available, and even use one friend to relay a message to another. The software will tell you who is currently available.

I’m going to play with the message store/forward functionality next. If you didn’t see the QST article, you can read more  from ZL1BPU. Or, take a look at this video:

In the September 2015 QST magazine, there is an article about FSQCALL. This is an interesting digital mode with some free software to send quick, short messages between other hams. It’s meant to be more conversational than PSK – you type a sentence, hit enter, and away it goes. It has some selective calling features that let you address stations individually.

I loaded the software on my Windows 10 desktop, turned on my KX3, and was up and running on 30M with 5 watts in about 5 minutes. The software is pretty simple, especially after watching a couple of videos on YouTube first. I ran into Jim, W1PID, and also talked with Maine, and Texas.

For me, this is a great place to just hang out and see who’s around. No expectation of making endless CQs on 14.070, or sharing signal reports on JT65.

The simplest application for FSQCall is that it provides a ‘watering hole’ for a group of friends who wish to keep in touch and chat occasionally. Experience has shown that leaving your equipment running on 7105 kHz during the day, and 3580 kHz at night, will provide fairly reliable communications over about a 500 – 1000 km range. Depending on propagation, 40m may well work day and night. Only modest power is required. You can leave a message for your friend if they aren’t available, and even use one friend to relay a message to another. The software will tell you who is currently available.

I’m going to play with the message store/forward functionality next. If you didn’t see the QST article, you can read more  from ZL1BPU. Or, take a look at this video:

Space Weather. The Sun-Earth Connection. Ionospheric radio propagation. Solar storms. Coronal Mass Ejections (CMEs). Solar flares and radio blackouts. All of these topics are interrelated for the amateur radio operator, especially when the activity involves the shortwave, or high-frequency, radiowave spectrum.

Learning about space weather and radio signal propagation via the ionosphere aids you in gaining a competitive edge in radio DX contests. Want to forecast the radio propagation for the next weekend so you know whether or not you should attend to the Honey-do list, or declare a radio day?

In the last ten years, amazing technological advances have been made in heliophysics research and solar observation. These advances have catapulted the amateur radio hobbyist into a new era in which computer power and easy access to huge amounts of data assist in learning about, observing, and forecasting space weather and to gain an understanding of how space weather impacts shortwave radio propagation, aurora propagation, and so on.

I hope to start “blogging” here about space weather and the propagation of radio waves, as time allows. I hope this finds a place in your journey of exploring the Sun-Earth connection and the science of radio communication.

With that in mind, I’d like to share some pretty cool science. Even though the video material in this article are from 2010, they provide a view of our Sun with the stunning solar tsunami event:

On August 1, 2010, the entire Earth-facing side of the sun erupted in a tumult of activity. There was a C3-class solar flare, a solar tsunami, multiple plasma-filled filaments of magnetism lifting off the stellar surface, large-scale shaking of the solar corona, radio bursts, a coronal mass ejection and more!

At approximately 0855 UTC on August 1, 2010, a C3.2 magnitude soft X-ray flare erupted from NOAA Active Sunspot Region 11092 (we typically shorten this by dropping the first digit: NOAA AR 1092).

At nearly the same time, a massive filament eruption occurred. Prior to the filament’s eruption, NASA’s Solar Dynamics Observatory (SDO) AIA instruments revealed an enormous plasma filament stretching across the sun’s northern hemisphere. When the solar shock wave triggered by the C3.2-class X-ray explosion plowed through this filament, it caused the filament to erupt, sending out a huge plasma cloud.

In this movie, taken by SDO AIA at several different Extreme Ultra Violet (EUV) wavelengths such as the 304- and 171-Angstrom wavelengths, a cooler shock wave can be seen emerging from the origin of the X-ray flare and sweeping across the Sun’s northern hemisphere into the filament field. The impact of this shock wave may propelled the filament into space.

This movie seems to support this analysis: Despite the approximately 400,000 kilometer distance between the flare and the filament eruption, they appear to erupt together. How can this be? Most likely they’re connected by long-range magnetic fields (remember: we cannot see these magnetic field lines unless there is plasma riding these fields).

In the following video clip, taken by SDO AIA at the 304-Angstrom wavelength, a cooler shock wave can be seen emerging from the origin of the X-ray flare and sweeping across the sun’s northern hemisphere into the filament field. The impact of this shock wave propelled the filament into space. This is in black and white because we’re capturing the EUV at the 304-Angstrom wavelength, which we cannot see. SDO does add artificial color to these images, but the raw footage is in this non-colorized view.

The followling video shows this event in the 171-Angstrom wavelength, and highlights more of the flare event:

The following related video shows the “resulting” shock wave several days later. Note that this did NOT result in anything more than a bit of aurora seen by folks living in high-latitude areas (like Norway, for instance).

This fourth video sequence (of the five in the first video shown in this article) shows a simulation model of real-time passage of the solar wind. In this segment, the plasma cloud that was ejected from this solar tsunami event is seen in the data and simulation, passing by Earth and impacting the magnetosphere. This results in the disturbance of the geomagnetic field, triggering aurora and ionospheric depressions that degrade shortwave radio wave propagation.

At about 2/3rd of the way through, UTC time stamp 1651 UTC, the shock wave hits the magnetosphere.

This is a simulation derived from satellite data of the interaction between the solar wind, the earth’s magnetosphere, and earth’s ionosphere. This triggered aurora on August 4, 2010, as the geomagnetic field became stormy (Kp was at or above 5).

While this is an amazing event, a complex series of eruptions involving most of the visible surface of the sun occurred, ejecting plasma toward the Earth, the energy that was transferred by the plasma mass that was ejected by the two eruptions (first, the slower-moving coronal mass ejection originating in the C-class X-ray flare at sunspot region 1092, and, second, the faster-moving plasma ejection originating in the filament eruption) was “moderate.” This event, especially in relationship with the Earth through the Sun-Earth connection, was rather low in energy. It did not result in any news-worthy events on Earth–no laptops were fried, no power grids failed, and the geomagnetic activity level was only moderate, with limited degradation observed on the shortwave radio spectrum.

This “Solar Tsunami” is actually categorized as a “Moreton wave”, the chromospheric signature of a large-scale solar coronal shock wave. As can be seen in this video, they are generated by solar flares. They are named for American astronomer, Gail Moreton, an observer at the Lockheed Solar Observatory in Burbank who spotted them in 1959. He discovered them in time-lapse photography of the chromosphere in the light of the Balmer alpha transition.

Moreton waves propagate at a speed of 250 to 1500 km/s (kilometers per second). A solar scientist, Yutaka Uchida, has interpreted Moreton waves as MHD fast-mode shock waves propagating in the corona. He links them to type II radio bursts, which are radio-wave discharges created when coronal mass ejections accelerate shocks.

I will be posting more of these kinds of posts, some of them explaining the interaction between space weather and the propagation of radio signals.

For live space weather and radio propagation, visit http://SunSpotWatch.com/. Be sure to subscribe to my YouTube channel: https://YouTube.com/NW7US.

The fourth video segment is used by written permission, granted to NW7US by NICT. The movie is copyright@NICT, Japan. The rest of the video is courtesy of SDO/AIA and NASA. Music is courtesy of YouTube, from their free-to-use music library. Video copyright, 2015, by Tomas Hood / NW7US. All rights reserved.

Watch this video on a large screen. (It is HD). Discuss. Share.

This video features stunning clips of the Sun, captured by SDO from each of the five years since SDO’s deployment in 2010. In this movie, watch giant clouds of solar material hurled out into space, the dance of giant loops hovering in the corona, and huge sunspots growing and shrinking on the Sun’s surface.

April 21, 2015 marks the five-year anniversary of the Solar Dynamics Observatory (SDO) First Light press conference, where NASA revealed the first images taken by the spacecraft. Since then, SDO has captured amazingly stunning super-high-definition images in multiple wavelengths, revealing new science, and captivating views.

February 11, 2015 marks five years in space for NASA’s Solar Dynamics Observatory, which provides incredibly detailed images of the whole Sun 24 hours a day. February 11, 2010, was the day on which NASA launched an unprecedented solar observatory into space. The Solar Dynamics Observatory (SDO) flew up on an Atlas V rocket, carrying instruments that scientists hoped would revolutionize observations of the Sun.

Capturing an image more than once per second, SDO has provided an unprecedentedly clear picture of how massive explosions on the Sun grow and erupt. The imagery is also captivating, allowing one to watch the constant ballet of solar material through the sun’s atmosphere, the corona.

The imagery in this “highlight reel” provide us with examples of the kind of data that SDO provides to scientists. By watching the sun in different wavelengths (and therefore different temperatures, each “seen” at a particular wavelength that is invisible to the unaided eye) scientists can watch how material courses through the corona. SDO captures images of the Sun in 10 different wavelengths, each of which helps highlight a different temperature of solar material. Different temperatures can, in turn, show specific structures on the Sun such as solar flares or coronal loops, and help reveal what causes eruptions on the Sun, what heats the Sun’s atmosphere up to 1,000 times hotter than its surface, and why the Sun’s magnetic fields are constantly on the move.

Coronal loops are streams of solar material traveling up and down looping magnetic field lines). Solar flares are bursts of light, energy and X-rays. They can occur by themselves or can be accompanied by what’s called a coronal mass ejection, or CME, in which a giant cloud of solar material erupts off the Sun, achieves escape velocity and heads off into space.

This movie shows examples of x-ray flares, coronal mass ejections, prominence eruptions when masses of solar material leap off the Sun, much like CMEs. The movie also shows sunspot groups on the solar surface. One of these sunspot groups, a magnetically strong and complex region appearing in mid-January 2014, was one of the largest in nine years as well as a torrent of intense solar flares. In this case, the Sun produced only flares and no CMEs, which, while not unheard of, is somewhat unusual for flares of that size. Scientists are looking at that data now to see if they can determine what circumstances might have led to flares eruptions alone.

Scientists study these images to better understand the complex electromagnetic system causing the constant movement on the sun, which can ultimately have an effect closer to Earth, too: Flares and another type of solar explosion called coronal mass ejections can sometimes disrupt technology in space as well as on Earth (disrupting shortwave communication, stressing power grids, and more). Additionally, studying our closest star is one way of learning about other stars in the galaxy.

Goddard built, operates and manages the SDO spacecraft for NASA’s Science Mission Directorate in Washington, D.C. SDO is the first mission of NASA’s Living with a Star Program. The program’s goal is to develop the scientific understanding necessary to address those aspects of the sun-Earth system that directly affect our lives and society.

https://www.youtube.com/watch?v=zXN-MdoGM9g

Watch this amazing explosion on the Sun. From sunspot complex 1226-1227 comes an X-ray Flare peaking at a magnitude of M2.5 at 0640 UTC on 7 June, 2011.

Source: https://www.youtube.com/watch?v=KQMrRu8BWDo

This X-ray flare hurled a massive coronal mass ejection (CME) toward the Earth. This not-squarely Earth-directed CME is moving at 1400 km/s according to NASA models. The CME did not deliver even a noticeable glancing blow to Earth’s magnetic field late June 8th or June 9th.

What can be seen clearly in this movie is one of the most spectacular prominence eruptions ever observed. In fact, one could call it a “prominence explosion”. The prominence material expanded to a volume some 75 times as big across as the earth!

This X-ray flare also triggered an S1-level solar radiation storm, causing a long-lasting polar cap absorption (PCA) event. A polar cap absorption (PCA) event affects the propagation of a shortwave radio signal as it makes its way over the polar regions. In short, radio communications on lower shortwave radio frequencies become more difficult, as those radio signals are absorbed by the ionosphere (in the D-region) over the polar regions.

What does this mean in real-world communications? Trans-polar airline pilots may find it more difficult to communicate with regional air traffic control, shortwave radio listeners who want to hear a broadcast from a country by receiving a transmission from a country by way of a transmission beamed over the pole (like, from Europe into the USA via the North Pole), or other such communications, will find those signals all but gone. The stronger the PCA event, the higher the frequencies absorbed over the polar regions, with the greatest absorption occurring at the lower frequencies.

This movie spans the period of time from 0300 UTC through 1556 UTC, and is composed of the 171-Angstrom, 304-Angstrom, and 335-Angstrom wavelength views as captured by the filters of the Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA). In this movie, the AIA instruments capture the Sun’s extreme ultraviolet light and reveal a very large eruption of cool gas. It is somewhat unique because at many places in the eruption there seems to be even cooler material–at temperatures less than 80,000 K.

The following is a linked video that is part of this event: http://www.youtube.com/watch?v=L4CsjcUGoaw

Watch as we zoom out to see a total view of the June 7, 2011 moderately-powerful X-ray Flare and Prominence Eruption. This movie will give you a full perspective of the immense size of this prominence eruption as it spews out away from the Sun.

The X-ray Flare peaked at a moderate magnitude of M2.5 at 0640 UTC, but unleashed a huge prominence eruption. The massive cloud of plasma was ejected out into interplanetary space, but missed the Earth. This movie stars with a “close-up” view by the Solar Dynamics Observatory at a combined wavelength view at 94 and 304 Angstroms. Then, the movie views the event further back through the eyes of the COR1 spacecraft (with the SDO AIA 304 image superimposed in the middle). Next, we zoom out to the COR2 spacecraft and superimpose the COR1 and SDO views. Then, we zoom further back to the H1 view… and finally look again at the event close-up.

More info: http://sunspotwatch.com/

Google Plus:

http://g.nw7us.us/gplus_spacewx

Facebook:

http://www.facebook.com/spacewx.hfradio
http://www.facebook.com/NW7US

Twitter:
@hfradiospacewx
@NW7US

Source: SDO AIA NASA SOHO

Are you really in control of your transmitter? I visited another radio club last night. It was interesting to hear the discussion about two new repeater projects the club is working on, including swapping the RF and control decks out with Yaesu’s Fusion offer. I could write a book on the pros and cons of the Fusion offer…today’s post isn’t about that.

What was interesting to me is that the club wasn’t concerned that they wouldn’t have remote control of their repeater transmitters the way that they do today. They are planning on running the repeaters in analog mode for output, and maybe dual mode for input. The comment that stuck with me is that they didn’t see any need for the repeater controllers they have today. The ability to make remote changes to the configuration, or to be able to shut the system down (and turn it back on) were not of interest to any of the members.

I’ve only run repeaters for a couple of years now. It has been quite the adventure. During that time, I had a cheap controller go belly up in such a way that it held the transmitter keyed down. The transmitter would overheat, shut off, cool off, then key down. Rinse and repeat. Over and over. The controller wouldn’t respond to any commands. It was a week before I could get to the site to replace the defective board. Since then, I’ve got a remote controlled power strip like we use in corporate data centers that allows me to power cycle equipment over the internet.

The thought of putting a repeater on the air without being in positive control is crazy. Sure, it’s very unlikely that the FCC is going to find you and fine you. That’s not the point…is it good practice to throw a system on the air that you can’t control? There are plenty of great solutions here that can be used. Put a second radio with a dtmf decoder on receive side of cans that controls the power. Use the internet and a $50 remote control power strip. Whatever solution you choose, please do something!

In this club’s case, the repeater guys are all retired and have easy walk-in access to the sites. In my case, the three repeaters I work on all required coordinated access, can’t be reached without taking man lifts or elevators, and two can only be accessed during my work day. Remote control – and positive control of the transmitters – is extremely important.

Are you really in control of your transmitter? I visited another radio club last night. It was interesting to hear the discussion about two new repeater projects the club is working on, including swapping the RF and control decks out with Yaesu’s Fusion offer. I could write a book on the pros and cons of the Fusion offer…today’s post isn’t about that.

What was interesting to me is that the club wasn’t concerned that they wouldn’t have remote control of their repeater transmitters the way that they do today. They are planning on running the repeaters in analog mode for output, and maybe dual mode for input. The comment that stuck with me is that they didn’t see any need for the repeater controllers they have today. The ability to make remote changes to the configuration, or to be able to shut the system down (and turn it back on) were not of interest to any of the members.

I’ve only run repeaters for a couple of years now. It has been quite the adventure. During that time, I had a cheap controller go belly up in such a way that it held the transmitter keyed down. The transmitter would overheat, shut off, cool off, then key down. Rinse and repeat. Over and over. The controller wouldn’t respond to any commands. It was a week before I could get to the site to replace the defective board. Since then, I’ve got a remote controlled power strip like we use in corporate data centers that allows me to power cycle equipment over the internet.

The thought of putting a repeater on the air without being in positive control is crazy. Sure, it’s very unlikely that the FCC is going to find you and fine you. That’s not the point…is it good practice to throw a system on the air that you can’t control? There are plenty of great solutions here that can be used. Put a second radio with a dtmf decoder on receive side of cans that controls the power. Use the internet and a $50 remote control power strip. Whatever solution you choose, please do something!

In this club’s case, the repeater guys are all retired and have easy walk-in access to the sites. In my case, the three repeaters I work on all required coordinated access, can’t be reached without taking man lifts or elevators, and two can only be accessed during my work day. Remote control – and positive control of the transmitters – is extremely important.