AmateurRadio.com

I got a Skype call a few weeks ago from Eric, 4Z1UG–the creator and host of the QSO Today Podcast–during which he asked me about how and why I got into amateur radio.  Here’s the result.

Eric writes,

We talk a lot about the band conditions due to the Sunspot cycle. Most of it on Facebook and other places is about how “dead” the bands are at this point. We all can’t wait until the cycle starts to rise and we will be making contacts with little effort. I remember in my conversation with Chuck Adams, K7QO in Episode 58, that he really enjoys operating is “Pigrig”, one watt, CW transceiver on 20 meters. When I asked him, (I liberally paraphrase) “but Chuck, the bands are dead. How does that work for you?”. His reply was that while most hams are listening to the bands, he calls CQ until he gets a reply. Works every time.

My QSO this week is with Tomas Hood, NW7US, who has years of expertise in propagation and Solar activity. He is the propagation editor of more than a few radio magazines and websites. In our post-recording conversation we discussed this phenomenon of listening and not calling CQ. I even had this idea that maybe one of the reasons that the digital modes are so successful is because they “beacon”, as part of the whole digital experience, the same as calling CQ. This is why they make contacts. From what I see, looking at PSK Reporter, hams are making lots of contacts worldwide using the digital modes. While SSB may not be working so well, CW and the digital modes seem to work fine.

I like to work on my bench or make the podcast while listening to the bands. Jeff Damm, WA7MLH, in Episode 177, says that he will put his keyer in CQ mode while he is working on a new radio. Invariably, sometimes after many minutes, he gets a reply. Great idea Jeff!

73,

Eric, 4Z1UG

Episode 184 can be found here: https://www.qsotoday.com/podcasts/nw7us

Highlights of Episode 184:

Tomas Hood, NW7US is the propagation editor of a number of shortwave and amateur radio magazines, and has a wide variety of websites, that grew out of his love for all things radio, and for listening on the bands to far off DX and commercial broadcast stations. Tomas shares his understanding of propagation and the lessons we can learn from listening, really listening to the QSOs and exchanges during contest operation.

All of the QSO Today episodes are great.  I enjoy hearing about many different hams.  Do check out all of the episodes that Eric has published.

73 de NW7US dit dit

Hello everybody! In this episode of the Everything Ham Radio Podcast, I am stuck by myself talk to yall. I unfortunately didn’t remember that I my next scheduled update was due until 4pm the day before. So I worked all afternoon, while at work, trying to figure out what I was going to talk about. When I got off work at midnight, I ran home and did my couple honey-dos and then went straight to recording the episode.

So what is in this episode?

First off, I made a mistake! Yea, I know, nobody is suppose to make mistakes right? Well, in my last episode I did. In last episode, my semi regular co-host Ian KM4IK and were talking about the big stink that was doing on with some things that the ARRL Board of Directors were going to be voting on. Neither one of us were really up to speed on the whole thing as much as we should be, but we did our best, and we even said that we weren’t. However, after the episode I did receive multiple emails saying that I said something wrong, so I corrected it in this episode.

With that out of the way, I went on to talk about an upcoming event called the School Club Roundup. It is this month only a few days away actually. The event run February 12-16, 2018. It is an event that is geared for school amateur radio clubs to get on the air and make some contacts. Even if you are not in a school club though you can still get on the air and make contact with the school clubs that are on the air and help them make the points.

After that, I moved on to Hamvention. Another correction from last episode. Well I say correction, this time it wasn’t me though. In last episode we talked about how a new building was going to be built and available by this Hamvention. However, this week, the Hamvention committee released that it wouldn’t be started on until later in the year due to a material shortage.

I wrap up the episode reading some emails that I have received over the past few weeks. The last episode of 2017, I told yall what my plans were for 2018 and asked what some of yalls were and also asked some questions about what were yalls opinions on how my show is. I got a few responses, wish I would’ve had more though.

Until Next Time Yall…

73 de Curtis, K5CLM

What got you interested in radio? What hooked you?

I’ve been asked, “What got you interested in radio, space weather, and the science of radio-wave propagation?”

Here’s a short answer as to why (and when) I became a radio enthusiast. It all started…

[embedyt] https://www.youtube.com/watch?v=0XBth62JgwA[/embedyt]

https://www.youtube.com/watch?v=0XBth62JgwA

The following picture is of my first shortwave radio, discovered in my home sometime between 1971 and 1973: a Sony portable transistorized four-band radio receiver. This was my very first shortwave radio (well, truthfully, it was my dad’s). This radio is responsible for my love of radio, electronics, and communications.

Sony Portable 4-Band Radio – the model 7F-74DL (my First Radio)

I still use this, sometimes, when listening to late-night AM-broadcast-band-radio DX. It is horrible for shortwave radio listening, as it has no noise blanker. For MW (Medium-wave) AM Broadcast DXing at night, it is excellent. The internal bar antenna is very directional so I can rotate the radio around until I get the best reception of some station. Back when I was a child, that made the radio very fun to use.

This next radio is a really capable military surplus radio circa WWII or shortly after (the late 1940s, early 1950s). This radio was my world starting around 1975. From Medium-wave to Shortwave, this radio could hear a pin drop around the world! Many late nights when I was supposed to be sleeping, I was up with the light dimmed and the tubes singing signals from exotic places.

Espey R366 Tube Receiver (my Second Radio)

What is your story?73 de NW7US

Addendum:
https://www.youtube.com/watch?v=y8bBM9Dy38o

[embedyt] https://www.youtube.com/watch?v=y8bBM9Dy38o[/embedyt]

The following open letter to the ARRL Board of Directors and Leadership is in concert with many others coming from current members in response to the activities occurring at the ARRL Leadership level.

To join in and voice your thoughts, please visit:

(More information is found after the following open letter)

To: All ARRL Directors and Officers

From: NW7US

Many actions–policy and governance–taken by the League’s leadership over the past two years trouble me. Formalization of specific actions planned for the Board meeting on January 19, 2018, specifically worries me.

At this time, any action taken by the ARRL Board of Directors cause me concern. As a result of this, I add my name to those seeking that the Board delay consideration of any ByLaw changes at the January 19 Board meeting.

In particular, I strongly urge you to:

1. Reject any proposal to allow the President and individual Vice-Presidents to vote as Directors.

2. Reject any provision that allows expulsion of an ARRL member “for cause” without delineated criteria.

3. Reject any provision that allows expulsion of any Director, Vice-Director of Officer for bringing ARRL into “disrepute” without specific criteria.

4. Reject any provision that reduces Members’ ability to recall a sitting Director.

5. Reject any current or proposed provision that allows the Board to disqualify candidates for elected office without full disclosure of the reasons for such disqualification.

6. Reject any proposal that would allow the Board to designate replacements for Directors instead of appointing an elected Vice Director or other elective processes.

7. Reject any current or proposed provision that allows censure, removal or other disciplines of a Director for revealing or openly discussing any view expressed at a Board meeting that is not consistent with the Board’s action.

8. Adopt a policy that elected Directors, and Vice Directors are not “personnel” for the purposes of declaring that any information about removal or disqualification is confidential and may not be released.

It is crucial that ARRL remain a solidly democratic, membership-based organization with principles of openness and accessibility through our elected Directors. I urge you to vote per my wishes at the January 19 meeting.

Beyond these issues of governance, I am concerned about the policy-making process of the ARRL leadership–leadership that I feel has become much less Member-driven, and that no longer reflects the needs of the Membership.

Ham radio is in a time of transition. The ARRL must focus on the issues that make a difference for the future success of the hobby.

73, Tomas Hood / NW7US

More information about this effort:

myARRLvoice is an independent grassroots group of amateur radio operators working on behalf of our fellow Members of the American Radio Relay League (ARRL), monitoring the activity of its leadership and advocating change to optimize the organization’s effectiveness in matters of policy and governance, and to foster ethical and competent stewardship.

myARRLvoice acts as a vehicle for ARRL Members to make their voices heard on matters of governance and policy, and to participate in the policy-setting process, holding our elected and appointed leaders accountable. We strive to make the activities of ARRL leadership more transparent by insisting on the creation and dissemination of records of the deliberations and actions of all ARRL Boards, Committees, and the operational Executive Team.

myARRLvoice believes that good ARRL stewardship can only be achieved through a check and balance system that includes the watchful eye of the Membership.

Visit the website at www.myarrlvoice.org

RIP David Collingham, SK – K3LP is now SK.

My condolences to the family and friends, and to our radio community, for the tragic loss of David Collingham, K3LP.

I am sad and sorry for his loved ones and friends who now grieve this loss.

May his memory echo through the ether like radio waves, reaching the receivers of our hearts.

Passing along a note from Paul, N6PSE:

Dear Friends of David Collingham-K3LP:

I have learned additional information concerning his death.

Last night, during a heavy winter storm, David let his dog outside. David later took his truck to search his 25-acre property when his dog did not return. David found that his dog had fallen into an icy pond that adjoins his property with another property.

David made the heroic decision to go into the pond to try and save his dog.

After some time had passed, David’s wife Rebecca went looking for him. She found his truck at the pond and called 911. Fire personal recovered David’s body as well as his dog. Efforts to resuscitate him were unsuccessful.

David lived his life bold, courageous and heroically and he died trying to save his beloved dog. He will always be a hero in our hearts.

RIP David R. Collingham, age 59.

Are you interested in starting out with the amateur-radio digital modes on the high frequencies? Have you heard of FLDigi? FLDigi is a software control and modem suite that interfaces with your transceiver, your computer sound card, and other input/output interfaces so that you can receive and transmit one of many digital modes. For example, FLDigi allows you to operate using the Olivia digital mode.

Demonstration: Using FLDigi to Communicate with Olivia Digital Mode on Shortwave

Unlike the JT/FT digital modes–modes that do an incredible job under marginal propagation conditions–there are other modes that offer keyboard-to-keyboard conversational QSO opportunities that can overcome rough shortwave radio propagation conditions. (The meaning of QSO on Wikipedia: An amateur radio contact, more commonly referred to as simply a “contact”, is an exchange of information between two amateur radio stations.)

While making quick work of getting DX stations into your logbook by exchanging callsigns, a signal report, and a grid square, the JT/FT modes (JT stands for Joe Taylor, the fellow that pioneered these modes) are limited. They cannot handle any additional communications beyond a callsign, a signal report, a grid square, and a very limited set of acknowledgments and sign-off messages.

When you desire to get to know people from other areas of the world, or if you need to establish networks around the world for passing information–perhaps an emergency net in support of the Red Cross–or if you are motivated by any other of a myriad reasons to establish a keyboard-to-keyboard conversation by way of the ionosphere, modes like Olivia are great candidates for your consideration.

In this video, contributing editor with CQ Amateur Radio Magazine, NW7US shares some starting points in the FLDigi software for Olivia keyboard-to-keyboard chat mode.

[embedyt] https://www.youtube.com/watch?v=ejSNfXiT8FE[/embedyt]

Current CENTER Frequencies With 8/250 in MHz:

1.8269, 3.5729, 7.0729, 10.1429, 14.0729, 18.1029, 21.0729, 24.9229, 28.1229, and so on. See the pattern?

By the way: The current suggested CENTER frequency With 16/1000 or 32/1000 on 20 meters is 14.1059.

(Why the …9 frequencies? Experts say that ending in a non-zero, odd number is easier to remember!)

Q: What’s a ‘CENTER’ Frequency? Is That Where I Set My Radio’s Dial?

For those new to waterfalls: the CENTER frequency is the CENTER of the cursor shown by common software. The cursor is what you use to set the transceiver’s frequency on the waterfall. If your software’s waterfall shows the frequency, then you simply place the cursor so that its center is right on the center frequency listed, above. If your software is set to show OFFSET, then you might, for example, set your radio’s dial frequency to 14.0714, and place the center of your waterfall cursor to 1500 (1500 Hz). That would translate to the 14.0729 CENTER frequency.

The FLDigi Manual of Operation is found here: http://www.w1hkj.com/FldigiHelp/

FLDigi can be downloaded here: https://sourceforge.net/projects/fldigi/

Join the Olivia movement:

1. Subscribe to the mailing list: https://Groups.io/g/Olivia

2. Join the Facebook group: https://www.facebook.com/groups/olivia.hf

For additional information on Olivia, check out:

http://blog.nw7us.us/post/168515010062/olivia-digital-mode-great-compromise

http://blog.nw7us.us/post/169114702522/are-you-an-amateur-ham-radio-operator-check-out

73 de NW7US

Some HF digital modes were designed for long-distance (DX) radio-wave propagation via the ionosphere. One such keyboard-to-keyboard digital mode is Olivia.

Friday evening, 8 December 2017, at 0200 UTC {9-DEC}, Larry, N7ZDR, called an Olivia-mode 80-Meter digital roundtable net. The following video is a snapshot of about nine minutes of on-air net operations as received at my location in Omaha, Nebraska.  My antenna is a wire run from an SEA marine autotuner mounted under the three-story-high roof’s eaves.  I live in a high-RF environment within two miles of eight high-powered broadcast antenna facilities–TV, FM, AM–as well as business and public-service transmitters.   All that RF desensitizes my receiver.  The noise floor is also affected by industrial-level man-made RF noise.

No, Olivia is not lightening-fast keyboard-to-keyboard chatting, but it can get the job done. This following video shows some real-world operation in which the very weakest signals did not decode well. However, even with the 80-Meter band (center frequency is 3585 kHz) really difficult to work with, it did well in terms of what was available for the Ham Radio Deluxe DM780 software to decode.

Example QSO in Olivia Video:

[embedyt]https://www.youtube.com/watch?v=G7TlGEuStx4[/embedyt]

In 2005, SP9VRC, Pawel Jalocha, released to the world a mode that he developed starting in 2003 to overcome difficult radio signal propagation conditions on the shortwave (high-frequency, or HF) bands. By difficult, we are talking significant phase distortions and low signal-to-noise ratios (SNR) plus multipath propagation effects. The Olivia-modulated radio signals are decoded even when it is ten to fourteen dB below the noise floor. That means that Olivia is decoded when the amplitude of the noise is slightly over three times that of the digital signal!

Olivia decodes well under other conditions that are a complex mix of atmospheric noise, signal fading (QSB), interference (QRM), polar flutter caused by a radio signal traversing a polar path. Olivia is even capable when the signal is affected by auroral conditions (including the Sporadic-E Auroral Mode, where signals are refracted off of the highly-energized E-region in which the Aurora is active).

Currently, the only other digital modes that match or exceed Olivia in their sensitivity are some of the modes designed by Joe Taylor as implemented in the WSJT programs, including FT8, JT65A, and JT65-HF–each of which are certainly limited in usage and definitely not able to provide true conversation capabilities.  Olivia is useful for emergency communications, unlike JT65A or the newly popular FT8. One other mode is better than Olivia for keyboard-to-keyboard comms under difficult conditions: MT63. Yet, Olivia is a good compromise that delivers a lot.

Join us — not just on the HF waterfall, but by joining our email-based group at:

–> https://Groups.Io/g/olivia

or, on Facebook at:

–> https://www.facebook.com/groups/olivia.hf

Thanks for spreading the Olivia love!  See you on the waterfall.

Addendum: 

Current CENTER Frequencies With 8/250 (eight tones, 250-Hz bandwidth): 

1.8269 MHz
3.5729 MHz
7.0729 MHz
10.1429 MHz
14.0729 MHz
18.1029 MHz
21.0729 MHz
24.9229 MHz
28.1229 MHz

See the pattern?

The current suggested CENTER frequency with 16/1000 or 32/1000 on 20 meters is 14.1059.

(Why the xxx…9 frequencies? Experts say that ending in a non-zero odd number is easier to remember!)

Q: What’s a ‘CENTER’ Frequency? Is That Where I Set My Radio’s Dial?

For those new to waterfalls: the CENTER frequency is the CENTER of the cursor shown by common software. The cursor is what you use to set the transceiver’s frequency on the waterfall. If your software’s waterfall shows the frequency, then you simply place the cursor so that its center is right on the center frequency listed, above. If your software is set to show OFFSET, then you might, for example, set your radio’s dial frequency to 14.0714, and place the center of your waterfall cursor to 1500 (1500 Hz). That would translate to the 14.0729 CENTER frequency.

The standard Olivia formats (shown as the number of tones/bandwidth in Hz) are 8/250, 8/500, 16/500, 8/1000, 16/1000, and 32/1000. Some even use 16/2000 for series emergency communication. The most commonly-used formats are 16/500, 8/500, and 8/250. However, the 32/1000 and 16/1000 configurations are popular in some areas of the world (Europe) and on certain bands.

These different choices in bandwidth and tone settings can cause some confusion and problems–so many formats and so many other digital modes can make it difficult to figure out which mode you are seeing and hearing. After getting used to the sound and look of Olivia in the waterfall, though, it becomes easier to identify the format when you encounter it. To aid in your detection of what mode is being used, there is a feature of many digital-mode software implementation suites: the RSID. The next video, below, is a demonstration on how to set the Reed-Solomon Identification (RSID) feature in Ham Radio Deluxe’s Digital Master 780 module (HRD DM780).

I encourage ALL operators, using any digital mode such as Olivia, to TURN ON the RSID feature as shown in this example. In Fldigi, the RSID is the TXID and RXID; make sure to Check (turn on) each, the TXID and RXID.

Please, make sure you are using the RSID (Reed Solomon Identification – RSID or TXID, RXID) option in your software. RSID transmits a short burst at the start of your transmission which identifies the mode you are using. When it does that, those amateur radio operators also using RSID while listening will be alerted by their software that you are transmitting in the specific mode (Olivia, hopefully), the settings (like 8/250), and where on the waterfall your transmission is located. This might be a popup window and/or text on the receive text panel. When the operator clicks on that, the software moves the waterfall cursor right on top of the signal and changes the mode in the software. This will help you make more contacts!

RSID Setting:

[embedyt]https://www.youtube.com/watch?v=lBIacwD9nNM[/embedyt]

+ NOTE 1: The MixW software doesn’t have RSID features. Request it!

+ NOTE 2: A problem exists in the current paid version of HRD’s DM780: the DM780 RSID popup box that lists the frequency, mode, and configuration with a link to click, does not work. HRD support is aware of the problem. You can still use the textual version that shows up in the DECODED TEXT window, a feature of RSID that you can select in the HRD DM780 program settings. This setting ensures that the detected RSID details appear in the receive text area. If you click the RSID link that comes across the text area, DM780 will tune to the reported signal, and change to the correct settings.

Voluntary Olivia Channelization 

Since Olivia signals can be decoded even when received signals are extremely weak, (signal to noise ratio of -14db), signals strong enough to be decoded are sometimes below the noise floor and therefore impossible to search for manually. As a result, amateur radio operators have voluntarily decided upon channelization for this mode. This channelization allows even imperceptibly weak signals to be properly tuned for reception and decoding. By common convention amateur stations initiate contacts utilizing 8/250, 16/500, or 32/1000 configuration of the Olivia mode. After negotiating the initial exchange, sometimes one of the operators will suggest switching to other configurations to continue the conversation at more reliable settings, or faster when conditions allow. The following table lists the common center frequencies used in the amateur radio bands.

Olivia (CENTER) Frequencies (kHz) for Calling, Initiating QSOs

It is often best to get on standard calling frequencies with this mode because you can miss a lot of weak signals if you don’t. However, with Olivia activity on the rise AND all the other modes vying for space, a good deal of the time you can operate wherever you can find a clear spot–as close as you can to a standard calling frequency.

Note: some websites publish frequencies in this band, that are right on top of weak-signal JT65, JT9, and FT8 segments. DO NOT QRM weak-signal QSOs!

We (active Olivia community members) suggest 8/250 as the starting settings when calling CQ on the USB frequencies designated as ‘Calling Frequencies.’ A Calling Frequency is a center frequency on which you initially call, ‘CQ CQ CQ. . .’ and then, with the agreement of the answering operator, move to a new nearby frequency, changing the number of tones and bandwidth at your discretion. Even though 8/250 is slow, the CQ call is short. But, it is narrow, to allow room for other QSOs nearby. It is also one of the best possible Olivia configurations for weak-signal decoding.

– End of Addendum –

73