Fixed mode with 20kHz span

I have had my Icom 7610 for several years now and am still very much enjoying it. From time to time I enjoy working DXpeditions and having Dual receivers and dual spectrum scopes with the Icom 7610  is very handy. The spectrum scope has 2 tuning options which are fixed and center modes. It could just be me but I find center mode hard to follow were as fixed mode seems very easy to follow. When you come across a station that is working split more often than not it’s because there is a large pileup and it’s more efficient to work split. For those readers who are not certain what split operation is this LINK explains it better than I can. 

During split operation especially with a very rare DX station, there are LOTS of operators trying to contact the prized DX station. For this reason on the DX’s listening frequency, there are many ops trying to make contact. When you as an operator want to get involved and try to contact the DX station you have to drop yourself in the pool of stations calling the DX station.
The trick is where to set your VFO dial to have a chance to be heard by the DX station. In most cases, the DX station has a routine to move up or down his listening frequency which is your transmit frequency. One must listen and watch the waterfall to see who the DX station is answering call after call. You can then get the idea if he is moving up or down his listening frequency and by how much. 

As I said there could be lots of callers and this translates to a very crowded waterfall display. To find out where to drop your call one must have a closer look at the waterfall. When this is done you can get some separation between the calling stations. Thus allowing you to better see who the DX station is answering. Then you have a good idea when and where to drop your call and hopefully be heard.
As I said the center mode I find very confusing and when I use it in split mode and spin the VFO I am just lost as to who is where and for this reason I use fixed mode. 

As a side note: In center mode when you spin the VFO the signals on the waterfall move and the VFO marker remains stationary. In center mode when the VFO is changed the waterfall signals remain stationary and the VFO marker moves to the next signal.

As was said earlier it is best to have a closer look at the waterfall to see the action. In fixed mode, the smallest slice of the band you can have is 20khz. When operating CW as I do this for me is not enough for a very crowded calling group. In center mode, you can get a slice all the way down to +/- 2.5kHz or +/- 5kHz. For me, these are great options and with CW I generally would choose +/-2.5kHz but the rig has to be in center mode and that just does not work for me.
I have found a workaround so I can use the center mode, select +/-2.5kHz and still have the moving VFO B marker and not a moving waterfall! Below are the setup steps I take to make this happen.

In fixed mode, I find the DX station with VFO A

I then press the Dual-W button

Then press and hold Dual-W button to get the settings for VFO B the same as VFO A

I then press the split button

I press the Dual soft key my scope becomes over-under as this is how it is setup. You can see the dual scope view in the post pictures.

I change both scopes to center mode if not there already.

I now set the span to the same on each lower and upper scope in my case it is +/-2.5kHz I then touch VFO B frequency readout on the upper band scope (to activate VFO B)

Now in the upper band scope, VFO A remains stationary on the DX station. VFO B (in the upper band scope) now moves when the VFO dial is turned. The VFO marker moves (like fixed mode) and the band signals remain stationary.

The lower scope is still there but I don’t pay any attention to it. I found if I did not stay in dual scope mode I would lose the CENTER mode for VFO A and FIXED mode for VFO B. 

5+/-kHz in center mode but VFO acts like fixed mode

Now with all this said I just know there is going to be a comment that informs me I can press 2 simple buttons on the rig and get the same results. I seem to always take the long way around with things. I have added some screen pics of how the waterfall looks when in 20kHz, +/-5kHz and +/-2.5kHz span during a DXpedition. As you can see when in +/-2.5kHz mode the calling station are easy to see compared to fix 20kHz and +/-5kHz selections. But best of all I have fixed mode operation of VFO B with these small spans. 

+/-2.5kHz span view of pile up calling DX station

Stories you’ll find in our November, 2022 issue:

LnR Precision MTR-4B V2 QRP Transceiver
By Thomas Witherspoon K4SWL

This little radio first caught Thomas’ attention at a Four Days in May (FDIM) QRP conference over a decade ago. He writes, “A ham friend in the SOTA community proudly showed me a very early version of the Mountain Topper that he built from a kit. The first thing that struck me was how impossibly small and extraordinarily lightweight it was. But when he showed me the 9-volt battery he used to power it––a power supply not only small, but convenient––I was mesmerized.”

Remote Ham Radio Options: Software and Hardware
By Mark Haverstock K8MSH

We’ve all used remote control for decades to operate TV sets. Mark says, “Remote control operation also works for your ham radio hobby. Maybe you live in RFI hell—places where interference from computers, appliances, plasma TVs, and other consumer electronics wreak havoc on your receiver. Or maybe you’re in a lousy location for working DX, or any station for that matter? Then there’s serious portable operation. Imagine working stations from the great outdoors or from a hotel room.” Mark shows how to use software and hardware to make this happen.

Secrets of the End-Fed Half-Wave Antenna
By Cory GB Sickles WA3UVV

As with anything that becomes popular, a certain mythology has developed about the End-Fed Half-Wave (EFHW) antenna, leading one to believe that it is some sort of miracle antenna, capable of gain, never needing a tuner, operating without any sort of counterpoise and extremely broadband in nature, among other amazing (but incorrect) ‘alternative facts.’ Cory says, “While a properly constructed and erected EFHW can be an effective radiator, your understanding and enjoyment of its overall performance characteristics deserves a closer look.”

2022 SDR Buyer’s Guide
By Larry Van Horn N5FPW

Receive-only SDRs continue to grab a major share of the HF shortwave marketplace. With the popularity of Raspberry PI systems, new manufacturers, primarily from outside the US, are now incorporating SDR technologies with portable handheld receivers. Digital radio, and in particular the Software Defined Radios, or SDRs, have quickly become a reality for many of us in our radio shacks. Larry looks at what’s available for 2022.

2022 Scanner Radio Buyer’s Guide
By Larry Van Horn N5FPW

2022 has shaped up to be familiar territory when it comes to selling scanner radios. Larry explains that chip shortages, labor shortages, supply chain irregularities, China Covid lockdown policies and other woes have resulted in “out of stock” notes from various sellers on popular models. Larry looks at products that are available and explains which might be best for you, where you live.

Scanning America
By Dan Veeneman
Scanning Delaware County (PA)

Federal Wavelengths
By Chris Parris
Hurricane Ian Response

Milcom
By Larry Van Horn N5FPW
Monitoring US Coast Guard Aviation Fleet

Utility Planet
By Hugh Stegman
2022 Hurricane Season on HF

Shortwave Utility Logs
By Mike Chace-Ortiz and Hugh Stegman

The World of Shortwave Listening
By Valter Aguiar
Latin American Radio Report

The Shortwave Listener
By Fred Waterer
Fall Shortwave Schedules

Radio 101
By Ken Reitz KS4ZR
21st Century SWL

Amateur Radio Astronomy
By Stan Nelson KB5VL
The ‘Big Ear’ Radio Telescope’s ‘Wow’ Signal

Adventures in Radio Restoration
By Rich Post KB8TAD
The Fearnola: 1920s TRF Three-Dial Set

Digitally Speaking
By Cory GB Sickles WA3UVV
2022 Amateur Radio Digital Voice Guide

The Spectrum Monitor is available in PDF format which can be read on any desktop, laptop, iPad®, Kindle® Fire, or other device capable of opening a PDF file. Annual subscription is $24. Individual monthly issues are available for $3 each.