Hunting For NDBs In CLE272

 

ML - 392 Charlevoix, Quebec

It's CLE time! 'CLE's are 'Co-ordinated  Listening Events, and NDB DXers around the world focus their listening time on one small slice of  the NDB spectrum.

 
It's another normal one again with a 15kHz window -- the hunting ground is 385.0 - 399.9kHz.

A 'challenge target' for listeners in North America is ML - 392kHz in Charlevoix, Quebec. Listen for ML's upper sideband on 392.404kHz. ML is widely heard in Europe and throughout North America. Its 500W and big tower work well!


When tuning for NDBs, put your receiver in the CW mode and listen for the NDB's CW identifier, repeated every few seconds. Listen for U.S. NDB identifiers approximately 1 kHz higher or lower than the published transmitted frequency since these beacons are modulated with a 1020 Hz tone approximately.

For example, 'AA' near Fargo, ND, transmitted on 365 kHz and its upper sideband CW identifier was tuned at 366.025 kHz while its lower sideband CW ident could be tuned at 363.946 kHz. Its USB tone was actually 1025 Hz while its LSB tone was 1054 Hz.

Often, one sideband will be much stronger than the other so if you don't hear the first one, try listening on the other sideband.

Canadian NDBs normally have an USB tone only, usually very close to 400 Hz. They also have a long dash (keydown) following the CW identifier.

All NDBs heard in North America will be listed in the RNA database (updated daily) while those heard in Europe may be found in the REU database. Beacons heard outside of these regions will be found in the RWW database. These databases have recently been re-vamped and are slicker than ever before!

From CLE organizers comes the following CLE info:

 

Hello all,

 Have you tried one of our Co-ordinated Listening Events yet? 

Whether short logs or long ones, making them is enjoyed by beginners and experts alike - and reading them is enjoyed by all.

 Our 272nd Coordinated Listening Event starts this Friday.  This 15 kHz frequency range is quite a busy one, even the Pacific region (Oceania) having several NDBs to be found.

 

     Days:    Friday 24 Sept. - Monday 27 Sept. 2021

     Times:   Start and end at midday your LOCAL time

     Range:   385 - 399.9 kHz

 

Please log all the NDBs that you can identify with nominal (listed) frequencies in the range - it includes 385 kHz, but not 400 kHz - plus any UNIDs that you come across there.

 Send your final log to the List (not in an attachment, please) with 'CLE272’ and ‘FINAL' in its title (important).

 Show on each line:

    #   The Date (e.g.  '2021-09-24', etc.,  or just '24' )

    #   The Time in UTC (the day changes at 00:00 UTC).

    #   kHz  - the nominal published frequency, if known.

    #   The Call Ident.

 

Please show those main items FIRST.  Other optional details such as Location and Distance go LATER in the same line.

As always, of course, tell us your own location and give brief details of the equipment that you were using during the Event.

 

We will send the usual 'Any More Logs?' email at about 19:00 UTC on Tuesday so you can check that your log has been found OK.

Do make sure that your log has arrived on the List by 08:00 UTC on Wednesday 29 Sept. at the very latest.

We hope to complete making the combined results within a day or two.

You can find full details about current and past CLEs from the CLE page http://www.ndblist.info/cle.htm    It includes access to the CLE272 seeklists for your part of the World, prepared from all the previous loggings in Rxx.

 

Good listening

- enjoy the CLE.

     Brian and Joachim

------------------------------------------------------------------

From:      Brian Keyte G3SIA      ndbcle'at'gmail.com

Location:  Surrey,  SE England     (CLE coordinator)

------------------------------------------------------------------

  (If you would like to listen remotely you could use any one remote

  receiver for your loggings, stating its location and owner and with

  their permission if required.  A remote listener may NOT also use

  another receiver, local or remote, to make further loggings for the

  same CLE)

 

These listening events serve several purposes. They

• determine, worldwide, which beacons are actually in service and on-the-air so the newly-re-vamped Rxx online database can be kept up-to-date

• determine, worldwide, which beacons are out-of-service or have gone silent since the last CLE covering this range


• will indicate the state of propagation conditions at the various participant locations


• will give you an indication of how well your LF/MF receiving system is working


• give participants a fun yet challenging activity to keep their listening skills honed


Final details can be found at the NDB List website, and worldwide results, for every participant, will be posted there a few days after the event.


The NDB List Group is a great place to learn more about the 'Art of NDB DXing' or to meet other DXers in your region. There is a lot of good information available there and new members are always very welcome. As well, you can follow the results of other CLE participants from night to night as propagation is always an active topic of discussion.

You need not be an NDB List member to participate in the CLEs and all reports, no matter how small, are of much value to the organizers.

Remember - 'First-time' logs are always VERY welcome!

Reports may be sent to the NDB List Group or e-mailed to CLE co-ordinator, Brian Keyte (G3SIA), whose address appears above. If you are a member of the group, all final results will also be e-mailed and posted there.

Please ... give the CLE a try ... then let us know what NDB's can be heard from your location! Your report can then be added to the worldwide database to help keep it up-to-date.

Have fun and good hunting!

Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

LHS Episode #430: Bag of Hammers

Welcome to the 430th episode of Linux in the Ham Shack. In this action-packed episode, the hosts discuss topics including the JARL Hamfest, AMSAT events going virtual, JOTA and JOTI, vulnerabilities in OpenSSL, updates to the Linux kernel, Pat, Winlink, HAMRS and much more. Thank you for listening and have a great week.

73 de The LHS Crew


Russ Woodman, K5TUX, co-hosts the Linux in the Ham Shack podcast which is available for download in both MP3 and OGG audio format. Contact him at [email protected].

AmateurLogic 160: RN Noise, Huntsville Hamfest & Hurricane Ida


AmateurLogic.TV Episode 160 is now available for download.

George demonstrate RN Noise, free AI noise suppression plug-in. Emile rides out Hurricane Ida while stationed on emergency stand by. Tom Apalenek, WA2IVD joins us to share his first visit to Huntsville Hamfest. AmateurLogic’s 16th Anniversary Contest. Someone is going to win a great Icom IC-705 transceiver package. Details at amateurlogic.tv/contest .

1:21:26

Download
YouTube


George Thomas, W5JDX, is co-host of AmateurLogic.TV, an original amateur radio video program hosted by George Thomas (W5JDX), Tommy Martin (N5ZNO), Peter Berrett (VK3PB), and Emile Diodene (KE5QKR). Contact him at [email protected].

LHS Episode #429: The Weekender LXXVIII

It's time once again for The Weekender. This is our bi-weekly departure into the world of amateur radio contests, open source conventions, special events, listener challenges, hedonism and just plain fun. Thanks for listening and, if you happen to get a chance, feel free to call us or e-mail and send us some feedback. Tell us how we're doing. We'd love to hear from you.

73 de The LHS Crew


Russ Woodman, K5TUX, co-hosts the Linux in the Ham Shack podcast which is available for download in both MP3 and OGG audio format. Contact him at [email protected].

LHS Episode #428: Pat and Winlink Deep Dive

Welcome to the 428th installment of Linux in the Ham Shack. In this episode, the hosts take a deep dive into the Winlink radio-based e-mail system. Discussed are native applications that make Winlink access possible on Linux including Pat, AX.25, Dire Wolf, ARDOP, PACTOR and more. The discussion ranges from how to get the software to how to build it, deploy it, configure it and use it. We hope you enjoy this discussion about Winlink and are able to use and enjoy the system after our in-depth tutorial. Have a great week and see you next time around!

73 de The LHS Crew


Russ Woodman, K5TUX, co-hosts the Linux in the Ham Shack podcast which is available for download in both MP3 and OGG audio format. Contact him at [email protected].

ICQ Podcast Episode 359 – Teaching Ham Radio Classes

In this episode, Martin Butler (M1MRB) is joined by Leslie Butterfield G0CIB, Dan Romanchik KB6NU, Edmund Spicer M0MNG, and Ed Durrant DD5LP to discuss the latest Amateur / Ham Radio news. Colin (M6BOY) rounds up the news in brief and in the episode we feature Teaching Ham Radio Classes.

We would like to thank our monthly and annual subscription donors for keeping the podcast advert free. To donate, please visit - http://www.icqpodcast.com/donate

  • Radio Amateur Told to Remove His Antenna
  • ARRL Board Establishes Program to Cover Initial FCC License Fee for Young Applicants
  • Amateur Radio Fees Reduce
  • Study Shows Contesters are Aging
  • Japanese Amateur Reaches Stricken Boat
  • RSGB Remote Invigilation Figures Soar

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

Sweden from the River with QCX-Mini

Judy and I rode our bikes again today in Old Hill Village. We rode north from Needle Shop Brook and stopped at an outcropping right on the edge of the Pemigewasset River. I worked a station in Sweden.

It was a cool day, 17C and there was a stiff breeze from the north. When we started out it was sprinkling. But this spot was beautiful, and I tossed my half-wave wire over a low maple tree. It wasn’t tall enough to make a vertical, so I used the wire as a sloper. It pointed north which proved to be an advantage.

I was using the tiny QCX-mini on 20 meters. I tuned around a bit and heard an especially strong station, SM5ATP. As he finished up a QSO, I called him.

To my delight, Conny answered right away and asked me to go up two Khz. He was a strong 599 and gave me a 559. I was thrilled. When I told him I was running 3 watts to an end fed wire, he sent: “Amazing Jim… 3W.”

We chatted for a while and I told him I had ridden my bicycle to this spot. “Sounds healthy,” he replied. I promised to send some photos of my operating position by the river. Later I fetched a picture of Conny from his QRZ page.

What a thrill to ride in a wilderness area and make a contact on the other side of the ocean. Thanks Conny! You made the whole trip memorable.


Jim Cluett, W1PID, is a regular contributor to AmateurRadio.com and writes from New Hampshire, USA. Contact him at [email protected].

Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor




Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: