In a previous post, I described getting the IC-705 set up for FT8 using the SDR-Control app on an iPad. My objective was to have a portable FT8 station for use during SOTA and POTA activations.

To save time, let me get this out of the way:

Yes, I do know that making contacts via FT8 is not as personal and may not be as much fun as running a pileup on SSB or CW. Still, it is Real Ham Radio and enjoyable in a different way.

I’ve used this station on multiple activations now but I have to admit that these have been mostly for POTA. It seems that whenever I get on top of a SOTA summit, I tend to focus on making VHF contacts which consumes the available time and the HF gear remains stashed way in my pack. This is more about my operating habits than anything else. Looking at spots though, there is a lot of FT8 on POTA and not nearly as much on SOTA. The SOTA crowd tends to have a lot of traditional CW enthusiasts and maybe POTA has fewer of them. Also, SOTA operating is usually backpack portable so carrying a compute device for FT8 may be considered an unnecessary hassle. POTA stations are often in or near a vehicle, so station size/weight is less of a concern.

For POTA, I make sure my activation is posted at pota.app, indicating the park number I am activating. When calling CQ, I modify the standard FT8 text to be “CQ POTA” to indicate that I am doing an activation. When my signal is detected by the Reverse Beacon Network (RBN), a spot is created that shows me doing a POTA activation from that park. Pretty cool. If I have an internet connection, I monitor my spots using the Ham Alert app. This provides useful feedback about where my signal is showing up around the world.

But what are the main reasons that FT8 is useful for POTA?

FT8 is popular

In case you haven’t noticed, FT8 has emerged from being just a niche activity to now being very popular on most ham bands. At times this can be a problem with the standard FT8 frequency slice being overloaded with signals. There is a lot of FT8 activity on the bands, for general ham use and SOTA/POTA.

FT8 works well with low power

FT8 and the other WSJT-X modes are designed to work well with weak signals, so they are a great match for low-power operation. Of course, QRP power levels are very common for backpack portable activations, mostly due to the limitations of carrying a reasonable-size battery.

FT8 signals are spotted on RBN

As mentioned earlier, FT8 signals are picked up and spotted by RBN. For better or worse, people have come to rely on spotting for many types of ham radio operating. When on a SOTA or POTA activation, you really want to be spotted as such. For phone activations, I usually do that with a smartphone but that requires some extra effort and a mobile phone connection. FT8 and RBN take care of that for you.

FT8 logging is automated

The various FT8 software applications automatically log the QSO information, which means it is easy and less error-prone. After the activation, I just pull up the ADIF log file, check it for obvious errors, add in the SOTA/POTA info, and submit it to the appropriate websites.

FT8 is campsite friendly

This last one may be a bit subtle but I’ve found FT8 to be campsite friendly. By that, I mean I can get on the air at any time (early, late or at nap time) and not disturb anyone else. (On SSB, I would likely be enthusiastically yelling into the microphone trying to work a pileup.) Besides the audio noise factor, FT8 operation allows for multitasking. I can converse with my fellow campers while still keeping up with the FT8 flow. Alternatively, I can cook dinner, make a fire, or pack my backpack while the FT8 QSOs roll in. This may sound a little bit like cheating but, hey, whatever works.

Wrap Up

So clearly, I’ve been having fun with FT8 for POTA. I consider it to be another tool in the toolkit. There are times when I will make good use of it but there will also be times to use other modes.

73 Bob K0NR

The post Why Use FT8 For POTA? appeared first on The KØNR Radio Site.

This past year, Joyce/\K0JJW and I did quite a few Summits On The Air (SOTA) and Parks On The Air (POTA) activations, often as part of an RV camping trip. During this time, we made some improvements to our portable gear. For SOTA, we primarily use the VHF/UHF bands but we have been sprinkling in a bit more HF activity. For POTA, we often don’t have a Height Above Average Terrain advantage, so we definitely use the HF bands.

Our main goal was to have a backpack portable station for SOTA and POTA that can cover HF through 70 cm, on the most popular bands/modes including CW, SSB, FM and FT8.

Using The IC-705

The Icom IC-705 is a great transceiver for covering most HF, VHF and UHF bands. With an external battery, the transceiver puts out 10 watts of RF power. (This is a bit less than the 50 watts from our Yaesu FT-90, which is our default choice for 2m and 70 cm SOTA.) We have accumulated a number of Lithium Iron Phosphate batteries from Bioenno. They are all set up with PowerPole connectors and are easily interchanged. See a previous post, My SOTA Battery Journey.

Arguably the biggest weakness of the IC-705 is the lack of an internal antenna tuner for the HF bands. Of course, you can operate without a tuner by making sure your antenna is always 50 ohms. I find that limiting, especially under portable conditions where the antenna configuration might be compromised. Also, some common end-fed antennas that cover multiple bands are not a good match for all bands. There are external automatic antenna tuners available for the IC-705, so initially those looked like a good solution. Then I remembered that I had a small MFJ-902 Travel Tuner that could do the job. The MFJ-902 is a classic T-network with two variable capacitors and one variable inductor. I gave it a try and was impressed with how easy it was to tune using the SWR meter of the IC-705. This thing is simple and it works.

The rear panel of the tuner has two SO-239 connectors, one for the transceiver and one for the antenna. I put a BNC adapter onto the transceiver port and used a short BNC cable to connect to the IC-705.

The Travel Tuner is compact and not very heavy, so it works out well for backpack portable use. It can handle up to 150 watts, which is overkill for the IC-705 but it may come in handy when used with a higher power transceiver. Still, I am on the lookout for an even more compact (probably lower power) manual antenna tuner.

We have collected a variety of HF antennas, focused mostly on 20 meters and higher. These are typically end-fed, including single-band half-wave designs as well as multiband random-length antennas. These are used in the classic SOTA configuration with one end of the wire supported by a lightweight fishing pole and the coax connection on the ground, fed by a 25-foot length of RG-8X coaxial cable.

FT8 Solution

With the popularity of FT8 on the HF bands as well as 6 meters, I figured we should include that mode in our portable kit. My first thought was to use a compact Windows computer running the standard WSJT-X software. Ultimately, I chose the SDR Control app for the Apple iPad (by Marcus/DL8MRE), which supports specific Icom radios. The iPad connects to the IC-705 via its WiFi connection, which simplifies the connection/cabling challenge. The SDR Control app does cost $49.99, so it is not your inexpensive iOS app but I have found it to be worth the price. Because this app is focused only on iOS and certain Icom radios, it is well-tuned to be a no-fuss solution. I am currently using the app only for FT8 but it has other features and modes for me to explore.

The Powerwerx PWRbox is shown in the photo above, which we often use for operating POTA. (This box is a bit heavy for hiking.) The PWRbox holds a 20 Ah battery as described here. Also shown in the photo is a handy little stand for the IC-705, the NEEWER Folding Z Flex Tilt Head. It does a great job of holding and stabilizing the radio at a variety of angles. (Hat tip to Kyle/KD0TRD.) It is also a little heavy for backpack portable, so it usually gets left behind on a hike.

For a protective case for the IC-705, we use the Maxpedition 12-Inch X 5-Inch Bottle Holder. I’ve seen other IC-705 users recommend it and OH8STN mentioned it on his blog. At first glance, the case seems a bit large but this provides enough room inside to stow a small Bioenno battery and other accessories. The side pouch is a good place for storing the microphone and power cord.

Wrap Up

This post shares some new equipment configurations we are using for SOTA and POTA, mostly focused on the IC-705. I really like that radio for portable ops as it is the best solution for operating HF through UHF. The SDR Control software on an iPad has also turned out to be a win for us.

What are you using for your portable station?
Do you have any tips or other operating ideas?

73 Bob K0NR

The post Improved IC-705 SOTA/POTA station appeared first on The KØNR Radio Site.

Don’t miss out on your chance to win a great Icom IC-705 Portable Transceiver and MFJ accessory package.
Prizes:
• Icom IC-705 HF/50/144/440 MHz Multimode Portable Transceiver
• MFJ-1982LP End Fed 1/2 Wave Antenna
• MFJ-4230MVP 12 volt Power Supply
• MFJ-915 RF Line Isolator
• RG-8X Coax (MFJ)
• MFJ-553 Deluxe Wood Base Key

Get all the details here.

https://amateurlogic.tv/contest/

In this episode, we join Martin Butler M1MRB, Chris Howard (M0TCH), Martin Rothwell (M0SGL) and Bill Barnes (WC3B) to discuss the latest Amateur / Ham Radio news. Colin Butler (M6BOY) rounds up the news in brief and in the episode's feature is SOTA, POTA and Hiking Portable Antennas.

We would like to thank our Patrick Bean, John Rees (GW0JRF) and Robert Swain monthly and annual subscription donors for keeping the podcast advert free. To donate, please visit - http://www.icqpodcast.com/donate

• YOTA Month 2023
• Yes, Learning About Radio Does Matter
• World Radio Conference 2023 Will Impact Amateur Satellite Service
• US Military Explores Wideband Above 100 GHZ
• US Government Blocks Salvage of Titanic's Wireless
• WRTC 2026 becomes an RSGB affiliated Special Interest Group
• 2023 SET Exercise to Test Skills and Emergency Preparedness

Welcome to the 517th installment of Linux in the Ham Shack. In this short-topics episode, the hosts discuss various topics including: blogs.radio, a new ham radio information aggregator, JOTA/JOTI, SDRdock, the upcoming Ubuntu release, LMDE 6 and much more. Thank you for listening and have a great week.

73 de The LHS Crew