My article that describes last year’s SOTA/POTA/VHF contest activation from Pikes Peak appears in the June issue of QST magazine. This VHF/UHF activation occurred on the Saturday of the ARRL June VHF Contest and qualified for Summits On The Air (W0C/FR-004 Pikes Peak) and Parks On The Air (K-4404 Pike National Forest). The article highlights the use of the North America Adventure Frequency of 146.58 MHz.

I made 80 radio contacts that day, on the 6m, 2m, 1.25m, 70cm, and 23cm bands. Not a great score for the VHF contest but quite nice for a VHF SOTA and POTA activation. My primary piece of equipment was the ICOM IC-705, which enabled all modes on the main VHF/UHF frequencies.

If you are an ARRL member, look for the article on Page 58 of the print edition of June QST or the online version. Not an ARRL member? Darn, you should fix that if you want to read articles published in QST.

If you are an ARRL member, please look at the article and consider voting for it in the QST Cover Plaque Award. Thanks!

73 Bob K0NR

The post June QST: SOTA, POTA and VHF Contest appeared first on The KØNR Radio Site.

QRP Labs have announced the new QMX 5 band digital transceiver.

Initially the firmware supports CW and Single tone FSK modes, but may be upgraded to SSB in future firmware updates:

Available as a kit or fully assembled, you can bet that this is going to be the hottest QRP product of the year.
 

Further details:https://shop.qrp-labs.com/qmx

In preparation for something never done before in a CLE, the organziers are asking for your input. See their quest below. I will post the usual 'Hunting For NDBs..." blog outlining all of the rules in a few days but in the meantime, please see if you can help and hopefully participate in the monthly activity.

 Dear Beacon Listener

Joachim and I (Brian) are asking for your help!

We would like to know which active NDB is your NEAREST and which two others are also of special interest to you. 

Maybe you have visited the site of one or more NDBs or you have other special reasons to remember them.

Everyone is invited to send us their own three ‘votes’, so we hope to have a large number of special NDBs to listen for during the coming coordinated listening event (CLE). 

Your choices, with everyone else’s, will decide all of the NDBs in the Seeklist for the event. 

This is our FIRST  ‘YOU-CHOOSE’ CLE (and it will probably be our last!).

You do NOT have to listen yourself in our 292^nd CLE (26-29 May) though everyone will be very welcome to send a log if they want to -  but you will probably be interested in the results, showing who logged your own chosen NDBs and from where.

Please send your choices during the next 7 days to [email protected] (that email address sends only to us, your Listening Event Coordinators Joachim and Brian)

Please help us by using the following format for your votes:

       NDB1: (your nearest?)  Ident:  ABC  345 kHz   Location1        

Ideally, your 3 choices should be NDBs in your own Radio Country,  

       NDB2:                              Ident:  DEF   543 kHz   Location2      

or in ones that share a land border with it.

       NDB3:                              Ident:   GH   432 kHz   Location3        

(e.g. If listening from Oregon, try to choose from OR, WA, ID, NV and CA)

You can find our list of all the Radio Countries at:

          Chosen by (your name):   eg  Brian Keyte

                               https://www.ndblist.info/index_htm_files/countrylist.pdf

                 Your Radio Country:   eg  ENG                                               

                  I can be identified:        *YES / NO                                      

Joachim or I will send an acknowledgment for your ‘votes (see below)   to your sending email address.

 (If someone has already nominated one of your NDBs - unlikely? - we’ll invite you to choose an alternative)

 *The CLE results will NOT show who nominated any of the NDBs.

 However, in the Coordinators’ Comments afterwards we’ll probably mention some of the interesting reasons why NDBs were chosen.

 Please choose NO above if you would NOT want to be identified there.

 For those who also want to listen during the Event, we’ll send the CLE292  EARLY ADVICE  to NDB List in a few days.  That will be followed, after the ‘voting’, by our FINAL DETAILS, including the seeklists showing all of the chosen NDBs.

If there is anything you need more advice about, or if you have any other comments, please feel free to email the two of us at [email protected]

73

  Joachim and Brian

We were looking for a SOTA summit to activate near Salida, so I started to poke around using SOTLAS. There is still plenty of snow at the higher elevations, so we wanted to stay lower. SOTLAS has some useful filtering features that allow you to show only the summits of interest. Initially, I looked for a summit that Joyce/K0JJW and I had not yet activated.

Then I noticed that an unnamed summit (W0C/SC-102) had never been activated, not by anyone. When a summit has never been activated, it is often because it is really difficult to access or it is on private land. Using Gaiagps, my preferred mapping software, I checked out land ownership and the surrounding terrain.

The summit is on land managed by the Bureau of Land Management (BLM). The box labeled Sand Gulch is Colorado State land. This area is clearly on public land without any private property to deal with. We considered two routes to get to the summit. One option is to hike up from the west, which would probably work. But we noticed a 4WD road that approached from the north side that might provide better access. We weren’t sure how difficult the road would be to drive but we decided to give it a try. The road turned out to be easy 4WD, with just a few steep sections that might prove troublesome if the road were muddy. It presented no problem for our stock Jeep Wrangler. There were several side roads not shown on the map that could be a diversion, so having Gaiagps on my iPhone was helpful.

The parking spot for the Jeep is shown on the map above. We were careful with the route finding for this summit, even though it is only a mile or so. We wanted to stay on top of the ridgeline and not get lost in one of the side drainages. Gaiagps on my phone recorded the hike as 1.1 miles one way with an elevation gain of 360 feet, so not very difficult.

The photo below shows the typical terrain as we hiked along the ridge. There was plenty of pinion pine and juniper, along with a surprising number of small cacti. Since the summit is unnamed, we decided to call it Cactus Ridge.

We made contacts mostly on 2m FM (146.52 MHz) using the 50-watt Yaesu FT-90 transceiver driving a 3-element Yagi antenna. I was curious to see how far we could work because the summit is not that high and sits roughly in the canyon of the Arkansas River, between Salida and Canon City. As expected, Salida stations (KD0VHD, K0LPR) were close by and easy to work. Stations in Buena Vista (KF0IHL, KD0MRC, W0BV) also came in quite strong. Our best DX for the day might be N0KM near Center, CO at a distance of 55 miles. But we also worked K0EEP, N0CFM, and KA0SDE camping somewhere near Jefferson, perhaps 60 miles or so, not sure exactly. Although they were due north of us, we had to point the Yagi antenna to the south to work them, apparently getting a nice reflection off one of the high peaks. Similarly, when we worked K0LTH in Guffey (to the north), we had to point the antenna south. We tried to work Amanda/K1DDN in Canon City but were unsuccessful. I thought we might be able to funnel a signal down the canyon to her with a few favorable reflections. No luck with that, but you never know until you try.

Thanks to everyone that listened for us and worked us!

The weather report was sketchy for the day but conditions were cloudy and warm (50 deg F) when we were on the summit at 11:30 AM. Later in the day, after we were back in Salida, we had rain and snow coming down. Springtime in the Rockies.

This was a very enjoyable summit, partially because it had the experience of exploring something new. The easy 4WD road was a pleasant surprise and made us wonder where the other roads in the area lead. At 8280 feet, this summit is only worth two SOTA points. But it’s not about the points, right?

73 Bob K0NR

The post Exploring a New SOTA Summit (W0C/SC-102) appeared first on The KØNR Radio Site.

 The Perfect Bug?

BUT... If we are ham radio operators regularly doing CW, then we spend a lot of time with a morse key under our hand.  I've said this previously, but when you are a CW operator you touch your key more than anything else related to the hobby.  You are moving it many hundreds to thousands of times as you send code.  Your keying becomes part of you and you are intrinsically linked with the ease or difficulty of operating the key for hours at a time.

A New Design

I've not had the chance to try the GHD fully automatic bugs, nor their bugs that use optical contacts.  That would be interesting, but they still fundamentally follow the Vibroplex model.

Preparing for Use

The Intrepid ships with a cable but there's nothing to plug it into on the key.  It's up to the owner to solder the connections.  I understand that some transceivers require different plug wiring but in general they are fairly common.  Be prepared to spend some time soldering under the key to wire it up.

I had some spare 1/8" plugs for projects, and with some heat shrink tubing and a couple pieces of wire I created a tidy connector for the male to male cable shipped with the key.

In Use

I spent about 2 hours practice sending into the practice oscillator that I built.   I had a Vibroplex Deluxe Bug next to it that I alternated with.  The range of DIT speeds on the Intrepid is impressive.  Other makers like Vizkey have created bugs with a similar range of adjustment, and the Deluxe Bug I use has a Vari-Speed that can match the Intrepids speed range, bu the Intrepid is easier to quickly adjust and more importantly can be done one-handed.  It will comfortably go from about 15 wpm up to 35 wpm and with the dwell adjustment makes changing speeds and keeping the DIT dwell correct, is singular.  I don't think any bug can match it in that respect.

It did require a change in how I operate.  The Vibroplex Bug fingerpieces stick out further and I have the habit of placing my index finger out over the top of the Bug.  The Intrepid doesn't allow for that.  I have to curl my index finger down to avoid hitting the bracing for the pendulum.

Because there is less mass in the pendulum it operates with a much lighter touch than Vibroplex Bug.  The pendulm movement is initated with less force and due to the isolation of the pendulum from the paddles you don't feel the pendulum moving as you do with a Vibroplex.  I kinda like the feedback I get from Vibroplex pendulum.  The Intrepid feels more like a single paddle key with an electronic keyer than a bug.

Because of the how the lever is split in the middle, the actual DAH contact is almost dead center in the key rather than toward the front.  It is far closer to the DIT contact than a bug.  I have no way to describe it other than to say it feels as if the DAH and DIT operations are more similar than they are different.

I tend to pivot at my wrist when I operate a Vibroplex bug, to control the timing of DIT to DAH transitions.  That doesn't seem to be as necessary with the Intrepid.  Again, it feels more like a paddle than a Bug.

The DIT contact is a sprung plunger that is always centered.  This is one of the biggest problem areas on a Vibroplex Bug and Begali has masterfully designed the proper contact.  Most Bug operators spend more time adjusting the U-spring to try and get proper contact than any other part of the key.  I assume this level of precision is just not something that Vibroplex wanted to spend the time on in manufacturing.

You'll notice there are spare holes.  I assume they are to allow the frame to be used for left handed operation.

The weights are easy to adjust but I have found that the set screws don't bite the pendulum as firmly as a Vibroplex bug and I have had them come loose a few times. When they accidently come loose they flop to one side and touch the frame, completing the circuit, resulting in a continous carrier. I'm a bit concerned about leaving the bug connected unattended to my tranceiver and having one flop over into transmit while I'm not at the station.

The laser etching is nicely done.  The model name can appear, white, gray or black depending on the angle of light.

The pendulum is hinged at the back of the key, making easy access to the adjustment weights.

Conclusions?

This is a very fine piece of engineering.  It will take me months to decide if stick with it over a Vibroplex Bug, but for now I'm thinking it was a fine birthday gift.

That's all for now

So lower your power and raise your expectations.

Rich, AA4OO https://hamradioqrp.com