We have lost another of the 20%

Looking back, it is ironic that Jim wrote the following about Brett Garrett VE7GM when Brett passed away in August 2018

"They often say that 20% of a given membership do 80% of the work... Brett was one of the 20%, no, more like 5%. An active member of both the Surrey Amateur Radio Club (SARC) and Surrey Emergency Program Amateur Radio (SEPAR), Brett freely shared his knowledge and led Surrey Amateurs to two very successful Field Days."

I can attest to the same about Jim Smith VE7FO and his involvement with VECTOR and SARC.

I first became aware of Jim when I laid the groundwork for the Vancouver Emergency Community Telecommunications ORganization (VECTOR) around 1999. Jim lived in the Dunbar area of Vancouver, and I became aware of his involvement with the Point Grey club, and that he was very knowledgeable about HF.

Jim was an avid contester who enjoyed working all modes -- especially CW and RTTY. A true mentor at heart, he often hosted "newbies" at his Vancouver home to introduce them to contesting. Many a new contester was given real experience operating "in the fray" and encouraged to keep honing their skills.

That knowledge translated into a very successful series of first Field Days for VECTOR. Jim also took on the project of planning the HF tower and antennas at e-Comm, the regional 9-1-1 and dispatch centre. That facility also houses the Vancouver EOC and its Amateur Radio component. Jim was a terrific resource in suggesting what might and might not work for that location, and he got that tower completed and functional. It was also Jim who persuaded me to look at offering our own Basic Amateur Radio classes. Well... 22 years later we are still offering them with the same basic content that we worked on back then, except now they are provided by Surrey Amateur Radio Communications (SARC), on-line, with successful students across Canada and even graduates abroad.

VECTOR Field Day (about 2003) Jim VE7FO as Station Manager in the new VECTOR bus.
Fred VE7CX in the foreground.

Around the time that I left VECTOR for the SARC group in 2004, Jim decided that he too would become a member of SARC. What followed was a mentorship program to introduce new members to contesting, one of Jim's passions. I spent many hours at his QTH working various contests under Jim's expert tutelage.

In one of many articles written for our SARC newsletter 'The Communicator', Jim wrote:

"My own involvement with SARC started when I was recruited by John VE7TI, as a Field Day operator. There are many enjoyable ways of conducting FD which range from everyone sitting around the BBQ, telling stories and making a few contacts to the hard-core contest style where everybody goes all out to WIN. I was told that it would be a hard core, win for Canada situation.  Being a hard-core contester myself I took the bait.

Well, it turned out that the operators, while enthusiastic, didn't have the HF contest experience necessary to achieve the goal.  Nonetheless, it was obvious that the potential was there so, once FD was over, I joined the Club and made a FD training proposal to the Exec with the goal of winning for Canada, which was accepted. 

This training started in October and ran until next year's FD.  It consisted of many formal training sessions including classroom style and participation in the major contests, during which the ops received coaching on the operating techniques for maximizing the number of contacts per hour.

This would be a very significant investment of time for the trainees. This "Get Your Feet Wet" program to provide a low commitment introduction to contesting so that they could see whether or not they liked it."

Jim was instrumental as well in the team organizing what was probably SARC's best scoring Field Day ever. It was in 2015 and, encouraged by Jim, Brett and Stan VA7NF, the Field Day Committee decided that operating QRP might put us in a better scoring position than our usual high power entry.

It took quite a lot of persuasion, but in the end, it was indeed to be QRP. Jim's specialty was consulting propagation predictions and other data to see what we might be able to do with just 5W.  Hoo boy!!  With some adjustment to our antenna lineup, he suggested that we could do very well indeed.

Did we?  We sure did.

Shattered the Canadian record for all categories.

Out of 2,719 FD stations in the US and Canada in 2015, some with more than 10 transmitters and most running 100W, we ranked #91 with our 3 transmitters and 5W.

Altogether a VERY significant achievement which any club would be proud of.

Wouldn't have happened without Jim (or Brett)

It may not be common knowledge that Jim was responsible for a lot of improvements to the premier Amateur Radio Contesting software N1MM+. As an expert contester Jim was able to make suggestions to the programmers that made the software the contesting leader it is today.

Jim always had a liking for analytics, and he took the lead in creating 'Station Manager' training. This role is as important to getting the maximum number of points in a contest as it would be in a real emergency, ensuring that critical traffic got through. The role includes selecting the most useful bands according to shifting propagation, switching antennas, and to assigning operators, so he was constantly monitoring rates, band conditions/solar conditions, greyline, run rates, etc. Everything was graphed and plotted.

Jim was also an active member of ORCA DX and Contest Club, and of the BC DX Club.
As the BC coordinator for the Pacific Northwest Challenge, for many years he looked after the collection of scores for the inter-club contest trophy -- the Pacific Northwest Cup -- and was a frequent attendee at club meetings.

We will miss you, Jim.

Thank you for all that you taught me and others.

We were very fortunate to have had you as a member.

Now Jim is gone

Damn!

Rest in peace.

~ John VE7TI

AmateurLogic.TV Episode 175 is now available for download.

Kay Savetz, K6KJN joins us to discuss the Internet archive.org special project that’s creating a huge online arena of Ham Radio resources. Learn what’s available and how you can enjoy it for years to come.
Tommy updates us on the latest version of the VC4SL battery charger. Emile’s got the scoop on Pi-Star’s Brandmeister DMR API update. Plus a short tribute to our good friend and a truly great Ham, Andy Anderson, AA0WX.

Download
YouTube

Hello and welcome to the 488th edition of Linux in the Ham Shack. In this episode, the hosts interview Ed, N2XDD, and Steve, KC1AWV, of the M17 project. We last had them on the show in March of 2021. Today, we discuss the M17 project, what's new, what's old and what's happening. Thank you for tuning in and we hope you have a great week.

73 de The LHS Crew

In this episode, we join Martin Butler M1MRB,  Dan Romanchik KB6NU, Caryn Eve Murray KD2GUT, Edmund Spicer M0MNG and Ed Durrant DD5LP to discuss the latest Amateur / Ham Radio news. Colin Butler (M6BOY) rounds up the news in brief and in the episode's feature is Part two of our Hamfest Round-up

We would like to thank our monthly and annual subscription donors for keeping the podcast advert free. To donate, please visit - http://www.icqpodcast.com/donate

• Amateur Radio Club Members Assist Law Enforcement
• RSGB Construction Competition
• Ham Radio’s News Information Channels Shrink By Two
• Got a Problem? Ask a Ham!
• If China declares war, These Ham Radio Enthusiasts Could be Crucial
• RSGB AGM 2023
• RSGB Morse Test Coordinator Appointed
• FoxTelem Version 1.12 Released

In your ham radio adventures, you may have heard the words..choke balun, feedline isolation, common mode choke or a 1:1 balun. In my humble opinion different names for the same device. These devices for the most part are present in a system to control common mode currents. I am not an engineer just a simple ham guy trying to sometimes understand some very complicated and technical explanations. 

I hope to keep the next bunch of lines understandable. Here we go...what are common mode currents! Most ham use some form of 52 ohm coax as it's very easy to route, secure and can within reason be placed anywhere. Ideally, RF will flow out on the OUTER SURFACE of the coax INNER CONDUCTOR and flow back on the INSIDE SURFACE of the coax shield. This is what happens in a perfect world but if a system is unbalanced RF current will return on the OUTSIDE of the outer coax braid. It does not return but it radiates.

Dont forget these BEFORE soldering the PL-259