AmateurRadio.com

I checked WSPRnet.org this morning and found quite a lot of activity on 10m so I fired up the K2 and joined the fun with a 1 watt signal. By late afternoon I’d had well over 40 unique call / spotter combinations including good reports from FR1, VK6, VE and the USA.

At lunch time I switched to the K3 (which has a mic attached) to make some SSB QSOs. This was not especially productive. Several US stations running high power to multi-element beams were huge signals over here, but they had huge numbers of European stations calling them and my 100W to an attic dipole had trouble being heard over them. Actually I was only using 80W as I found going up to 100W on 10m caused my homebrew digimodes interface to disconnect itself from the computer. When I was heard, I received good reports from N2JF and NU1O. Perhaps I’d have made more contacts if I’d called CQ.

During my WSPR session I saw that my signal had been spotted by a callsign that rang a bell: G4HBA. A quick look at qrz.com confirmed that my memory was correct: G4HBA was Roger who had also been G8KRT some 35 years ago. During the long hot summer of 1976 when I was G8ILO and only allowed to use 2m and up I was home from university and using an Icom IC-202. Roger was portable from near his place of work in south east Essex and working strings of Continental stations during the endless tropo openings. As I had no antenna at the parental QTH I drove out to find him and on several days I joined Roger and made some contacts under my own call.

One evening I drove out to the site and Roger was not there, so I went to the top of the hill and started operating using my IC-202 and a small beam I made that was supported by the car door. After about half an hour it was getting dark and I noticed torches moving about and closing in on the car. Suddenly I was surrounded by police in uniform! Apparently my car interior light had been spotted from several miles away (as I was on top of a hill) and as I was right next to a radar station someone had wondered what I was up to. That was the end of my operating from that particular site, but I will always remember the amazing VHF propagation of that summer and regret that I never experience such conditions on 2m here.

Not without some difficulty due to my shaking hands, I managed to modify my copy of Roger G3XBM’s XBM-10-2 two transistor transceiver for 10m to his latest version. It is now named the “Chirpy” for reasons that will become obvious when you hear one on the air.

My version is exactly the same as Roger’s except that R3 is a trimpot not a fixed resistor. This allows me to adjust the power output to what I want. I am getting 150mW output on a 13.8V supply, this drops to 50mW with a 9V power source.

So far I have yet to make a contact with the little rig. I have called CQ on 28.060 many times but my signal is yet to be spotted on the Reverse Beacon Network. I don’t know if that is because my signal is too weak or too chirpy for decoding by the skimmer stations. Or perhaps the skimmers don’t receive that far up the 10m band. I will probably have to arrange a sked with a local station who is near enough to hear me.

Propagation on 10m today is as good as I can remember. I made a few nice contacts using SSB including Japan, India and Bahrain. I heard several Chinese stations as well but have yet to work one.

Not really DX but a new country for me was Albania, in the shape of Dik, ZA1E. Decades ago as a teenaged short wave listener I remember hearing Radio Tirana, a huge signal on 7.065MHz, smack in the middle of the 40m phone band. I wonder whether anyone ever listened to its broadcasts? They were pure anti-capitalist tirades read by a woman announcer who sounded like she had a beard and no sense of humour. They actually used phrases like “capitalist running dogs” if I remember correctly. At least Radio Moscow tried to make life on the other side of the iron curtain sound attractive.

I don’t think there was any ham radio activity in communist Albania and there still aren’t all that many hams there now so I was pleased to work Dik for a new one.

Ten metres has been really lively today. I made several contacts including some with the USA. The highlight was working Osama, 9K2OD in Kuwait City who came back to my first call (SSB) even though he had a bit of a pile-up! Perhaps my attic dipole and QTH are not so shabby after all!

It’s great to experience propagation conditions like this again and it cheers me up no end. Real radio therapy!

Propagation has again been excellent on 10m. I heard many US stations and other DX at good strength. I didn’t make many contacts, though. Most of the stations I was hearing were enjoying 5 or 10 minute QSOs. You can use up a lot of time listening to such contacts, especially when you make your call and the station you are hoping to work replies to someone else and not you, so you get to wait another 5 or 10 minutes for the next chance.

Not that I’m complaining. But it doesn’t help that I refuse to use bad operating tactics to get a contact. One station I waited for got angry and went QRT because other European stations were calling over the final of the station he was working. If I can only hear the DX side of the conversation I won’t call until I hear the DX call CQ or say QRZ or listening for any calls. Others do, and too often they get rewarded with a contact. It makes me angry, too.

My first contact of the day was with UT1AN Alex on 10m FM. His QTH is not far from Kharkiv, Olga’s home town. Alex gave me an S9+20dB report.

The last – so far, anyway, was on 10m SSB with W8ERN Angelo in Brighton, Michigan, pictured right. I waited a long time before my call was heard. But it was worth the wait because Angelo replied with are you the G4ILO that wrote the VOAProp software? I ‘fessed up and Angelo told me how much he liked the program.

We also talked about web pages and logging programs. Angelo’s web page is produced using a software program called CommCat Live. You can hear live streaming audio from his station and see a graphical S meter plot of the station he is receiving. He told me my signal – 100w to the attic dipole – was almost peaking 20 over 9 and sure enough when I looked at the screen it was. Perhaps my QTH is not so bad after all.

Here is the proof: W8ERN’s web page snapped while I was in QSO with him.

CommCat certainly adds interest to a ham radio web page. Unfortunately – but not surprisingly – it doesn’t support my home-written logging program KComm.

Propagation remains good on 10 metres. I left the K3 on 28.076 running JT65-HF for most of the day. I made several contacts including N3CAL, WA2CRB, PY8ELO, KE1AF, WB9OTX, WK8G and SV4FFK. The map shows where my signal was heard. I was even spotted by Joe, W6CQZ/4, the author of the excellent JT65-HF software.

JT65 is addictive. It’s also a very relaxing way to make QSOs. It’s ideal for me at the moment because my eyes tire very easily. I end up with blurred or double vision if I read or stare at the computer screen for too long so modes like PSK31 aren’t really a good idea. Thanks to the JT65-HF add-on JT-Alert an alarm sounds if a station I haven’t worked before calls CQ and another sound wakes me up if a station replies to me. This means that I can look out the window or something and only need look at the screen when I have something to do. The print in the JT65-HF program window is nice and big too.

Listening on 28.076 I heard some strange noises which I eventually realized were FM transmissions being received in SSB mode. CBers transmitting out of band I presume.

I don’t suppose many CBers read this blog but come on, guys. It’s none of my business if you choose to operate illegally but if you do, please stay below 28MHz. You may not hear our weak JT65 signals with your FM radios but we sure as hell can hear you.

Update: Just worked Joe “The Man” W6CQZ/4 in Florida. He was running 5W to what I seem to remember him posting once in the JT65-HF Google group is a Hamstick on a mag mount stuck to the roof of his shed. Thank you Joe for the contact and for the fantastic JT65-HF software!