AmateurRadio.com

Introduction:

• Happy New Year! Sorry for the delay in releasing the last several episodes.

Announcements:

• Would you be interested in the return of Resonant Frequency, the Amateur Radio Podcast, if it cost a dollar an episode? Send your thoughts to Richard via email at [email protected].
• Black Sparrow Media now provides an aggregate RSS feed of Linux in the Ham Shack, QSK Netcast, and Resonant Frequency. One feed, three shows! Quite a bargain.
• There is now a (free) Black Sparrow Media mobile app for the iPhone, iPad, iPod Touch and Android! See blacksparrowmedia.net for details, and send us your feedback.
• Andrew, AC8JO, has a blog that discusses Linux, amateur radio, and other topics. Naturally, he mentions our podcast. Thanks, Andrew!
• Leif, KC8RWR, responded to our comments in episode 67 that Apple created CUPS. According to Wikipedia, CUPS, the Common UNIX Printing System, was developed by a Michael Sweet beginning in 1997, and was later adopted by Apple for OS X. In 2007, Apple hired Michael Sweet and purchased his source code. The Apple website provides a somewhat different version.
  • Apple’s Version
  • Wikipedia Article

  Thanks for the information, Leif. Our advice is to pick the story you like and stick with it!

Topics:

• Channel Bonding for Linux
  • Channel bonding combines two or more network interfaces on a host computer for redundancy or greater bandwidth.
  • By bonding two or more Ethernet links to your computer, you get several benefits, including redundancy, so if one network port fails, the other still works, and greater bandwidth when both (or more) links are running.
  • Based on the Link Aggregation Control Protocol (LACP), though called different things depending on vendor, such as EtherChannel or PortChannel.
  • It’s relatively easy to set up. Briefly:
    • You’ll need an Ethernet port for each link, set up and configured in the normal manner. These ports will likely be called eth0, eth1, etc.
    • Install the ifenslave package, which allows you to create a “bond” interface, say bond0.
    • Create modules.conf file to alias the various ethx devices as bonding interfaces.
    • Modify your /etc/sysconfig or /etc/network/interfaces file (depending on your version of Linux) to include an entry that references the bond0 interface.
    • ifup the bond0 interface, and all the component interfaces should come up.
    • Other configuration settings will set up the failover time.
  • Resources:
    • http://www.linux-corner.info/bonding.html for Red Hat-based systems.
    • http://wiki.debian.org/Bonding for Debian-based systems.
    • Ethernet bonding on linux (Debian based)
    • Ethernet Bonding Configuration in Debian
    • Bonding
  • Our hosts then discuss the utility of load balancing between multiple network interfaces.
• More about the apt-cache utility
  • Russ provides more information about the apt-cache utility for Debian-based systems, previously discussed in Episode 69.
  • The basic syntax of the utility is apt-cache [command] [package(s)]. There are many commands you can use, including:
    • policy [package] shows which repository provided, or would provide, a specified package.
    • depends [package] shows all packages in the repositories that depend on the named package, and which other packages would be installed or suggested.
    • showpkg [package] shows reversed dependencies; that is, which packages depend on the named package, and the MD5 checksum of the package.
    • stats  shows some aggregate sums about all the packages in the repositories included on your system. For example, on Russ’ system:

          Total package names: 42814 (856 k)
          Total package structures: 42814 (2,398 k)
          Normal packages: 32874
          Pure virtual packages: 374
          Single virtual packages: 3670
          Mixed virtual packages: 465
          Missing: 5431
          Total distinct versions: 33706 (2,427 k)
          Total distinct descriptions: 33706 (809 k)
          Total dependencies: 200360 (5,610 k)
          Total ver/file relations: 35248 (846 k)
          Total Desc/File relations: 33706 (809 k)
          Total Provides mappings: 6402 (128 k)
          Total globbed strings: 197 (2,192 )
          Total dependency version space: 789 k
          Total slack space: 65.4 k
          Total space accounted for: 11.5 M

    • unmet shows packages in the repositories with unmet dependencies in the tree, that is, if you attempted to install, would fail.
    • show [package] shows meta information about the package. For example, “apt-cache show adduser” returns:

         Package: adduser
            Version: 3.113
            Installed-Size: 1100
            Maintainer: Debian Adduser Developers
            Architecture: all
            Replaces: manpages-it (<< 0.3.4-2), manpages-pl (= 5.6.0)
            Suggests: liblocale-gettext-perl, perl-modules
            Description: add and remove users and groups
            This package includes the 'adduser' and 'deluser' commands for creating
            and removing users.
            - 'adduser' creates new users and groups and adds existing users to
              existing groups;
            - 'deluser' removes users and groups and removes users from a given
              group.
            Adding users with 'adduser' is much easier than adding them manually.
            Adduser will choose appropriate UID and GID values, create a home
            directory, copy skeletal user configuration, and automate setting
            initial values for the user's password, real name and so on.
            Deluser can back up and remove users' home directories
            and mail spool or all the files they own on the system.
            A custom script can be executed after each of the commands.
            Development mailing list:
      
      http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
      
            Homepage: http://alioth.debian.org/projects/adduser/
            Tag: admin::user-management, implemented-in::perl, interface::
            Section: admin
            Priority: important
            Filename: pool/main/a/adduser/adduser_3.113_all.deb
            Size: 217556
            MD5sum: 74c114db96f321f4d097b04ae305600a
            SHA1: 567b8e42dc9b4777ab694f15ca71b7fa159749ef
            SHA256: 3bfea7f2ffcb363e2cc2b701a6e6d2079f7554b4d76194a118916afd2400f5c4

  • Tim Allen’s character in his latest TV show, “Last Man Standing” is a Ham Radio Operator, KA0XTT.

Feedback:

• Kevin, KC9VAN, writes that he’s enjoying the show and just recently received his ham radio license. He also notes that he’s had the most luck with Hewlett-Packard printers under Linux. Thanks, Kevin. Russ has had good luck with Dell printers and generic PCL drivers.
• Leif, KC8RWR, posted several comments about episode 67. He suggests avoiding “all-in-one” printers, and instead, using separate printers and scanners. (I agree! -Ed.) Often, used scanners can be had for very little money. Leif also suggests buying printers with separate cartridges for each color. That way, you’re not throwing away all the colors when just one is empty. He seconds Russ’ suggestion to use a laser printer over inkjet, as the cost per page is less.
• Russ likes the Epson Artisan 835, especially for printing on CDs and DVDs, and it works well with Linux.

Contact Info:

• Contact Richard at [email protected], Russ at [email protected], or both at the same time at [email protected].
• Listen to the live stream every other Tuesday at 8:00pm Central time. Check the LHS web site for dates.
• Leave us a voice mail at 1-909-LHS-SHOW (1-909-547-7469), or record an introduction to the podcast.
• Sign up for the LHS mailing list.
• Sign up for the MAGNetcon mailing list.
• LHS merchandise is available at the Merch link on Web site. Check out the Badgerwear or buy one of the other LHS-branded items at PrintFection.com/lhs or Cafe Press. Thanks!
• Thanks to Dave from Gamma Leonis for the theme music.

Music:

• To be added.