AmateurRadio.com

Most of the time during these full weekend contests I don't get on Friday evening as I find it to be a ZOO with lots of stations sending at a blinding speeds. I don't blame them as they want to get their score rolling so that on Saturday they are well in the game. I started on Saturday morning around 8 in the morning the power output is 5 watts QRP into my attic dipole. It's funny I was sending serial numbers in the teens and I am receiving serial numbers the the triple digits. Now that would be depressing if I was in the contest to make a showing...but I'm in it to have fun!! So how did the first day go......

1. The propagation was.....shall we say (because this is a family blog) crap!! 
2. I was in the contest for a grand total of 5 hours today. 
3. There was some down time as you can tell from fact number 2...software troubles, USB port trouble and K3 updates and the list can go on.  (This is normal contest OMG stuff)
4. The attic dipole once again did very well considering the conditions.
5. The evening once 20m closes down I am done as with the poor conditions for some reason 40m has not been a great band for me with the attic dipole. 

Throughout the day yesterday I was getting propagation updates on my Iphone, things were not looking to good. The decision was made to work on my Elecraft K2 build and not get frustrated with poor propagation conditions. After about 20 minutes of working on the K2 I just was not getting into. Putting the project down for the evening I flipped on the K3 just to check out the band conditions. One of my handy tools for doing that is the Elecraft P3. It's great for seeing the general condition of a particular band. It seemed that 20 meters was not doing to badly considering the conditions. The first station I ran across was H70ORO from Nicaragua. His signal was rather strong considering my attic dipole does not seem to favour Central or South America. His code speed was a comfortable 20 wpm and really not much of a pileup. I made contact with only 1 watt which gave me 2,190 miles per watt contact.
The next (and final) station I contacted was EA4DRV, being pumped from my last 1 watt contact I tried working this Spanish station with 1 watt. It didn't work out as well and the contact was made eventually with 3 watts. After this contact it was time to flip the switch once again and move on to making lunches, arranging morning work clothes and all that other fun stuff.  It goes to show you that even when the propagation is in the dumpers contacts are still there to be had!

CT8/PA4N

I finally had a chance to fire up the K3 on Monday afternoon, it has been a very busy weekend besides I have been reading on most blogs how poor the conditions were....even for the digi folks. It was very windy and cold up this way on Monday with the surprise of snow in the morning. We have some 230KV lines at the back of the house and when they start to blowing around some (I guessing) loose insulator cause me some QRN. The blogs were spot on and the bands were not in real good shape at all besides the power line QRN was not helping either. Later in the afternoon the winds settled and the bands had some CW spikes showing on the P3 here and there.

230KV lines out back

I was on 20m and heard CT8/PA4N who was operating from Sao Miguel island (EU-003) on the Azores.  Frank was only going to be on the island until April 3rd so I wanted to give him a shot. The band was not busy at all, they were not running split and since conditions were not that great I pumped the K3 up to 5 watts. With only one repeat of my call I made the contact. As I was entering the logging info into DxLabs there was a pileup developing so it would seem I got in at the right time.  I also noticed that fellow blogger John N8ZYA has also made contact with the team as well.

Things don't seem to work  when you really need them

I have been reading on many blogs of fellow hams who have had an increase in QRN due to many electrical sources and routers just to mention a few. The enjoyment of ham radio has been for many cut short due to devices blowing a hole in the spectrum!! Yes the companies are suppose to adhere to regulations regarding emissions. BUT both the adhering and the enforcement are very much lacking. We as hams are left to somehow deal with the hash that many modern items produce. I have this feeling it is not going to decrease as time goes on but increase. I have found this is were in my case the MFJ 1026 shines for me. I have a Plasma TV on the main floor and when Julie is cooking, surfing the net or relaxing the TV is on with some music playing in the background. I could go down and ask her to turn the TV off....but....I am a married man not a foolish man. Below is a YouTube video I did today showing how effective the MFJ 1026 is. It was done with my Iphone so some movement will be noticed. (note to self....get a proper recording device)

Signals on 10m this afternoon

Sunday afternoon has seemed to pass just a little faster with setting our clocks ahead last evening an hour. I did find some time to get on the radio (finally after about 5 days off). I tried 10m and according to the P3 screen things were fairly calm for that band. As I was starting up my PC along with the DXlab software I did notice some small and large spikes on the P3. Most of the time when the band is this dead and it was about 2 in the afternoon as well these spikes are just QRM.

EA2LU antennas

Upon investigation to my surprise the first spike was a signal from PV8ADI in Brazil. For some reason I have had troubles with South American station. Not sure if it's the position of the dipole in the attic or just one of those always hard to get spots for me. I gave the station a go with 500mW's but as I expected....nothing. He was having lots of stations (ones I could not hear) come back to him. The flavor of the contact was signal report and move on. I brought the K3 up to 5 watts and gave him a another call. He came back to me and we exchanged reports and moved on.

I was now noticing some stronger signals, the first I tuned in was EA2LU from Spain. I tried Jorge with 500mW's and made the contact without any troubles. He was running a  Yagi at 100 watts. This was a nice contact as we were able to exchange rig info, antenna info and

EA2LU setup

 chat about how well he found my attic dipole preforming along with only 500mW's. I then moved on to another strong signal that had just shown up while my QSO what Jorge was ending. This station was EA1ND calling CQ and again I was able to make the contact with only 500mW's as well. Nacho had told me this was his first contact into Canada and he was very thankful that I came back to him. For sure I will upload to LoTW and Eqsl.  We spoke for a short time about the weather both here and there along with  RST, power and name. These Spanish contacts at 500mW's netted me 7600 miles per watt. Just made contact with FG5FR from Guadeloupe with 500mW's on 15m.  I have been keeping one ear on the rig (headphones) and writing the blog post.....multi tasking who would had thunk.

RFI Friday night

My last post dealt with my PC monitors causing me some grief in the form of RFI to my K3. On Saturday I spent most of the day spinning my wheels trying to find a way to lesson or better yet cure the RFI problem. Below is what I had tried to in order to fix the problem.
1. I changed out the video cables and wrapped them with chokes as well.....did nothing.
2 Moved the monitors to other locations on the operating desk...that was loads of fun and it too did nothing.
3. Tried running the K3 just off battery power and.... nothing.
4. Ran the monitors from the 12 volt Astron power supply and again nothing.
5 Put snap on chokes on ALL cables coming out of PC and the ALL cables from each monitor.....NOTHING!
6. Even tried tin foil on the back of the monitor and grounding it...only made monitor look sci-fi.
7. Put 1:1 balun on the coax coming out of the K3 and still had problem.
8. Tried my Elecraft K2 (maybe just a K3 problem) found same issue with K2.

Sunday...not to bad

9. Plugged monitors into separate AC outlets on different circuits and did not fix issue.
10. Ran a ground up to each monitor and video card on the PC (PC is already grounded) and nothing.
11.Repositioned screen to see if that made any difference I thought it did but turned out not to.
 So that was how my Saturday was spent and from doing all the above I was able to find out a few things that I hope may ring a bell on how to solved the RFI isssue
1. As I move my hand closer to the monitor the RFI increases.
2. When the rig is on the dummy load the RFI is gone.....but so is everything else regarding signals.
Now it's Sunday and I have come to the understanding that I am going to just have to live with the problem. I know where it is coming from that sometimes that is half the battle! I am going to do some reading and thinking about the issue. I came into the shack to just roll the desk back up against the wall and tidy up the room. I then turned on the K3 along with the PC and for some reason the RFI is still there but not as much at all!!! Seems doing nothing is doing something!!

RFI from new monitor

This evening I was on the radio and had the Elecraft P3 up and running as always. I just happend to be looking at the P3 external monitor when my PC's monitors went into sleep mode. I noticed that some signals (now seen as RFI) dropped off the screen. I had noticed these signals before and knew it was RFI but had

Both monitors off

 no idea it was coming from the monitors! My new AOC e2351F LED monitor seems to be the major culprit but the Acer Z233h does add just a little on it's own. If I turn the monitors off (via the monitor button) the RFI is gone or if the monitor goes into sleep mode. You can see from the picture to the right where the RFI was from the tails. So the question now is how does one go about narrowing this down? I have power supplies to each monitor...but would they be the problem if the RFI is gone when the monitors are turned off but supplies are still plugged in? Can you ground a flat screen monitor to my station ground? Could the RFI be traveling down the monitor cables? Well this is just another project to keep me busy. I am lucky that the RFI is not the same on all bands these shots are from 18mhz and it seems to be the worst of them all. Any ideas blog world??