Posts Tagged ‘General’
AmateurLogic 99 Part 1 of 3
January 3rd, 2017 | 
Author:
AmateurLogic.TV Episode 99-1 is now available for download.
Our 2016 Year End Closeout.
Part 1 of 3 from out New Year’s Eve live stream event.
1:08:09
AmateurLogic 98: Christmas 2016
AmateurLogic.TV Episode 98 is now available for download.
Our 2016 Holiday Spectacular.
Peter has tips for taking tests. Emile makes a HF J-Pole antenna. Tommy revives a laptop with ShackBox. George has suggestions on Gifts for Ham Buddies. We sample New Orleans CheeWees. Our Canadian correspondent Mike, VE3MIC is back with some Kristmas Karaoke. Plus we give away prizes and more.
It’s an extra long 2:06:30 of seasonal fun.
AmateurLogic 97: Variety Show
AmateurLogic.TV Episode 97 is now available for download.
Tommy shows us the Android SDR, Peter makes an Auto-Pi, Emile continues his COMM TCPIP Remote, George talks about RG-142 and correct Connector Installation.
1:24:04
Review – BTech APRS-K2 Cable (TRRS/APRS)
by John ‘Miklor’
APRS-K2
It’s long overdue, but there’s finally a TRRS/APRS cable available for radios using a standard Kenwood style K2 connector.
I’ve been wanting to get involved with APRS for a while now, and this made it extremely easy.
APRS-K2 interface cable
The APRS-K2 cable allows you to interface your handheld transceiver with your existing mobile device, including. iPhone, iPad, and Android.
One end of the cable uses the Kenwood style K2 connector, while the opposite end is 
terminated with a TRRS connector. Also included with the APRS-K2 is a Reverse Adapter to insure compatibility with all devices. This adapter allows cable to connect to earlier 3.5MM TRRS standards, such as Nokia.
App Driven
The APRS-K2 cable uses a virtual TNC found in several apps, such as APRSDroid, APRS.fi, and Pocket Packet. Plug in the cable, turn on the VOX, and you’re pretty much set to go.
Product Description
BTECH APRS-K2 TRRS / APRS Cable A simple way to start using APRS by using devices you already own. The BTECH APRS-K2 Cable will quickly connect your radio to APRS by using virtual TNC (app driven) on your tablet or device. The APRS-K2 cable is built with a custom circuit board that will automatically adjust the audio for clear packet transmissions with minimal adjustment; along with protecting your devices from strong over modulated signals.
Along with allowing APRS functionality the APRS-K2 cable can provide a simple interface gateway to allow several features to your radio!
Easily record radio conversations:
By connecting the APRS-K2 cable between your radio and any recording (line-in) device.
Use the APRS-K2 cable as a Mic In Connector:
Set up VOX on your radio to accept any form of incoming audio – such as a Push-to-talk application on a Phone – or a Line-out application from your computer.
Use the APRS-K2 cable to push transmissions over a speaker system:
Easily play audio over a intercom or speaker system from your handheld.
With a backup radio and your own ingenuity, the APRS-K2 cable can serve as an interface for a variety of applications for any amateur. Compatible with Kenwood K2 Accessory Slot Radios (such as BaoFeng, BTECH, Wouxun, TYT) Compatible with all phones, tablets, and computers with 3.5MM Audio In/Out Ports
Includes:
APRS-K2 Cable
Reverse Connector Adapter
Quick Start Guide
Conclusion:
The cable comes with a simple one page instruction sheet which should have you up and running in about 10 minutes after the appropriate app is loaded.
– Plug in the cable
– Set your handhelds volume control
– Turn on the VOX
– Set your handheld to 144.390 (US)
– Activate the app
That’s all it takes. If you’ve been considering building an APRS cable, you might find this an easy Plus and Play alternative.
The APRS-K2 can be ordered from Amazon, or if outside the US, you can go to their website and contact them directly. Baofeng Tech
Too many toys, too little time.
John ‘Miklor’ K3NXU
http://www.miklor.com
