Posts Tagged ‘K4UPG’

Central FL QRP Group

Calling all Central Florida QRP Ops… there’s a small group of us in Orlando that like to gather together on the 2nd Saturday of the month for some breakfast, show n tell, and portable ops in a nearby park.

CFQRP1b 111310

Antenna Tweakers

cflqrp

Operating site

K3RLL

K3RLL in action with KX-1

We just had a nice time of antenna tweaking and operating down by Lake Sylvan. There’s still room for more of you, so mark your calendars and plan to join us on the 10th of December 2010. Leave me a comment if you’d like me to send an email reminder to join us, or if you’d like to get on our list for future outings. Snowbirds are welcome too!

72,

Kelly K4UPG PB #173

Good Customer Service is NOT Dead!

Recently I began a project for a wire vertical antenna and it called for a 20 ft fiberglass or non-conducting pole/mast of some sort. Not to worry as I have a trusty 20 ft Jackite pole in a nice green color. I put the antenna together but the vertical wire was too long and so there was considerable slack wire swinging in the breeze. After some head scratching, I measured my 20 ft Jackite and found it was only 18 ft long!!! YIKES! Did it shrink?

My 20 Foot Jackite Pole

Did it shrink? Nope, it is all good to go!

Thanks to the internet, I was able to send an email to Jackite products and ask if that was normal. In a short time, I received a very nice response from the Jackite vp and an offer that was over the top and way more than I was expecting. It was more than I could accept as I’ve been quite happy with the product otherwise. Turns out that it was a small quality control issue that I can tweak and correct personally.

I get no monetary or other gain out of this, but did want to give credit where credit is due. This level of customer support is often lacking in today’s busy world. I am glad to give a shout out to this company and its products! They do the job and the company stands behind them with good service. Outstanding job Jackite!

72,

Kelly K4UPG PB #173

I am CAD afflicted

Yep, it is confirmed now for sure. Compulsive Antenna Disorder has haunted me since I was first licensed and ran a coax fed 80 meter dipole on multiple bands without a tuner.  The first time the symptoms were noticed by my family and friends was when I got a couple OO tickets for out of band harmonics. Hmmmm… what’s up with that? So a bit of reading and the antenna tweaking began and that’s when it all started.

Soon thereafter I tried to load up a nifty pin from my Junior Prom Boutonnière that reminded me of a triple stacked halo for 1296 Mc (MHz for the newer ones amongst us).  Then it was the handheld yagis for 432 Mc that we used with some military surplus gear that used dynamos so we could chase tornadoes. (We thought if it bounced off the moon, it should bounce off of a tornado!) The saucer sled that became a parabolic for listening to satellite telemetry and on it goes… Compulsive Antenna Disorder has had a firm grip on me for some time now.

Antenna Farm

Am I dreaming? Thanks wiki images!

As a QRP operator, I am always looking for more antenna power. I know that somewhere out there simply MUST be a silver bullet, that magic QRM and pileup busting antenna that makes my 2 watts output sound like a full gallon.

I can say one thing for sure, I know a lot of non-silver bullet antennas, as I have a box full of them.

But they still make a few QSO’s at times and I’m having fun along with a bit of frustration and disappointment as I deal with my CAD affliction.

I’m told that much like telegraph key collectivitis there is no known cure or relief. I share in your grief brothers and sisters…

72,

Kelly K4UPG PB #173

Giving Out Points Again!

Nice weather and an open schedule allowed for some radio time this weekend. The QRP ARCI Fall QSO Party made some buzz so I loaded up the gear and headed out by the lake.  I put up an 88ft doublet in an inverted vee. I shoot a line over a tree limb at about 40ft and use that for the center and have two 17ft Crappie Poles that I use for end supports. That allows me to reorient the antenna to suit the conditions.

Ground Mount Closeup

Ground Mount Closeup

One of the things I threw together is a simple mount for the crappie poles. I use a 2ft piece of PVC with a couple bolts inserted at right angles to one another at the base to keep the pole from going all the way through to the ground. The PVC is attached to a 3ft piece of aluminum angle iron that with 3 stainless steel hose clamps.

crappie pole

Crappie Pole End Supports

The poles are pretty limber and take a bit of a bend but do a good job of handling the 24 gauge teflon wire I use.  As you can see in the pictures, the mounts do the job and don’t cost as much as commercial counterparts.

So it was a good day and I made a few contacts, enjoyed the outdoors and had a nice picnic lunch with my XYL down by the lake between QSO’s.  The bands were pretty decent and I gave points to 20 of the more serious contestants out there.

72,

Kelly K4UPG PB #173

p.s. The Polar Bears will be out and on the air next weekend. Give a listen, hear?

Computer Does Not Save Time

Remember when we used to think computers would save us time?

angry

Why did we think the computer would save us time?

I spent the last 6 hours running updates, fixing the problems the updates created and figuring out how to install the updates that would not install automagically. Grrrrrrr!

Think I need some time to play radio, but I won’t be taking a SDR radio with me for a bit. Grrrrr…. need to recover from the 26 reboots and all the time wasted surfing and reading the small print.

Good thing there is a QRP ARCI event this weekend and the following weekend is our Polar Bear Moonlight Madness Event. Grrrr! I’m ready for some CW. CU on the bands!

72,

Kelly K4UPG PB #173

More Lessons from the Birds

Great Blue Heron

The Biggest Bird in the Pond

On my morning walk yesterday, I had quite a treat. Sure wish I had taken the camera along. On the shore of the flood control pond that flows out into the golf course, were 4 fine Florida water birds. It is not common to see them bunched together like this. A Great Blue Heron, a Little Blue Heron, a Great Egret and a Comorant were lined up in a space of about 8-10 feet. There was a good bit of shoving and jockeying for position and they were working down the bank fishing in the same small spot.

Cormorant

Cormorant is like a living submarine or scuba diver

Made me think of the pileups a DX station creates…      The comorant had a distinct advantage as the only real swimmer and diver of the bunch. It ranged up and down the bank picking off small fingerlings and bullying the other birds by swimming right up to their skinny legs and surfacing. Reminded me of some of the pileup busters I’ve observed from time to time.

At the same time, the little guy, the Little Blue Heron, and the regal looking, very white and tall Great Heron      were left to glean around the edges and pick off the fish that were panic striken and confused by the other birds fishing in the midst. This reminded me of all the contests where I have to dodge the big birds and pick off what I can around the edges.

Funny thing is there are tens of thousands of fish all along the bank, not just where these birds were bunched up. What is it about us that piles us up and forces such fierce competition? Hmmm?

Yep, I am a devoted CPG (Contest Point Giver), who had a nice morning walk and got to see a great outdoors show for free. That is why I love operating QRP portable. Being outside and enjoying the free shows only adds to the enjoyment of the hobby and the friendships made on the air.

72,

Kelly K4UPG PB #173

Great Egret

Tall White Bird is really quite skittish

Little Blue Heron

This little Blue Heron really gets around fast

QRPSPOTS.COM and IHAB Do it Again!

Wow! Great way to bring together a lot of ham radio ops on a Saturday using all sorts of technology!  Way to go! QRPSPOTS.COM is normally used by QRP ops to spot each other when we are out operating portable or to alert others of band openings. It was ALIVE with reports and updates from all over the USA and even a few DX ops adding input too! In addition, several QRP reflectors were buzzing with updates and info. What a great community effort this turned out! Congrats to all and thanks to QRP ARCI for helping get the word out.

iHAB Logo

Iowa High Altitude Balloon Project

One of the 4 States QRP bunch, Terry WA0ITP, provided the 20m beacon again and has some great info on his informative website.

But for me, the coolest thing was listening in on the streaming webcast of  VE3EN and his wonderful IC-7700. Sure wish I had thought of recording a bit or doing a screenshot to share here. But what a treat to listen in and hear the beacon’s signal right up until touchdown. Thanks Kevin for a fun way to eavesdrop on this event since the lawn mowing crew took over my condo’s yard and didn’t allow me to put an antenna out today. There is a ton of info and creative website construction on Kevin’s website and it is worth spending some time looking at the solar cycle data.

Congrats to the team for a successful event today and for bringing so many hams together for a good learning experience and something out of the ordinary. Well done W0OTM, well done indeed!


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor




Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: